What does 215/55R17 tire mean?

What Are the Differences Between Gravity Drain and Machine Flush for Transmission Fluid Replacement?

The differences between gravity drain and machine flush for transmission fluid replacement are as follows: 1. Operational and Consumption Differences: Transmission fluid cannot be completely drained by gravity alone, whereas a flushing machine requires additional transmission fluid for the process. 2. Effectiveness Differences: Gravity Drain Method: The new fluid mixes with the old fluid. Machine Flush Method: Not only is the fluid replaced more thoroughly, but the flushing machine also circulates the old fluid, helping to remove metal shavings and debris trapped in the fluid passages and chambers along with the old fluid. Detailed explanations of gravity drain and machine flush methods: 1. Gravity Drain: This involves loosening the drain plug at the bottom of the transmission pan to allow the old fluid to flow out by gravity, followed by refilling with new transmission fluid. Traditional gravity drain typically leaves more residual old fluid due to the transmission's complex internal design and the shape of the transmission pan, which can hold some fluid. To further reduce the amount of old fluid, you can remove the pan by unscrewing the surrounding bolts and clean it. 2. Machine Flush: This method connects a flushing machine to replace the transmission fluid. The vehicle must be started during the process, allowing new fluid to be injected into the transmission while the old fluid is pushed out under pressure. The machine's viewing window clearly shows the transition from old to new fluid until the colors match.

1

Share

What are the differences between the facelift and second facelift of the BMW 3 Series?

The facelifted BMW 3 Series only adds some configurations, with no other differences compared to the non-facelifted models. The most significant changes are subtle upgrades in exterior and interior design. This time, the new 3 Series facelift will introduce the new 340i (replacing the current 335i model) and a 330e plug-in hybrid version. Below is an introduction to the BMW 3 Series: 1. Low-power version: The 2.0-liter turbocharged engine has a maximum power of 115 kW and a maximum torque of 250 Nm. This engine reaches its maximum power at 4500 to 6500 rpm and its maximum torque at 1250 to 4000 rpm. It features direct fuel injection and uses an aluminum alloy cylinder head and block. 2. Mid-power version: The 2.0-liter turbocharged engine delivers 184 horsepower and a maximum torque of 300 Nm. This engine achieves its maximum power at 5000 to 6000 rpm and its maximum torque at 1350 to 4000 rpm. It also features direct fuel injection and uses an aluminum alloy cylinder head and block. 3. High-power version: The 2.0-liter turbocharged engine produces 258 horsepower and a maximum torque of 400 Nm. This engine reaches its maximum power at 5000 to 6500 rpm and its maximum torque at 1550 to 4400 rpm. It is equipped with direct fuel injection and uses an aluminum alloy cylinder head and block. All three engines are paired with an 8-speed automatic transmission (8AT).

14

1

Share

How to Properly Use the EBP Switch in Trucks?

Truck EBP is a multi-mode switch or intelligent driving control switch that can adjust the engine's output torque according to different load conditions, thereby reducing fuel consumption. Here are the specific details: 1. E mode is the Economy mode: Suitable when the truck is empty or lightly loaded, it doesn't require the engine to output full power, achieving fuel economy. 2. B mode is the Standard mode: Suitable for trucks with half-load or general load conditions, maintaining a balance between power and fuel efficiency. 3. P mode is the Power mode: Suitable for heavy loads or when climbing hills, requiring maximum power output to ensure the truck's performance.

2

4

Share

Should I Report to Insurance If an Electric Vehicle Scratches My Car?

You can decide based on the extent of the car's damage. If the damage is minor, there's no need to report it to the insurance; both parties can negotiate to resolve the issue. Below is a partial introduction about car insurance: Components: Car insurance generally includes basic insurance and additional insurance. Basic insurance is further divided into vehicle damage insurance and third-party liability insurance. Coverage details: Vehicle damage insurance covers the loss of your own vehicle; third-party liability insurance covers targets outside your own vehicle, such as people and public property hit, the other party's car, etc.; passenger liability insurance covers the loss of people and property inside your own vehicle; theft insurance covers the loss when your own vehicle is stolen.

16

4

Share

What is the emission standard for a 2011 vehicle?

2011 vehicles comply with the China IV emission standard. Methods to identify China IV standard vehicles include: 1. Check the vehicle's environmental protection label; 2. Query on the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center; 3. Check the vehicle's factory certificate; 4. Make a rough judgment based on the vehicle's registration year; 5. Visit the vehicle management office with the motor vehicle registration certificate for inquiry. The full name of China IV is the National Phase IV Motor Vehicle Pollutant Emission Standard, which regulates the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. Its purpose is to reduce and prevent environmental pollution caused by vehicle emissions, protect the ecological environment, and ensure human health.

3

4

Share

Can the bulging tire of a 2,000 km Elantra be replaced for free?

If there is no collision or external force impact, you can apply for a free replacement at the 4S store. It is recommended to negotiate with the dealer first. 1. Most new car tires have a warranty period of 3 months or 10,000 kilometers. If the tire bulges during the warranty period, whether caused by scratches or quality issues, the consumer should immediately go to the 4S store for inspection. 2. If the inspection results are unsatisfactory, you can ask the 4S store to send the tire to the manufacturer for appraisal and request the manufacturer to issue an appraisal report explaining the cause of the bulging. 3. Consumers can also go to a specialized testing agency for appraisal.

15

3

Share

What does 215/55R17 tire mean?

What Are the Differences Between Gravity Drain and Machine Flush for Transmission Fluid Replacement?

What are the differences between the facelift and second facelift of the BMW 3 Series?

How to Properly Use the EBP Switch in Trucks?

Should I Report to Insurance If an Electric Vehicle Scratches My Car?

What is the emission standard for a 2011 vehicle?

Can the bulging tire of a 2,000 km Elantra be replaced for free?

Is it acceptable to exceed 5,000 kilometers for the first car maintenance?

Do I Need to Replace All the Lug Nuts If One Is Broken?

What brand is Maximus tires?

How Many Kilometers to Replace Spark Plugs