What does 111V on a tire mean?

What size tires can be fitted on 9.5J wheels?

265mm, 275mm, and 285mm width tires can be fitted on 9.5J wheels. Wheel width (J value) refers to the distance between the two flanges of the wheel. The "9.5" in the wheel specification means 9.5 inches, and "J" represents the shape and height of the wheel flange. The wheel width determines the compatible tire width. Here are the factors to consider when modifying tires: Local traffic regulations: Ensure it doesn't affect vehicle annual inspection approval or warranty; Tire speed and load index; Wheel rim specifications, such as width and offset; Space; Vehicle suspension system; Maintaining the tire's load radius. Tires are the only components of a car that come into contact with the ground, directly affecting driving stability and safety. Being rubber components, tires age over time and need regular replacement. If not replaced for a long time, it can compromise driving stability and safety. Normally, tires can be used for four years once installed, so it's recommended to replace them every four years. When purchasing new tires, always check the production date as tires have a shelf life. Under normal circumstances, the shelf life of unused tires is three years. If the tires have been in storage for over three years since production, they are not recommended for purchase. After installing new tires, it's essential to perform a dynamic balance test on each wheel to prevent abnormal vibrations at high speeds. Such vibrations can adversely affect driving stability and safety. Regularly check tire pressure during daily use. Tire pressure is crucial—it should neither be too high nor too low. Excessive pressure reduces the tire's contact area with the ground, while insufficient pressure can cause wave-like deformation at high speeds. Besides the model, tires also bear the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord. Speed rating: Indicates the maximum speed a tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Wheel rim specification: Shows the compatible wheel rim size for practical use, e.g., standard rim 5.00F.

15

3

Share

What is the actual fuel consumption of the Besturn X80?

The Besturn X80 has a total of 5 models. Among them, the actual fuel consumption of the 1.8T automatic flagship version and the automatic luxury version are 9.9L/100km and 10.2L/100km respectively; the actual fuel consumption of the 2.0L manual luxury version, automatic comfort version, and commemorative version are 8.25L/100km, 10.2L/100km, and 9.15L/100km respectively. Below is relevant information about fuel consumption: Fuel consumption per 100 kilometers: This refers to the fuel consumption of a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data per 100 kilometers for the model. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated based on values determined through repeated tests of a vehicle traveling on specified roads at specified speeds and times, also known as multi-condition road cycle fuel consumption. In the specification, it is stipulated that each cycle includes various driving conditions, and records driving conditions according to various indicators such as specified shift times, parking times, driving speeds, acceleration, braking, and deceleration in each cycle. The values measured by this method are closer to the actual values.

7

5

Share

What is the compression ratio of the Shadow Leopard?

The compression ratio of the Shadow Leopard ranges from 4:1 to 10.5:1. Compression ratio and engine performance: When a gasoline engine is running, the intake is usually a mixture of gasoline and air. During the compression process, the piston moves upward, not only compressing the mixture to reduce its volume but also causing two phenomena: vortex and turbulence. When the gas in a sealed container is compressed, the pressure increases as the temperature rises. If the engine's compression ratio is higher, the cylinder pressure and temperature generated during compression will also be relatively higher, allowing the gasoline molecules in the mixture to combine more thoroughly with the air, resulting in finer fuel particles. Additionally, the effects of vortex, turbulence, and the high compression ratio contribute to better sealing, enabling the spark plug to ignite the mixture completely at the moment of ignition in the next stroke, releasing the maximum explosive energy and converting it into the engine's power output. Conversely, the longer the combustion time of the mixture, the more energy from combustion is converted into heat. According to the principle of energy conservation, the kinetic energy produced by the engine will decrease accordingly. Limitations of increasing the compression ratio: A higher compression ratio in an engine generally indicates better performance, but there are corresponding limitations. At the moment of fuel combustion, the cylinder walls and even nearby structures are affected by the intense combustion. As the compression ratio increases, more of the energy from combustion is converted into kinetic energy, increasing the pressure on the cylinder walls and raising the material requirements. Moreover, when the compression ratio reaches a certain level, the mixture can easily self-ignite under high pressure before the spark plug fires. At this point, the piston has not reached the ignition position, and the massive impact force generated by combustion opposes the piston's movement, causing severe engine vibration, known as knocking. Therefore, the compression ratio cannot be increased indefinitely. Instead, an appropriate compression ratio must be selected to balance all parameters and enhance engine performance.

20

4

Share

Are Bestune and Hongqi related?

Bestune and Hongqi are related, as both are brands under FAW Group, and Bestune is also a sub-brand of Hongqi. FAW, or China FAW Group Corporation, is a large-scale automobile manufacturer in China, formerly known as First Automobile Works. At that time, the Bestune B70 achieved high sales and became a new benchmark for domestic brands. Consequently, the Bestune brand was merged and integrated into the sales network, making Bestune a sub-brand of Hongqi. Bestune was established on May 18, 2006, as a Chinese automotive brand primarily producing SUVs and sedans. On October 17, 2018, FAW Bestune announced the "New Bestune" brand development strategy and officially adopted the new logo "Window of the World." Additionally, the new Bestune brand also introduced a redesigned English logo: "BESTUNE." Bestune's models include: FAW Bestune T55, Bestune T77, FAW Bestune T99, Bestune T33, Bestune X40, Bestune T55, Bestune T55 Niu Ben Edition, and FAW Bestune B70. Hongqi is an automotive brand directly operated by China FAW Group. Hongqi products are divided into four series: the L series (New Noble Hongqi Supreme Car), S series (New Noble Hongqi Coupe), H series (New Noble Hongqi Mainstream Car), and Q series (New Noble Hongqi Business Travel Car). The L series is positioned with models like the Hongqi L5, the only E-class sedan among Chinese automotive brands, which has served major international conferences multiple times. The H series follows a more approachable route, further divided into the H branch (sedans) and HS branch (SUVs). The S series features a pure electric concept sports car, the Hongqi S9, while the Q series targets the business sector, focusing on MPV models.

6

5

Share

What is the recommended tire pressure for motorcycle tires?

Front tire pressure should be 2 bars, rear tire pressure should be 2.5 bars. Motorcycle tire parameters: Front tires are generally 170-180 kPa, rear tires are 200-220 kPa. Hazards of overinflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing ride comfort. Accelerates localized wear of tread center patterns, shortening tire lifespan; increases vehicle vibration, indirectly affecting other components' longevity. Overextends tire cords, reducing carcass elasticity and increasing vehicle load during operation.

20

0

Share

What are the cars with 1.8 displacement?

1.8 displacement cars include the old Passat, old Magotan, old CC, old Civic, etc. Here is the relevant content introduction: 1. Displacement: The larger the displacement of a car engine, the greater the power. However, there is a way to increase engine power without increasing engine displacement, which is turbocharging. 2. Turbocharging technology: Turbocharging technology can increase the engine's air intake without increasing engine displacement. With increased air intake, the fuel injection is correspondingly increased, thereby enhancing the engine's power.

7

5

Share

What does 111V on a tire mean?

What size tires can be fitted on 9.5J wheels?

What is the actual fuel consumption of the Besturn X80?

What is the compression ratio of the Shadow Leopard?

Are Bestune and Hongqi related?

What is the recommended tire pressure for motorcycle tires?

What are the cars with 1.8 displacement?

What is the fuel tank capacity of the Bestune B70 in liters?

How many points are deducted for not using the turn signal during a right-angle turn?

What is the fuel tank capacity of the Besturn X80 in liters?

Why is the Bestune B70 not popular among drivers?