What does 84h tire mean?

3 Answers
GriffinLee
07/28/25 3:20pm
84h tire refers to the load index and speed rating of the tire, where 84 indicates the load index, meaning the tire can bear a weight of 500 kilograms; h indicates the speed rating, meaning the tire can handle speeds up to 210 kilometers per hour. The functions of a tire are: 1. To bear the weight of the vehicle; 2. To ensure good adhesion between the wheel and the road surface; 3. To improve the vehicle's traction, braking, and off-road capability; 4. To directly contact the road surface and work with the vehicle's suspension to cushion the impact during driving, ensuring good ride comfort and smooth driving. The maintenance methods for tires include: 1. Regularly removing debris from the tread grooves; 2. Checking the tire wear and replacing them in time; 3. Regularly checking the tire pressure; 4. Promptly repairing punctures.
Was this review help?
5
4
Share
McAdalynn
08/11/25 7:43pm
I remember once going on a long trip with friends, the car was loaded with a lot of luggage, and after returning, I noticed abnormal tire wear. Upon closer inspection, I saw the 84H marking. The 84 indicates that each tire can bear approximately 500 kilograms, and the H means the maximum safe speed is 210 kilometers per hour. That experience taught me that overloading or driving too fast can make the tires unable to handle the stress, leading to safety hazards. When choosing tires, it's essential to match them with the vehicle's weight and driving habits, not just go for the cheapest option. For SUVs or vehicles that frequently carry heavy loads, ensuring the load index is sufficient is crucial. Tire maintenance is also key—regularly checking tire pressure and tread can prevent many issues. Behind this small marking lies great wisdom, directly related to our driving safety.
Was this review help?
6
5
Share
Expand All
LeCamila
09/29/25 5:10am
When I first learned to drive, I knew nothing about tires. My instructor explained the meaning of 84H tires: 84 is the load index, approximately 500 kg per tire, and H is the speed rating, meaning it can safely reach a maximum speed of 210 km/h. This marking is usually found on the sidewall of the tire, and when selecting tires, it should match the vehicle manual. Don’t overlook this, as it could lead to blowouts or unstable handling. I recommend checking what markings your car requires before each tire change, especially for vehicles that frequently drive on highways or carry heavy loads. Simply put, 84 indicates the load capacity, and H is the speed limit—remembering these will make driving safer. Also, pay attention to tire pressure regularly, keeping it moderate to extend tire life.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How Much Horsepower Does the Haval 1.5T Have?

Haval 1.5T has a maximum power of 150 horsepower and a maximum torque of 210 Nm. Metric Horsepower: Metric horsepower, also known as PS (Pferdestärke), is entirely a human-defined unit. It is set very close to the value of imperial horsepower. One metric horsepower is defined as the power required to lift 75 kilograms one meter in one second. That is: 1 metric horsepower = 75 kgf·m/s = 735 watts. Imperial Horsepower: The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to represent the power of his steam engine relative to the pulling power of horses. It is defined as "the power required to move 33,000 pounds one foot in one minute," with the standard units being watts (W) or kilowatts (kW).
13
1
Share

What causes the abnormal noise from the Volkswagen Polo belt pulley?

Volkswagen Polo belt pulley abnormal noise reasons are as follows: Insufficient tension: Insufficient belt tension can cause abnormal noise when starting the vehicle. In fact, when the belt tension is insufficient, the belt is also very prone to slipping just like aging. Many car enthusiasts should know that most cars on the market today use automatically adjusted belts, which rely on a large spring design to press the belt and adjust its tightness. When the belt becomes too loose, the friction decreases, leading to abnormal noise due to slipping. Severe wear: Severe belt wear can cause abnormal noise when starting the vehicle. When a car's belt is severely worn, the contact area between the belt and the pulley is significantly reduced. At this point, even slight pressure on the belt will cause it to sink deeply into the pulley groove. When the belt rotates, it becomes very strenuous, and the friction increases significantly. This is similar to a bicycle chain making a harsh noise when it can't turn smoothly. In such cases, it is necessary to replace the belt with a new one as soon as possible.
8
5
Share

Must the tire pressures of all four tires be the same?

The tire pressures of all four tires on a car do not necessarily have to be identical. Generally, the front two tires will have slightly higher pressure than the rear ones. For example, the front tires might be at 2.4, while the rear tires are at 2.3. Here is some information about tire pressure: 1. The normal tire pressure for most vehicles is around 2.2-2.5, but this is just a reference value. For the exact recommended pressure, you should check your vehicle's user manual or the area near the door (B-pillar or C-pillar), where the manufacturer provides the recommended cold tire pressure. 2. If you notice a significant inconsistency in tire pressure while driving at high speeds, you should pull over as soon as possible. Wait for the tires to cool down naturally. Avoid releasing air or splashing cold water on hot tires. Once the tires have cooled, inspect each one individually.
13
3
Share

What Functions Should a Car Air Conditioner Have?

Here are the functions of a car air conditioner: 1. Ventilation System: Its role is to ensure indoor ventilation while the car is in motion, continuously introducing fresh air into the car interior to expel dust, carbon dioxide, and harmful gases from the engine. In cold winters, the fresh air should also be heated to maintain a suitable indoor temperature. 2. Heating System: Its role is to heat the air inside the car or fresh air entering from outside to achieve warming and dehumidification effects. 3. Cooling System: Its role is to lower the interior temperature when the external environment is hot, providing passengers with a cool and comfortable environment. 4. Air Purification System: Its role is to filter the incoming air, continuously removing polluted gases from the car interior to maintain clean air inside the car. 5. Control System: The control system mainly consists of electrical components, vacuum pipelines, and operating mechanisms. Its role is, on one hand, to control the temperature and pressure of the cooling and heating systems, and on the other hand, to manage the temperature, air volume, and airflow direction inside the car to enhance the various functions of the air conditioning system.
16
1
Share

What does ECM mean in a car?

Automotive ECM refers to the Engine Control Module, which has the function of continuously monitoring and controlling the normal operation of the engine. In modern engine management systems, the ECM is the core control component. Below is information about the Engine Control Module: 1. The automotive engine control module is one of the most important automotive electronics. It can provide the engine with the optimal air-fuel ratio mixture and the best ignition timing according to different engine conditions, ensuring the engine always operates in the best state, achieving optimal performance, power, fuel economy, and emissions. 2. The core component of the ECM is a VLSI microcontroller composed of a microprocessor. It uses various corresponding sensors (temperature, pressure, gas-sensitive, displacement) to pick up control parameters and implements automatic control over the engine, fuel injection, ignition, combustion, operation, and emissions through the microcontroller. 3. The automotive engine control module (ECM) interacts with many emission-related components and systems and monitors whether these emission-related components and systems show performance degradation.
4
0
Share

What are the techniques for pressing the accelerator in Chery GX automatic transmission?

Chery GX automatic transmission accelerator pressing techniques are as follows: Lightly press the accelerator pedal: The operation of the accelerator pedal should use the right heel placed on the floor of the driver's compartment as a pivot point, with the sole gently pressing on the accelerator pedal, using the flexion and extension of the ankle joint to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, achieving a light press and slow release. Overtaking situation: If you want to overtake a slower car ahead, you can first release the accelerator, then press it down firmly. At this point, the transmission will automatically downshift to meet the power requirements. After completing the overtaking, release the accelerator, and the gear will return to the appropriate gear for the current speed, which can be controlled solely with the accelerator; if rapid acceleration is needed, then the use of a restricted gear should be combined, directly shifting to a lower gear to cooperate with the accelerator for acceleration.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.