What does 2.0gdit mean?

1 Answers
RachelLee
07/29/25 3:55pm
2.0 in 2.0gdit represents the displacement, while GDIT stands for turbocharged direct injection engine. A representative example is the Haval H6-GDIT engine, which utilizes exhaust gas turbocharging and cylinder direct injection technology. This engine meets the Euro V emission standard. Below is an introduction to turbocharged engines: 1. Turbo Direct Injection (Turbo-Direct-Injection), abbreviated as TD, is a type of diesel engine. In a turbo direct injection engine, fuel is injected directly into the cylinder via a high-pressure injector. Due to the piston top's concave bowl-shaped design, the fuel forms a spiral-like mixture within the cylinder. 2. To address the inherent shortcomings of SDI, a turbocharging device is added to the diesel engine, significantly increasing the intake pressure. The compression ratio generally exceeds 10, allowing the engine to achieve high torque at very low speeds. Additionally, due to more complete combustion, the content of harmful particles in emissions is greatly reduced.
Was this review help?
17
3
Share
More Forum Discussions

What letter is used for Dongguan's license plate?

Dongguan's license plate uses the letter S. Guangdong Province is abbreviated as 'Yue,' and all license plates within the province start with 'Yue.' The specific letters representing cities are as follows: Yue A is Guangzhou, Yue B is Shenzhen, Yue C is Zhuhai, Yue D is Shantou, Yue E is Foshan (excluding Shunde and Nanhai districts), Yue F is Shaoguan, Yue G is Zhanjiang, Yue H is Zhaoqing, Yue J is Jiangmen, Yue K is Maoming, Yue L is Huizhou, Yue M is Meizhou, Yue N is Shanwei, Yue P is Heyuan, Yue Q is Yangjiang, Yue R is Qingyuan, Yue S is Dongguan, Yue T is Zhongshan, Yue U is Chaozhou, Yue V is Jieyang, Yue W is Yunfu, Yue X is Foshan Shunde District, Yue Y is Foshan Nanhai District, and Yue Z is for vehicles entering the mainland from Hong Kong and Macau. A license plate number consists of three parts: the first part is a Chinese character, which is the abbreviation of the province where the vehicle is registered; the second part is an English letter, representing the city-level code where the vehicle is registered; and the third part is a five-digit serial number. The license plate number is a legal sign registered by the statutory authority, permitting the motor vehicle to drive on the road, and serves as the identification number of the vehicle, displayed at specific positions on the motor vehicle.
1
5
Share

Do you need to wait for a red light at a random U-turn point?

If there is a U-turn signal light and it is red, you must wait to make a U-turn; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this will result in a penalty of 6 points and a fine of 200 yuan. If there is no U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic signal and does not require crossing the pedestrian crossing. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to the left-turn signal. Making a U-turn directly may result in being photographed or penalized by on-site traffic police. When making a U-turn by crossing the pedestrian crossing, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk who have not reached the centerline of the road. Vehicles driving on the left side of the road should slow down and proceed safely to allow pedestrians to cross. Pedestrians waiting outside the boundary line of the motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed safely to allow them to cross. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles failing to stop and yield is a violation and should be penalized. When pedestrians enter the motorized lane (Lane A) via the crosswalk, vehicles in Lane B should slow down and proceed safely. If vehicles in Lane A do not stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians crossing the centerline of the road into the lane. If vehicles do not stop and yield, it is a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the middle of the road must be yielded to by vehicles, which should slow down and proceed safely. Cases where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is permitted. If there is a U-turn signal light, follow its instructions. If there is no signal light, make a U-turn based on the situation, ensuring it does not hinder other vehicles or pedestrians. Intersections without explicit prohibitions: If there are no signs prohibiting U-turns or left turns, a U-turn is allowed. "No explicit prohibition" means the absence of "No U-turn" or "No left turn" signs and no solid centerline. Yellow grid lines: Yellow grid lines indicate no-stopping zones at intersections prone to congestion. While stopping on these lines is prohibited, U-turns are allowed unless there is a central barrier. Intersections with U-turn signal lights: If there is a U-turn signal light, follow it—only turn on green. Signs allowing U-turns but prohibiting left turns: U-turns are permitted even if left turns are prohibited, but "No U-turn" does not mean "No left turn." Things to note when making a U-turn at an intersection: Check road markings: If it's a solid line, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No left turn" sign, even without a "No U-turn" sign, U-turns are not allowed because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted. Always yield to oncoming traffic when making a U-turn. Failing to do so will make you fully liable for any accidents. Near the intersection stop line, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even without explicit signs.
9
1
Share

What is the reason for the failure where the vehicle can go down but not up?

Check whether the lifting contactor in the vehicle control box is engaged. If it is not engaged, check whether the lifting control line is open, has a loose connection, or whether the contactor coil is damaged. If the lifting contactor is engaged but the motor makes no sound, check whether the fire-break switch is damaged. Additional information: When a mechanical failure causes the vehicle to get stuck, the fault point must be located and addressed before operation. Locate the travel switch for upward or downward movement and press it to reset it. Press the lower travel control button, and the upward movement should respond, or open the clutch switch, manually lift the vehicle upward, and then repair the control circuit.
19
4
Share

Why Buy a Civic with a Manual Transmission?

Manual transmissions have all the advantages that automatic transmissions lack. Here is a brief introduction to manual transmissions: 1. Advantages: Manual transmissions are characterized by their simple structure, reliable performance, low manufacturing and maintenance costs, and high transmission efficiency, which theoretically makes them more fuel-efficient. Additionally, due to pure mechanical control, gear shifts are quicker and more responsive to the driver's intentions, offering a more engaging driving experience. 2. Principle: In a manual transmission car, the power input shaft is connected to the clutch, and the power transmitted from the clutch is directly delivered to the gear set via the input shaft, enabling gear shifting.
13
0
Share

How Long After Windshield Replacement Can You Drive?

You can drive 1 to 3 days after windshield replacement. The method for replacing a windshield is: 1. Use a screwdriver to remove the black protective strips around the windshield; 2. Use steel wire to pull apart the sealant around the entire windshield; 3. Use a small blade to scrape off any remaining black sealant on the car; 4. Apply polyurethane sealant to the windshield frame; 5. Install the windshield. Methods for maintaining the windshield include: 1. Use windshield washer fluid according to the season; 2. Apply automotive glass heat insulation film. Additional maintenance tips for the windshield are: 1. Use specialized or suitable wiper blades and replace them promptly; 2. Keep the glass surface clean; 3. Use automotive-specific windshield washer fluid.
20
1
Share

Is a Car Manufactured 9 Months Ago Considered New?

No, a car manufactured 9 months ago can be considered as inventory stock. Below is relevant information about inventory cars: 1. Definition: There is no clear legal definition for inventory cars, but the automotive sales industry does recognize the term 'inventory cars', which generally refers to vehicles that have remained unsold for over a year. 2. How to Identify: Actually, there's no need to identify whether a car is an inventory vehicle or not. Firstly, the manufacturing date is clearly stated on the vehicle's nameplate. Secondly, dealers won't conceal the identity of an inventory car because it's impossible to hide. What needs to be determined is whether the car has been properly maintained and serviced during its inventory period.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.