···
Log in / Register

What does 94V on tires mean?

4 Answers
DeAllie
07/29/25 5:53am

Tire 94V refers to the load index and speed rating of the tire. The number 94 indicates the load index for a single tire, representing a maximum load capacity of 670 kilograms. The higher the number, the stronger the tire's load-bearing capacity. The letter V denotes the speed rating, indicating that the tire can withstand speeds of up to 240 kilometers per hour. Car tires are one of the essential components of a vehicle, as they directly contact the road surface and work together with the suspension system to absorb shocks during driving. This ensures good ride comfort and smooth driving, maintains excellent traction between the wheels and the road, and enhances the vehicle's traction, braking, and off-road performance.

Was this review help?
8
5
Share
McEmersyn
08/12/25 8:31pm

The 94V marking on tires is actually quite straightforward to understand. The number 94 represents the load index, specifically indicating that a single tire can bear a maximum weight of 670 kilograms. The letter V denotes the speed rating, meaning this tire's maximum safe operating speed is 240 kilometers per hour. These parameters are especially crucial when replacing tires - never arbitrarily lower the standards. Imagine a family road trip with the trunk fully loaded: if the load index is insufficient, the tires can easily overheat and deform. Exceeding the speed rating on highways is even more dangerous, as the tire rubber cannot withstand the intense friction heat at high speeds, risking a blowout. I recommend always cross-checking with the vehicle's manual for the manufacturer's recommended specifications during tire changes - this is fundamental for ensuring driving safety.

Was this review help?
4
0
Share
Expand All
StKingston
10/03/25 8:04am

The parameters 94V are directly related to driving safety. The number 94 at the front is the load index, indicating that each tire can bear a maximum of 670 kilograms. The letter V represents the speed rating of 240 km/h; exceeding this speed limit will cause the tire to fail. These two indicators are like the ID card of the tire, and when selecting tires, they must at least match the original factory parameters. For heavier vehicles like SUVs, it is essential to ensure the load index is sufficient. Owners who frequently drive on highways should pay more attention to the speed rating, as a standard H rating, which only supports up to 210 km/h, may not be adequate. The inner sidewall of the tire usually also displays the production date, such as 1823 indicating the 18th week of 2023. These parameters all help us choose safe and reliable tires.

Was this review help?
4
4
Share
Expand All
ElizabethMarie
11/17/25 2:54am

94V is a key parameter of tires. 94 indicates a maximum load capacity of 670 kg per tire, meaning the total load capacity for four tires on a typical family car is approximately 2700 kg. V represents a speed rating of 240 km/h, ensuring that the tire can handle the temperature and friction during high-speed cruising within this specified range. When replacing tires, 90% of people only focus on size specifications, but these two parameters are actually more critical. For city commuting, a V rating is sufficient, but performance vehicles should opt for a higher rating. Winter tires require additional attention to the snowflake symbol. As long as the load index and speed rating are not lower than the original factory standards, they are acceptable.

Was this review help?
17
2
Share
Expand All
More Forum Discussions

What Causes a Motorcycle to Have Unstable Firing with a 'Tututu' Sound?

When a motorcycle only makes a 'tututu' sound but fails to start during ignition, there are several potential causes to consider. It is necessary to separately check whether the spark plug is faulty, whether there is a misfire or the high voltage is too weak, whether the gasoline is of poor quality, whether the carburetor is clogged (clean the carburetor), and whether the carburetor's air-fuel mixture ratio is improperly adjusted. Additionally, check whether the choke is used incorrectly or has issues preventing the enrichment of the mixture, whether the valve clearance is too small or the valves are not sealing properly, whether there is a flooded cylinder, whether the cylinder pressure is too low, whether there is slight air leakage in the intake pipe or other rubber hoses, and whether the valve timing is incorrect. Any of these issues could lead to this type of malfunction.
8
4
Share

Which Vehicles Are Exempt from Toll Charges on Highways?

