What does 8 to 9 oil mean?

2 Answers
CamillaLee
07/25/25 9:23pm
When users often say 8 oil or 9 oil, it refers to consuming 8 liters or 9 liters of fuel per 100 kilometers. By calculating fuel consumption multiplied by fuel price divided by 100 kilometers, you can determine the cost per kilometer. Since cars often experience various driving conditions such as acceleration, deceleration, braking, and engine idling during actual operation, the constant-speed fuel consumption is usually lower and significantly different from the actual fuel consumption. This difference is even more pronounced for cars frequently used for short-distance urban driving. Below is an introduction to gasoline grades: 1. 90-octane gasoline: Suitable for gasoline cars with an engine compression ratio below 8.5. 2. 92-octane gasoline: Suitable for gasoline cars with an engine compression ratio between 8.6 and 9.9. 3. 95-octane gasoline: Suitable for gasoline cars with an engine compression ratio between 10.0 and 11.5. 4. 98-octane gasoline: Suitable for gasoline cars with an engine compression ratio above 11.6.
Was this review help?
18
4
Share
AlexDella
08/11/25 10:16pm
I've been driving for over thirty years, and the term 'eight to nine liters' is quite common. It refers to the car consuming 8 to 9 liters of gasoline per 100 kilometers. This reflects the car's fuel consumption level. For example, my old car uses about 8 liters on the highway, but in city traffic with congestion, it can easily go above 9 liters. Fuel efficiency is closely related to the size of the vehicle—SUVs generally consume more fuel than compact cars. Driving faster or using the air conditioning can also increase fuel consumption. Remember, regular maintenance and checking tire pressure can help reduce fuel consumption and save some money. Always pay attention to the actual fuel consumption while driving, not just the manufacturer's labeled data, as real road conditions can make a big difference.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a Honda Accord?

Honda Accord models can reset the maintenance light by following these steps: 1. Start the engine. 2. Press and hold the "TRIP" button until the mileage and "OILLIFE" start flashing, then release the button. 3. Sometimes, it may require pressing and releasing the button several times to successfully reset the maintenance light. Below is some relevant information about the Honda Accord maintenance light: 1. When the remaining distance to the next maintenance is less than 1,500 kilometers, the oil inspection indicator light will appear, along with other service items that are due soon. After completing the maintenance service, you can reset the engine oil inspection system information. 2. The purpose of the Accord's maintenance light is to remind the owner that the vehicle requires maintenance. When it lights up, it is advisable to visit an authorized Honda service center as soon as possible. The service personnel will reset the maintenance light using a diagnostic tool after the maintenance, which is another method of resetting the light.
4
3
Share

What are the causes and solutions for a blown main car fuse?

There are 5 main reasons for a blown car fuse, as detailed below: 1. Washing the engine compartment with water: When cleaning the engine compartment, since the fuse box is not perfectly sealed, never rinse it directly with water as this can easily cause a short circuit in the fuse, leading to failure of the entire vehicle's electrical components. Most fuse boxes have clear icons prohibiting water rinsing. If the fuse box is dirty, gently wipe it with a damp cloth. 2. Installing high-power headlights: After modifying headlights, the increased power can easily blow the fuse. It's advisable to promptly replace it with a higher-current fuse and power cables to prevent overheating due to excessive current. 3. Using high-power devices like cigarette lighters: The cigarette lighter fuse is particularly prone to blowing. Generally, cigarette lighters use fuses rated between 15-25A. Since the vehicle voltage is 12V, it's recommended that devices connected to the cigarette lighter do not exceed 300W, and for some smaller cars, not more than 200W. High-power devices like car refrigerators and air pumps should preferably avoid drawing power from the cigarette lighter. 4. Installing high-power audio systems: High-power audio systems can also blow fuses. When installing high-power electrical devices, always pay attention to the current requirements and replace the corresponding fuse accordingly.
1
0
Share

Why Does the Exhaust Make a Popping Sound?

Mainly caused by poor valve sealing. Functions of the car exhaust pipe: Vibration damping, noise reduction, facilitating installation, and extending the lifespan of the exhaust muffler system. Its primary material is stainless steel. The car exhaust bellows, also known as the car exhaust flexible pipe, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. The exhaust pipe connects external elements to the interior of the car, primarily expelling waste gases from the car's interior. Precautions for the car exhaust pipe: The car exhaust pipe is installed between the engine exhaust pipe and the muffler, linking the entire exhaust system together. Its main functions are to reduce vibration and noise, and to some extent, extend the lifespan of the exhaust muffler. Therefore, do not neglect maintenance just because the exhaust pipe is exposed externally. Maintaining the exhaust pipe is essentially a form of maintenance for the car's internal system.
15
0
Share

What color is used motorcycle oil?

Used motorcycle oil is black. Introduction to motorcycle oil: It is the abbreviation of motorcycle engine lubricating oil. Motorcycle lubricating oil usually includes motorcycle engine lubricating oil (referred to as motorcycle oil), motorcycle gear oil, motorcycle shock absorber oil, etc. The functions of motorcycle oil: Lubrication: Oil with a certain viscosity can fill the unevenness on metal processing surfaces and form a strong protective oil film on the metal surface to prevent direct contact between metal surfaces, reducing friction and power loss. Sealing: The oil film formed between the cylinder wall, piston rings, and ring grooves not only has a lubricating effect but also prevents the leakage of the air-fuel mixture during compression and combustion, thereby improving engine power. Cooling: It absorbs part of the heat energy transmitted to the engine after combustion and the heat generated by friction between various components, and then dissipates it into the atmosphere through the engine oil pan or oil cooler.
18
2
Share

What is Wuji Oil?

Wuji oil is Wuji transmission oil. Definition of Wuji transmission oil: Continuously variable transmission oil is a combination of mechanical continuously variable transmission neon and oil, also known as traction oil. In the contact area of the continuously variable transmission force element, the lubricating oil film is subjected to high pressure and high shear strain rate, and also generates heat due to shear, thus placing many special requirements on the oil. Advantages of Wuji oil: Contains the latest high-tech formula (Synerlec), free from water-soluble acids or bases; extremely high viscosity index, with excellent viscosity-temperature characteristics and transmission performance; outstanding friction characteristics, providing high torque and low slip during application; exceptionally superior heat dissipation performance, effectively reducing thermal stress on metals; excellent rust protection, effectively minimizing mechanical corrosion; its special extreme pressure and lubricating additive formulation can effectively prevent adhesion and wear between metal surfaces.
16
4
Share

What Causes the Fuel Gauge Needle on a Motorcycle Dashboard to Stop Moving?

If the fuel gauge needle on a motorcycle dashboard stops moving, it could be due to issues with the fuel float, problems with the fuel gauge wiring, or a faulty sensor. Fuel float issues: For older motorcycles, this is likely a problem with the fuel float, also known as the fuel level sensor. Check if the fuel level sensor plug on the fuel tank is loose, oxidized, or burnt. Observe whether the fuel level sensor sliding process is stuck. Fuel gauge wiring problems: If the fuel level sensor is functioning properly, the issue might lie with the fuel gauge wiring on the dashboard. In this case, remove the dashboard and use a multimeter and a pin to test the corresponding fuel gauge wiring. Faulty sensor: If the fuel gauge on a new motorcycle suddenly drops to zero and remains stationary, it indicates a faulty sensor. You can directly contact the 4S store for a replacement.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.