What does 2.3bar mean?

1 Answers
StEvangeline
07/30/25 8:15am
The standard tire pressure for a car is between 2.3bar and 2.5bar. Here are specific details about car tire pressure: 1. Tire Pressure: Tire pressure is not constant; during driving, the increase in tire temperature leads to an increase in internal tire pressure. Tire pressure refers to the air pressure inside the tire, and both excessively high and low tire pressure can shorten the tire's service life. 2. Tire Pressure Monitoring: Tire pressure monitoring is a tire pressure monitoring system that uses wireless transmission technology and highly sensitive micro wireless sensors to collect data on car tire pressure, temperature, etc., whether the car is in motion or stationary. This data is then transmitted to the main unit, displaying real-time digital information about the car's tire pressure and temperature, and alerts the driver with a beep or voice warning when abnormal tire conditions are detected.
Was this review help?
3
4
Share
More Forum Discussions

Does the Accord have a panoramic sunroof?

The Accord is equipped with a panoramic sunroof, with the Premium and Flagship versions featuring an openable panoramic sunroof. Panoramic sunroofs can be categorized by their opening mechanisms into fixed, segmented opening, and full opening types. Here are the details: 1. Fixed panoramic sunroof: The sunroof is made of a single piece of glass and cannot be opened. This type of sunroof is essentially a large glass roof, offering extensive light transmission due to its lack of segmentation. However, since it cannot be opened, it does not provide ventilation. 2. Segmented opening sunroof: This includes dual-panel panoramic sunroofs and stitched panoramic sunroofs. The dual-panel panoramic sunroof features a standard sunroof over the front seats. The stitched panoramic sunroof consists of two overlapping sunroofs, front and rear, with minimal overlap, resembling a single large sunroof. Due to its large size, it can also be classified as a full-opening panoramic sunroof. 3. Full opening sunroof: This type offers the large light transmission area of a panoramic sunroof and matches the functionality of a standard sunroof. However, due to structural constraints, its area is usually smaller than that of segmented types, typically not exceeding half of the roof area. The advantage of a full-opening sunroof is the absence of a middle divider, and it can tilt and slide open.
13
0
Share

What insurance policies are generally required for a new car?

New cars require the following insurance policies: 1. Compulsory Traffic Accident Liability Insurance (CTPL), which is mandatory and required for vehicle registration. CTPL covers compensation for others, but the coverage amount is relatively low; 2. Vehicle Damage Insurance, which is also very important. If you accidentally collide with another vehicle, this insurance can cover the repair costs; 3. Third-Party Liability Insurance, another essential auto insurance policy. You can choose different coverage amounts for this, such as 200,000, 300,000, 500,000, or 1,000,000. The coverage amount represents the maximum compensation limit. For example, if you purchase 200,000 in third-party liability insurance, the maximum compensation in the event of an accident is 200,000. If the damages exceed this amount, the car owner must cover the difference. Naturally, higher coverage amounts result in higher premiums; 4. Scratch Insurance, an add-on to Vehicle Damage Insurance, covers malicious acts by others that cause scratches on the insured vehicle. The premium for Scratch Insurance is not high, but due to the high claim rate for vehicle scratches, some insurance companies stipulate that, except for new cars, used cars must have no more than two claims in the previous year. If there is one claim, the compensation amount cannot exceed 30% of the premium, and the insured vehicle must be no older than five years; 5. Passenger Liability Insurance, which compensates for injuries or fatalities to drivers and passengers in the event of an accident.
3
2
Share

How much fuel does a 280 horsepower engine consume per hour at idle?

280 horsepower engine consumes 4-6 liters of fuel per hour at idle. When the engine is running at idle, the fuel consumption is related to the engine's displacement. Taking a 1.6L engine as an example, at an idle speed of 800 rpm and without additional loads such as air conditioning or radio, if it runs for 1 hour, the fuel consumption is approximately 1011.2 milliliters, which is slightly more than 1 liter. Here are some methods to reduce fuel consumption: 1. Strengthen vehicle maintenance: Vehicle adjustment and maintenance affect engine performance and driving resistance. Owners should regularly perform routine maintenance at auto repair shops, such as checking tire pressure, wheel alignment, adjusting brake friction pads and drum clearance, lubricating points on the chassis, changing engine oil on schedule, and inspecting filters. 2. Avoid prolonged engine idling: Fuel consumption during parking and idling is much higher than during normal driving. Therefore, if the vehicle is not moving for a long time, such as when waiting for someone, it is best to turn off the engine. During cold starts, warming up the engine should not exceed 1 minute, and maintaining low-speed driving for a few minutes is sufficient. 3. Avoid sudden braking and acceleration as much as possible: A smooth and steady driving style is the most fuel-efficient. During the starting phase, avoid pressing the accelerator pedal too hard. The correct method is to accelerate smoothly, and after reaching a certain speed, try to maintain a constant speed as much as possible.
12
1
Share

What engine does the TechArt T7 use?

TechArt T7 uses a 3.6L six-cylinder naturally aspirated engine with aluminum alloy cylinder heads and blocks. It has a maximum horsepower of 305ps, a maximum power of 224kw, a maximum power speed of 6300rpm, and a maximum torque of 400nm. It is paired with an 8-speed automatic transmission. The TechArt T7 is an off-road vehicle under the German brand TechArt. Its body dimensions are: length 4846mm, width 1938mm, height 1712mm, wheelbase 2896mm, fuel tank capacity 100l, and body weight 2030kg.
8
2
Share

What is the difference between a sunroof and a panoramic roof?

The difference between a sunroof and a panoramic roof is reflected in two aspects. Whether it can be opened: The panoramic roof is made of a single piece of glass and cannot be opened, thus it cannot provide ventilation; the car sunroof can be opened, effectively allowing air circulation inside the car and increasing the intake of fresh air. Different maintenance costs: The maintenance cost of a panoramic roof is lower than that of a sunroof. Panoramic roofs are categorized by opening mechanism: Fixed, segmented opening, and full opening. Car sunroofs can be roughly divided into: Sliding-out, built-in, built-in flip-out, panoramic, and curtain types.
19
1
Share

What's the Difference Between 2.0T and 1.5T Engines in Cars?

The differences between 2.0T and 1.5T engines in cars are as follows: 1. Different maximum power: The 1.5T engine has a maximum power of 124KW, while the 2.0T engine has a maximum power of 145KW. 2. Different maximum horsepower: The 1.5T engine has a maximum horsepower of 169Ps, while the 2.0T engine has a maximum horsepower of 197Ps. 3. Different maximum torque: The 1.5T engine has a maximum torque of 285N·m, while the 2.0T engine has a maximum torque of 345N·m. 4. Different RPM for maximum torque: The 1.5T engine reaches maximum torque at 1400-3000rpm, while the 2.0T engine reaches maximum torque at 2000-3200rpm.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.