Vehicles exempt from toll charges on highways include micro buses, sedans, small buses, small off-road vehicles with 7 seats or fewer, as well as motorcycles permitted to travel on regular toll roads. Below is an introduction to highways: 1. Overview: Highways are classified as high-grade roads, commonly referred to as expressways. 2. Requirements: According to the "Technical Standards for Highway Engineering" by the Ministry of Transport of China, highways are defined as "roads capable of accommodating an average annual daily traffic volume of over 25,000 small passenger vehicles, exclusively designed for high-speed divided-lane travel, with fully controlled access." 3. Development: Although different countries have varying names for highways, they all specifically refer to roads with at least four lanes, separated directional traffic, fully controlled access points, and entirely grade-separated interchanges. Additionally, many countries also classify direct trunk roads with partially controlled access and not entirely grade-separated interchanges as highways.
13
3
Share

Where is the cabin air filter located on the BMW 525Li?

The cabin air filter of the BMW 525Li is located in the engine compartment, adjacent to the engine hood support rod, and can be seen upon opening the hood. Below is relevant information about the cabin air filter: 1. The cabin air filter purifies air entering the vehicle interior from outside, improving air cleanliness. It typically filters impurities in the air, including microscopic particles, pollen, bacteria, industrial exhaust, and dust, preventing them from entering the air conditioning system and causing damage. It protects the health of vehicle occupants and prevents window fogging. 2. A high-quality cabin air filter can absorb fine particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. There are two types of cabin air filters: one without activated carbon and another with activated carbon. The activated carbon cabin air filter not only performs the above functions but also absorbs a significant amount of odors. The general replacement interval for the cabin air filter is every 10,000 kilometers.
20
2
Share

What is the displacement of 60tfsi?

According to the manufacturer's model information, the imported Audi A8L-60-TFSI model has a displacement of 4.0T and a maximum horsepower of 435hp. Here is some extended information: 1. Audi A8L market: The Audi A8L is a car produced by Volkswagen Group of Germany. It is the most high-end luxury car in the Audi lineup, featuring an all-aluminum body with a top speed of 250km/h, positioned to compete with the Mercedes S600 and BMW 7 Series. Currently, there are three models available, all equipped with V6 spark plugs and 5 valves per cylinder. 2. Audi A8L exterior: The all-aluminum body frame structure (ASF) and permanent all-wheel drive quattro are unique technologies of Audi. ASF technology can reduce the vehicle weight by 50% while increasing strength by 60%. Quattro technology can improve the car's off-road capability and stability. The Audi A8L, which combines these two 'unique skills,' can be called the pride of the luxury car lineup.
18
3
Share

On which days of the week is Subject 4 usually taken?

It can be scheduled from Monday to Friday, depending on the appointment time. Relevant details are as follows: 1. Exam content: Subject 4, also known as the Subject 4 theoretical exam or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: besides the road test, a safe and civilized driving test was added, commonly referred to as "Subject 4," which evaluates "driving ethics." Since this test is conducted after Subject 3, it is commonly called the Subject 4 exam. However, there is no official term "Subject 4" in the actual regulations. 2. Exam format: The test paper consists of 50 questions, mainly in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90.
14
5
Share

Can Improper Gear Shifting Damage the Transmission Gears of a Motorcycle?

Yes, shifting gears on a motorcycle without pulling the clutch can cause jerking sensations, gear grinding, and in severe cases, damage the transmission. While riding at high speeds, you can shift gears without using the clutch, but this is only applicable during acceleration. When decelerating, the clutch must be used to avoid damaging the transmission. Transmission gears operate under conditions of high speed, high load, and constantly alternating speed and load. Apart from normal wear, factors such as poor-quality lubricating oil, inadequate lubrication, improper driving techniques, incorrect gear assembly during maintenance (leading to improper meshing), gear impacts, poor tooth meshing, and shaking during startup can all accelerate gear wear and damage. Additionally, wear in other parts of the gear or related components (such as spline grooves in gear holes, bearings, or spline shafts), deformation (e.g., wear or deformation of transmission housing bearing seats, bending of spline shafts), improper assembly of the clutch or drive shaft, and manufacturing defects (like uneven carburization or gear warping) can also hasten gear wear.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.