What does 530t mean?

1 Answers
LeCarlos
07/30/25 7:13am
5 represents the product level, the second digit 3 represents the power, the third digit 0 indicates the output power, and the last letter t stands for turbocharging. Here are some details about 530t: 1. Category: In addition to identifiers like "530t", there are also 1.3, 1.5, 1.6, 1.8, 2.0, etc., which refer to engine displacement. Larger displacement generally means higher fuel consumption. If the number is followed by a t, it indicates a turbocharged engine. Under the same displacement, models with turbocharging (t) have stronger power than those without. For example, a 1.8T car is equivalent to a 2.3L displacement car. 2. Meaning: Some cars are labeled with 530t at the rear. Here, 5 represents the product level - typically the first digit 5 indicates a mid-size car, while 3 represents a compact car. The second digit 3 denotes power, with 3 indicating torque between 250-300Nm. If the second digit is 5, it means torque ranges from 300-500Nm. The third digit 0 signifies output power - 0 stands for low power, while 5 represents high power. The final letter t indicates turbocharging, meaning this model is equipped with a turbocharged engine.
Was this review help?
19
2
Share
More Forum Discussions

How to Drive Out After Parallel Parking?

Try to move the rear of the car as far back as possible within the normal parking space, but avoid direct contact with the vehicle behind. For safety, check if your parked position is closer to the inner side. Turn the steering wheel fully to the left and slowly move the car out. If the vehicle in front is parked normally, there should be no risk of scraping it. Reverse until you're about 20 centimeters away from the rear line. If you're tightly sandwiched, you'll need to slowly maneuver out by moving back and forth repeatedly. You'll definitely get out by alternately turning the wheel left and right while advancing and reversing.
9
1
Share

Where is the coolant temperature sensor located on the Landwind X7?

The coolant temperature sensor on the Landwind X7 is installed in the water jacket of the engine block or cylinder head. Here is an introduction to the Landwind X7 coolant temperature sensor: 1. Function of the Landwind X7 coolant temperature sensor: The Landwind X7 coolant temperature sensor is in direct contact with the coolant inside the car and is used to measure the temperature of the engine coolant. 2. Resistance value of the Landwind X7 coolant temperature sensor: The temperature sensor used in the coolant temperature gauge is a negative temperature coefficient thermistor (NTC), whose resistance decreases as the temperature increases. One wire is connected to the electronic control unit (ECU), and the other is a ground wire.
1
5
Share

Which company manufactures the Jinjila 300 engine?

The Jinjila 300 engine is domestically produced by Benda. Here is some information about Benda: 1. Introduction to Benda: Penta is a well-known European manufacturer of dump truck cylinders, with the Chinese name "Benda". Headquartered in Faenza, Italy, it has over 20 years of experience in cylinder design. 2. Benda's development: Penta was initially founded by five individuals. As the business expanded, Penta gradually grew. It has established factories in Italy, Wuxi (China), India, South Africa, Dubai, Eastern Europe, Australia, and other locations, which are gradually being put into operation.
15
4
Share

How to Turn Off the Auto Start-Stop in ix25?

To turn off the auto start-stop in ix25, simply press the auto start-stop button. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. Taking the 2020 ix25 as an example, its body dimensions are: length 4300mm, width 1790mm, height 1620mm, with a wheelbase of 2610mm and a minimum ground clearance of 154mm. The 2020 ix25 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 84.4kW and a maximum torque of 143.8Nm, paired with a 6-speed manual transmission.
12
2
Share

How to Steer When Exiting Parallel Parking?

First, park the car next to the parking space and adjust the distance between the car body and the parking line. The line should align with one-third of the front of the car. When the front wheels cross the line on the ground, slowly observe the left rearview mirror. When the bottom edge of the mirror touches the line, you can stop. Then, turn on the right turn signal, shift into reverse gear, and observe the right rearview mirror. When the right rear wheel aligns with the parking line, turn the steering wheel fully to the right. Finally, continue watching the left rearview mirror. As soon as the inner corner of the parking space appears in your view, immediately straighten the steering wheel.
6
5
Share

What are the advantages and disadvantages of on-demand four-wheel drive on snowy and icy roads?

On-demand four-wheel drive has the following advantages and disadvantages when driving on snowy and icy roads: 1. Advantages: On-demand four-wheel drive provides better traction at high speeds, with less tire slippage under high torque. The four-wheel drive system also helps to some extent in suppressing side slips on slippery roads and improving vehicle tracking. 2. Disadvantages: Most on-demand four-wheel drive systems are limited by structural flaws when transferring power between the front and rear axles, unable to deliver more than 50% of the power to the rear axle, resulting in incomplete power utilization. Comparatively, the active safety of on-demand four-wheel drive vehicles is not as high as that of full-time four-wheel drive vehicles.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.