What does 92h on a tire mean?

3 Answers
Christine
07/23/25 10:01pm
Tire 92h meaning: 92 refers to the load index of the tire, which indicates the maximum weight a single tire can bear. H represents the maximum driving speed of 210 kilometers per hour. Car tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help to absorb shocks during driving, ensuring good ride comfort and smooth driving. Each tire is marked with various parameters during production, such as tire size, load rating, and maximum speed. Different letters on the tire indicate different driving speeds.
Was this review help?
2
4
Share
SanJesse
08/10/25 5:45pm
Hey, I think that 92H marking on the tire is really important—it actually indicates the tire's performance parameters. The 92 is the load index, meaning each tire can bear a maximum weight of 630 kilograms, so when the car is fully loaded with people or luggage, it won't collapse. The H is the speed rating, indicating the tire can safely travel up to 210 kilometers per hour without overheating or blowing out on the highway. I've been driving for over ten years, and ignoring these details could lead to accidents or increased fuel consumption. I recommend having a mechanic confirm the tire code matches the vehicle specifications during maintenance—don't just swap tires based on appearance, safety comes first. Also, check tire pressure regularly; combining this with the index can extend the tire's lifespan.
Was this review help?
7
3
Share
Expand All
OLaila
09/23/25 5:49am
If you enjoy tinkering with cars like I do, just take off a tire and check the sidewall—you'll find markings like 92H. The number 92 refers to the load capacity, for example, 630 kilograms, which should adequately support your vehicle's weight. The letter H is the speed symbol, indicating a maximum speed of 210 km/h—staying within this limit on highways ensures safety. Be cautious when checking load indexes; mismatched tires can damage your suspension. I often refer to online charts for verification and always pay attention to this code when buying new tires, along with maintaining a more frequent maintenance schedule. Remember, sensible driving habits help protect your tires, reducing noise and fuel consumption issues.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How spacious is the rear seating area of the Mercedes-Benz GLK?

When the rear seats of the Mercedes-Benz GLK are folded down, the depth reaches 1674mm, providing a capacity of 1550 liters. Engine of the Mercedes-Benz GLK: Although the Mercedes-Benz GLK continues to use the current flagship 3.5L V6 engine from Mercedes, the further improved compression ratio has led to enhanced performance. The maximum power output reaches 220 kW, and the maximum torque reaches 370 Nm. Interior of the Mercedes-Benz GLK: The interior changes in the Mercedes-Benz GLK are also quite noticeable. The newly designed interior no longer feels as monotonous as the older version. The interior style of the all-new ML-Class is reflected in the 2013 GLK model, with the air vents on the center console redesigned into a refined cross shape. The floor-mounted gearshift has been replaced with a column shifter, and the original gearshift position now offers a very spacious storage compartment.
17
3
Share

Why won't the Cadillac XT5 trunk open/close automatically?

The reasons why the Cadillac XT5 trunk won't open are as follows: 1. Linkage rod or lock cylinder issue: If you frequently use the key to open the trunk, the linkage rod may be broken. Go to a repair shop to have it opened. If you always use the remote control to open the trunk, the lock cylinder may be dirty or rusty. Spray some rust remover into the lock cylinder a few times to open it. 2. Not unlocked: The trunk is difficult to open because it hasn't been unlocked with the remote key. Before opening, it's best to press the unlock button on the key or check if the key battery is dead. 3. Mechanical component failure: The trunk itself may have a problem, such as a broken wire or other issues causing the trunk not to open.
3
2
Share

What type of engine oil is suitable for the Civic?

Civic uses 0W20 full synthetic engine oil. The meaning of 0W20 and the functions of engine oil are as follows: Meaning of 0W20: 0 represents the viscosity of the engine oil, with 0 being the smallest, indicating that the oil has lower viscosity at low temperatures and better fluidity. W stands for winter-grade engine oil. 20 is the oil viscosity, with 20 representing lower viscosity, suitable for low-temperature use. The higher the number, the higher the operating temperature it can handle. The choice of engine oil should be based on the operating temperature of the vehicle. Functions of engine oil: Engine oil lubricates and reduces friction in the engine, assists in cooling, provides sealing to prevent leaks, prevents rust and corrosion, and acts as a shock absorber. It is often referred to as the "blood" of a car. The engine is the heart of the car, containing many metal surfaces that move against each other at high speeds under harsh conditions, with operating temperatures reaching 400 to 600 degrees Celsius. In such extreme conditions, only qualified lubricating oil can reduce wear on engine components and extend their service life.
18
3
Share

Where is the Cruze oil pressure sensor located?

The oil pressure sensor of the Cruze is installed on the right side of the water pump. The engine oil pressure sensor monitors the oil pressure. If the oil pressure is too low, a warning light will appear on the dashboard to alert the driver. Here is some relevant information: 1. Minimum pressure: The minimum oil pressure for the Cruze should not exceed 130 kPa, meaning the acceptable range is between 130 and 350 kPa. However, the measurement should be taken at a water temperature of 80°C, and the normal standard value should be around 250 kPa. 2. Function: Pressure sensors are primarily mechanical devices that indicate pressure through the deformation of elastic elements. However, these structures are large in size and heavy in weight, and they cannot provide electrical output. With the development of semiconductor technology, semiconductor pressure sensors have emerged. They are characterized by small size, light weight, high accuracy, and good temperature characteristics. Especially with the advancement of MEMS technology, semiconductor sensors are becoming more miniaturized, with low power consumption and high reliability.
11
3
Share

What does the automotive DC module mean?

Automotive DC module refers to the direct current power control module. The following is a related introduction: 1. Uses direct current: Since one of the power sources in a car is the battery, which is a DC power source, and the battery must be charged with a DC power source after discharge. Therefore, the generator in the car must also output direct current. 2. Uses low-voltage power: The rated voltage of the automotive electrical system is either 12V or 24V. Currently, gasoline vehicles generally use a 12V power source, while heavy-duty diesel vehicles mostly use a 24V power source. 3. Uses a single-wire system: Normally, the connection between an electrical device and the power source requires two wires, one as the live wire and the other as the neutral wire, to form a circuit. However, all electrical devices in a car are connected in parallel, with good conductivity. 4. Negative grounding: Since cars use a single-wire system, one of the two lines in the electrical system must be replaced by the car's metal body. When wiring, one pole of the power source and one end of the electrical device must be connected to the metal body. This connection is called grounding.
16
5
Share

Detailed Introduction to the Features of the 2021 Corolla Hybrid?

The Corolla Hybrid features three driving modes: EV Electric Mode, ECO Energy-saving Mode, and POWER Dynamic Mode. Below is an introduction to these three driving modes: EV Electric Mode: Press the EV button to enter a state where the vehicle is powered solely by the electric motor. This not only reduces exhaust emissions but also provides a unique driving experience. ECO Energy-saving Mode: This mode offers a more ideal driving state, achieving both practicality and environmental friendliness. POWER Dynamic Mode: Press the POWER button to instantly enhance throttle response sensitivity, delivering robust power, especially when driving on slopes or highways. Brake Energy Recovery System: Hybrid vehicles have a core component called the brake energy recovery system. When releasing the accelerator or lightly pressing the brake pedal, the traditional braking system is not engaged. Instead, the brake energy recovery system provides braking force while converting the vehicle's kinetic energy into electrical energy, which is stored in the battery. During gentle deceleration, a significant amount of braking energy can be recovered and converted into electrical energy for the vehicle's use. However, during hard braking, much of the kinetic energy is wasted as useless heat.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.