What does 26*1.95 tire mean?
3 Answers
26*1.95 indicates the specification of the outer tire, where 26 inches refers to the diameter and 1.95 inches refers to the width of the outer tire. Below are detailed explanations of the relevant content: Introduction: The inner tube specification can be 26*1.95. Generally, there are two specifications available for inner tubes: one is 26*1.75~1.95, and the other is 26*1.95~2.15. Both specifications are typically compatible. Specifications and requirements: First, it must be human-powered; second, no windproof (air resistance reduction) devices are allowed, but a transmission can be installed; third, the vehicle length must not exceed 2 meters, the height must not exceed 75 centimeters, the distance from the central axis to the ground should be 24-30 centimeters, the distance from the central axis to the front axis should be 58-75 centimeters, the distance between the central axis and the rear axis must not be less than 55 centimeters, and the vertical line from the front of the seat to the central axis must not exceed 12 centimeters.
The tire size 26*1.95 is a common specification for bicycle tires. The 26 refers to the rim diameter of approximately 26 inches, commonly used for mountain bikes and similar types; the 1.95 indicates the tire width of about 1.95 inches, with a medium-width design that provides balanced performance on various road surfaces. The size units are all in inches, distinct from the European millimeter system such as 50-559. Compared to wider tires like 2.0 inches, the 1.95 offers good grip but lower rolling resistance, making it suitable for daily commuting or light off-road riding. During installation, rim compatibility should be checked; most 26-inch rims support tires with widths ranging from 1.8 to 2.2, as going too wide may cause installation difficulties or unstable riding. Pressure management is crucial: mountain bikes typically require a range of 40-60 psi to reduce the risk of punctures. Additionally, tire materials, such as rubber type, can affect durability, so choosing the right size helps avoid skidding during sharp turns.
I've been riding bikes for over ten years and have used the 26*1.95 size quite a bit on my mountain bike. The 26-inch wheel diameter is just the right size—agile in turns without being cumbersome. The 1.95 width strikes a good balance, offering solid traction on dirt roads and smooth rolling on city streets. I once tried 26*1.75 tires, but they were prone to slipping in the rain; switching to 1.95 made a noticeable difference in stability. When replacing tires, always check rim compatibility—don’t go wider than the rim allows. Sticking to the same size for spare tires is the safest bet. Proper tire pressure is crucial; too high increases the risk of blowouts, so I always check before each ride. Performance varies by terrain: decent on gravel, slightly less ideal in mud, but overall very practical. Don’t forget to check tread depth during maintenance—replace them when worn to avoid hassle later.
