What does 50cc mean?

1 Answers
DeAnnie
07/29/25 9:14am
50cc refers to the engine displacement of 50 milliliters or 50 cubic centimeters. The maintenance methods for car engines are as follows: 1. Regularly change the oil and oil filter: The quality of any grade of lubricating oil will change during use. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be moderate (generally up to the upper limit of the oil dipstick). 2. Regularly clean the radiator: Rust and scale can restrict the flow of coolant in the cooling system, reducing heat dissipation and causing the engine to overheat, even leading to engine damage. Therefore, the radiator should be cleaned regularly to remove rust and scale. 3. Regularly clean the crankcase: During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Hence, the crankcase should be cleaned regularly to maintain the cleanliness of the engine interior.
Was this review help?
8
0
Share
More Forum Discussions

Will You Be Fined for Not Wearing a Seat Belt in the Back Seat of a Car?

Car rear seat passengers will be fined for not wearing seat belts. The penalties for not wearing a seat belt are as follows: 1. Driving on highways: If the driver does not use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 2. Vehicles traveling on highways: If passengers do not wear seat belts as required, a fine of 20 yuan will be imposed. 3. Driving on urban expressways: If the driver does not use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 4. Motor vehicle operation: If passengers do not wear seat belts as required, a fine of 5 yuan will be imposed. 5. Driving on roads other than highways or urban expressways: If the driver does not use the seat belt as required, a fine of 50 yuan will be imposed without demerit points. 6. Driving motor vehicles on urban roads with speed limits below 50 km/h: If passengers do not wear seat belts as required and correct the behavior immediately after being pointed out, an oral warning will be given. 7. Order No. 123 stipulates: If the driver does not wear a seat belt as required while driving on highways or urban expressways, 2 demerit points will be recorded for each violation.
6
3
Share

Where is the engine number located on the Great Wall Florid car?

The engine number of the Great Wall Florid car is located on the nameplate in the engine compartment under the front hood. The specific steps to locate this nameplate are as follows: 1. Open the driver's door of the Great Wall Florid car; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Lift up the engine hood of the Great Wall Florid car; 4. Use the support rod to secure the engine hood in place, ensuring it is firmly supported to prevent accidents during operation; 5. Once the hood is propped up, you can find the engine number on the nameplate in the engine compartment. The engine number consists of a prefix, middle section, suffix, and tail, serving as an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry practices, and engine specifications for a batch of identical products.
11
5
Share

Does a Statically Flooded Car Have Significant Impact After Repair?

Statically flooded cars do have certain impacts after being repaired. Below is more information about water-damaged vehicles: 1. Introduction: A water-damaged vehicle refers to a car that has been submerged in water, typically meaning the wiring harness has been soaked, with the water level exceeding one-third of the wheel height, and the vehicle's underbody components being in prolonged contact with water. Commonly referred to as flooded cars, they can be categorized into three levels based on the extent of water immersion: (1) If the water level exceeds the vehicle's chassis, it is called a water-immersed vehicle. (2) If the water level surpasses the oil dipstick, it can be termed a semi-flooded vehicle. 2. Methods to Identify Water-Damaged Vehicles: (1) Smell the interior: Check for a musty odor inside the car. Water-damaged vehicles often have a musty smell in hidden areas such as floor mats, trunk liners, and under the seats, which is difficult to eliminate and usually leaves evidence. If you detect a musty smell, be cautious. If the interior smells unusually fragrant, also be wary, as this might be an attempt to mask the musty odor. (2) Inspect hidden areas of the vehicle: Look for rust or signs of disassembly and replacement on screws in hidden areas; pull out the seats to check for rust or sand in the tracks; pull the seatbelt all the way out to see if there are water stains or dirt at the end.
5
4
Share

Where is the BYD F3 fuel filter located?

The BYD F3 fuel filter is installed at the front of the fuel tank under the vehicle body, secured with disposable clips at both ends. The general replacement interval is 10,000 km, with a mandatory replacement interval of 30,000 km. More details are as follows: 1. Gasoline is as essential to a car as food is to the human body. Without gasoline, the vehicle cannot move. Additionally, if the fuel quality is poor and contains many impurities, it can damage components such as the fuel injectors, fuel pump, and fuel lines in the engine, affecting the normal operation of the fuel system. 2. The fuel filter's role is to remove solid impurities like iron oxide and dust, as well as water, from the gasoline. This reduces the likelihood of clogged fuel injectors and ensures the quality of gasoline entering the fuel system. 3. The fuel filter is a device that filters impurities from gasoline. Vehicles have high cleanliness requirements for fuel, as only clean gasoline can ensure the engine operates properly. If the fuel filter is dirty or clogged, symptoms may include slow or unresponsive acceleration, difficulty starting the car, and sometimes requiring 2-5 attempts to start. 4. Most engines are equipped with disposable, non-cleanable paper fuel filters, with a typical replacement interval of 10,000 km. If the gasoline used has fewer impurities, replacement can be extended to 15,000-20,000 km.
19
0
Share

What is the minimum ground clearance of the 2017 Buick Regal?

2017 Buick Regal has a minimum ground clearance of 152mm. The 2017 Buick Regal is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 170ps, a maximum torque of 252nm, and a maximum power of 125kw. The engine reaches its maximum power at 5600rpm and its maximum torque between 2000 to 4000rpm. It is paired with an 8-speed automatic manual transmission. The dimensions of the 2017 Buick Regal are: length 4902mm, width 1863mm, height 1461mm, with a wheelbase of 2829mm, and a curb weight of 1430kg.
18
1
Share

How to Set the Time on a 2012 Focus?

12-year Focus time setting method: 1. Turn the key to position II; 2. Toggle the adjuster downward until SET is displayed on the instrument panel; 3. Press the SET button, toggle the adjuster downward, and press the SE button. At this point, you can use the adjuster to set the year by toggling up or down. After setting, press the SET button to proceed to adjust the month, followed by the hour and minute. Once all adjustments are complete, press the SET button and select EXIT to return. The Focus is a Ford A-segment family sedan with front-engine, front-wheel-drive configuration, equipped with an 8-speed automatic transmission.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.