What does 91w on a tire represent?

2 Answers
BraxtonAnn
08/27/25 4:12am
Tire 91w indicates that the maximum load capacity of a single tire is 615 kilograms, and the maximum speed it can withstand is 270 KM/H. 91 represents the load index, which is the numerical value indicating the maximum load a tire can bear under specified conditions when inflated to its maximum air pressure. The methods for replacing and maintaining tires are as follows: Method for replacing tires: Park the vehicle in a safe location, turn on the hazard warning lights, and engage the handbrake. Place a triangular warning sign at an appropriate distance behind the vehicle. Retrieve the spare tire, along with the provided wrench and jack, then remove the old tire and install the new one. Methods for tire maintenance: Regularly remove stones stuck in the tire treads, minimize exposure to direct sunlight, frequently check tire pressure, pay attention to suspension maintenance, periodically inspect front wheel alignment, adopt careful driving habits, choose smooth road surfaces while driving, avoid objects that can puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires.
Was this review help?
4
4
Share
BrooklynRose
09/09/25 3:17am
As a car enthusiast, I always love deciphering the alphanumeric codes on tires. In the label '91W', the number 91 represents the load index, indicating that the tire can carry a maximum load of 615 kilograms, which is roughly the total weight limit for a compact car. The 'W' stands for the speed rating, meaning the tire can safely handle speeds up to 270 km/h. Why is this important? Because when selecting tires, you must match the manufacturer's recommended specifications. If your vehicle carries heavy loads or you enjoy high-speed driving, choosing a 91W-rated tire ensures peace of mind, preventing premature wear or blowout risks. I always pay close attention to this when replacing tires. I remember a friend whose tires had too low a load index—after overloading, the sidewalls bulged, costing unnecessary money and compromising safety. I recommend all car owners regularly check tire pressure and tread wear, ensuring the labeled specifications meet factory requirements for a smoother and safer ride.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What does water coating mean?

Automotive water coating is a type of protective film that forms a thin layer after application, capable of resisting minor scratches. Below is relevant information about water coating: Introduction: Water coating is the simplest form of automotive coating, which quickly spreads into a film upon contact with water, hence the name "water coating." A full vehicle coating takes only 5 minutes. It prevents aging, water, stains, acid rain, and minor scratches, acting as a protective shield against vehicle aging. Function: Enhances the brightness of the car paint, forming a crystal-clear protective layer on the surface. It provides stain resistance and a glossy finish, with high-molecular polymers covering the paint to form a protective film. After each wash, the car looks as good as new.
19
5
Share

Is the air pressure the same for 1K and 2K paint spraying?

Spraying 1K and 2K paint requires the same air pressure. Spray painting air pressure: The normal air pressure for spray painting is 0.3~0.6Mpa, whether it's 1K or 2K paint spraying, the air pressure falls within this range. Therefore, the air pressure for 1K and 2K paint spraying is the same, with no difference. Definition of air pressure spraying: Air pressure spraying is a type of spraying method. It involves atomizing the paint with compressed air and spraying it from the nozzle onto the substrate (plastic or other materials). This method is suitable for coating porous materials and substrates that should not be penetrated. Spraying can be further divided into suction-type spraying and pressurized air spraying.
4
5
Share

Where are the motors used in domestically produced Teslas manufactured?

Tesla's electric motors are independently designed and developed, and produced in Nevada, USA. Tesla is an automobile manufacturer from Silicon Valley, USA, and its vehicle models include the Model 3, Model S, Model X, Model Y, and others. Below is an introduction to the Model 3: 1. Overview: The Model 3 is Tesla's entry-level model, a pure electric mid-size sedan. 2. Body dimensions: The wheelbase is 2875 mm, and the length, width, and height are 4694 mm, 1850 mm, and 1443 mm, respectively. 3. Suspension: The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension. The double-wishbone suspension consists of upper and lower wishbones with a linkage between them. This design can reduce body roll and minimize brake dive. The multi-link suspension enhances the tire's contact with the road, thereby improving traction.
14
0
Share

What is the horsepower output of Chery's twin-cylinder EFI engine?

The horsepower output of Chery's twin-cylinder EFI engine is 218 hp. Definition of horsepower: Horsepower is a commonly used unit of power measurement in engineering. It generally refers to metric horsepower rather than imperial horsepower. It is conventionally agreed that 1 metric horsepower equals the work done to lift a 75 kg object 1 meter per second. Metric horsepower defines 1 metric horsepower as the work of 75 kilogram-force meters completed in 1 second. That is: 1 metric horsepower = 75 kilogram-force meters/second = 735 watts. Main characteristics of horsepower: lightweight structure, easy mobility, simple installation, minimal vibration, smooth operation, easy management, fuel-efficient, and easy starting. It is currently the most widely used and highest-volume engine type, with good starting performance and low fuel consumption.
18
1
Share

What are the features of the Sylphy Yuexiang Edition?

The features of the Sylphy Yuexiang Edition are as follows: 1. Configuration: Equipped with an 8-inch floating LCD touch screen, built-in driving recorder, automatic air conditioning, and a new ultra-intelligent connectivity system, as well as voice control for the vehicle, remote start, and other functions. 2. Exterior: The sporty appearance far surpasses the older models, appearing more youthful and dynamic. The segmented waistline on the side is very distinctive, with a slightly increased body length and slightly reduced height, giving it a more poised stance. The interior design and quality significantly surpass the older models, comparable to the former Mercedes-Benz A-Class. 3. Safety: Equipped with seven safety systems and three driving assistance technologies, including lane change assist, lane departure warning, fatigue driving reminder, active braking, and side parking radar, enhancing safety.
1
4
Share

Why does the new horn sound muffled?

New horn sounds muffled for the following reasons: Insufficient battery power: Check the output voltage of the magneto and whether the power is sufficient. When the horn button is pressed, if the horn sounds hoarse, it indicates insufficient battery charge. Horn malfunction: When the power supply is normal, remove the horn's live wire and test for sparks by scratching it against the ground. If there are no sparks, the fault lies between the horn button and the terminal block; if there are sparks, the fault is in the horn. Horn contact burn or poor contact: This can be caused by burnt or poorly connected horn contacts, damaged vibration diaphragm, or incorrect adjustment of the working gap between the vibration disc and the vibration diaphragm. Note: Be extremely careful when checking the circuit to avoid unnecessary short circuits that could burn out the wiring.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.