···
Log in / Register

What does 20550r17 tire mean?

4 Answers
AthenaFitz
07/29/25 6:06pm

20550r17 tire represents: 205 refers to the tire width of 205mm; 50 refers to the aspect ratio, where the section height is 50% of the width; the letter r indicates that the tire is a radial tire; 17 refers to the rim diameter of 17 inches. In the identification parameters of tires, there are also some special marks to indicate the type of tire. "x" indicates high-pressure tires; "r" and "z" indicate radial tires. Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle.

Was this review help?
14
0
Share
VanRonan
08/14/25 10:19am

205/50 R17 is a tire specification marking. Let me explain in detail: 205 indicates the tire width is 205 millimeters - the larger this number, the wider the tire, providing better grip for stable high-speed driving; 50 refers to the aspect ratio, meaning the tire height is 50% of the width, approximately 102.5 mm tall - smaller values indicate lower profile tires that offer more responsive handling but a slightly bumpier ride over speed bumps; R stands for radial construction, which is used in most modern tires as it's more fuel-efficient and durable; 17 denotes the rim diameter of 17 inches, specifying the wheel size the tire fits. This specification suits mid-size family cars like the Honda Civic or Volkswagen Golf, balancing comfort and handling. Choosing incorrect specifications can affect fuel efficiency and braking performance, so regular tire pressure checks are advisable. Additionally, tires have load indexes and speed ratings that must be properly matched to ensure safety first.

Was this review help?
2
2
Share
Expand All
LaFinn
10/14/25 4:08am

When you see the numbers 20550r17 while changing tires, don't panic—it usually means 205/50 R17. The 205mm width keeps the car stable, especially on slippery roads without skidding; the 50 aspect ratio means the tire height is slightly less than the width, making steering more responsive; R stands for radial tire, the mainstream design; and the 17-inch rim fits many compact cars. I've driven cars with similar tires and found urban driving smooth with decent bump absorption, but low tire pressure can accelerate wear. Remember, the size must match the original—don't swap randomly, or the suspension will strain and fuel consumption may rise. Paying attention to this spec when buying a car can save on maintenance costs and make daily commutes safer.

Was this review help?
15
3
Share
Expand All
JosiahDella
11/27/25 5:04am

The 205/50 R17 tire specifications are crucial for safe driving. The 205mm width increases the contact patch, reducing braking distance during emergency stops; the 50 aspect ratio indicates a shorter sidewall, enhancing handling stability but offering slightly less cushioning; the R radial construction improves durability; the 17-inch rim ensures proper wheel compatibility. Incorrect tire sizing can cause vehicle vibration, imbalance during turns, and even lead to accidents. Regular tire inspections, such as checking tread wear, help prevent incidents and safeguard family trips.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What procedures are required for changing the color of a car?

The procedures required for changing the color of a car are: 1. Go to the vehicle inspection station to inspect the vehicle and pre-record the information; 2. After queuing up to get a number in the business hall, submit the required documents at the acceptance window: the application form for vehicle modification registration, the identity proof and copy of the vehicle owner, the vehicle registration certificate, the driving license, and a set of chassis number rubbings; 3. Pay the relevant fees at the payment window; 4. Collect the documents at the license and certificate window. Precautions for changing the color of a car include: 1. The body color cannot be the same or similar to that of special vehicles; 2. The area covered by color-changing film cannot exceed one-third of the body area; 3. The body color cannot exceed three types. Before changing the color, you can consult the vehicle inspection station to confirm whether the selected color is allowed for modification. After receiving a positive response, you can proceed with the color change and then schedule an appointment to complete the modification registration procedures.
6
2
Share

How to Remove the Air Filter of Mercedes-Benz R350?

Method for removing the air filter of Mercedes-Benz R350: First, use a screwdriver to pry open the clips on the inner side of the glove box. After opening the glove box, unclip the fasteners of the air filter cover plate. Once the cover plate is removed, the filter element can be seen and taken out. After removal, clean it by blowing off the dust or replace it directly. Taking the Mercedes-Benz R-Class 2006 R350 4MATIC as an example: It is an MPV launched by Mercedes-Benz (imported) with a length, width, and height of 5157mm, 1922mm, and 1661mm respectively, and a wheelbase of 3215mm. It is equipped with a 3.5L naturally aspirated engine, with a maximum power of 200kw, matched with a 7-speed automatic transmission.
1
3
Share

How Many Kilometers Should a Car's Fuel Filter Be Replaced?

Generally, it is recommended to replace the fuel filter every 20,000 kilometers, but this depends on the road conditions and fuel quality. Below is a detailed introduction to the car's fuel filter: 1. The function of the fuel filter is to remove water and impurities from the gasoline. 2. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases, heavier water and impurity particles settle at the bottom of the bowl, while lighter impurities flow with the fuel towards the filter element. Clean fuel then permeates through the fine pores of the filter element into its interior and flows out through the fuel pipe. 3. If the fuel filter is too dirty or clogged, the main symptoms include: slow or no response when accelerating, difficulty starting the car, and sometimes requiring 2-5 attempts to start the engine. In such cases, the fuel filter should be replaced.
9
0
Share

What is the penalty for driving in the wrong direction on the highway?

Driving in the wrong direction on the highway results in a one-time deduction of 12 points and a fine. Penalties for driving in the wrong direction on the highway: According to the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle without following overtaking or yielding regulations, or driving in the wrong direction, results in a deduction of 3 points; driving a motor vehicle on the highway while reversing, driving in the wrong direction, or making a U-turn across the central divider results in a deduction of 12 points. Additionally, motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage may receive a warning or a fine. Precautions for driving on the highway: Maintaining a safe following distance is a prerequisite for ensuring the safety of both vehicles. Unless driving a large vehicle, it is advisable to stay as far away as possible from large vehicles when driving on the highway. Change lanes correctly. Avoid crossing multiple lanes at once, and always observe traffic conditions carefully before changing lanes, using turn signals and honking to alert other vehicles. The emergency lane is reserved for vehicles in need; unless under special circumstances, it should not be used.
6
2
Share

How to Solve the "Ticking" Sound in Focus Engine?

Ford Focus engine making a "ticking" sound may be caused by poor oil quality. Additionally, the "ticking" noise is generally from the valve or fuel injector. The causes and solutions for valve-related noises are as follows: 1. Worn or broken valve spring seats may cause noise—replace the valve spring in this case; 2. Excessive or inconsistent valve clearance can lead to noise—adjust the clearance to resolve the issue; 3. Worn or misaligned valve adjustment screws or loose lock nuts may also produce noise—adjust the screw tightness to fix the problem; 4. Too high or too low oil level in the crankcase can cause noise—check the engine oil level; 5. Worn valve guides may also result in noise—inspect or replace the valve guides; 6. Dirty lifters can cause noise—clean the hydraulic lifters; 7. Out-of-round valve seats or valve faces—grind the valve and valve face; 8. Incorrect oil viscosity selection may also cause noise—switch to a higher viscosity grade oil.
16
5
Share

What is the One-Button Start Smart Key System?

The One-Button Start Smart Key System consists of two parts: keyless entry and one-button start, with the premise of identity recognition and authentication. A switch is installed on the car handle, and as long as you approach the car within about 1 meter, the door lock will automatically open. Keyless entry uses secure identification and authentication technology, which is a contactless automatic identification technology. Each chip is unique, with very high security performance, and the chip cannot be duplicated, making it a secure car anti-theft system. Functions of the One-Button Start Smart Key System: 1. When the owner turns off the engine and leaves the car, simply close the car door, and the door lock will automatically lock and enter the anti-theft state; 2. If any side door or tailgate is not properly locked when leaving, the vehicle will automatically emit a warning sound to remind you to close the door properly.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.