What does 102v tire mean?

1 Answers
EloiseMarie
07/30/25 12:37am
102v tire refers to the speed rating and load index of the tire. 102 indicates that the maximum weight each tire can bear is 860kg, and v represents the maximum speed the tire can withstand, which is 240km per hour. Tires are important components of a car, directly in contact with the road surface, working together with the car suspension to mitigate the impact during driving, ensuring good ride comfort and smooth driving. Tire maintenance methods: 1. Ensure standard air pressure; 2. Control tire temperature; 3. Perform routine checks before driving; 4. Store safely, avoiding exposure to sunlight, oil, acid, and hydrocarbons.
Was this review help?
20
1
Share
More Forum Discussions

How to Sit Comfortably While Driving?

There should be at least a fist's distance between the head and the car roof. When the driver looks straight ahead, their gaze should fall on the center line of the front windshield. Adjust the distance between the seat and the pedals. If the distance is larger, the driver's legs will be more comfortable when extended, but the force applied when stepping on the pedals may be insufficient. After adjusting the seat height and front-back position, proceed to adjust the steering wheel. Position your hands naturally apart for easy turning, while keeping your elbows and shoulders relaxed.
13
4
Share

What to Do When the Car Windows Fog Up Inside the Car?

Solutions for foggy car windows when sitting inside the car include: 1. Use a defogging agent to remove the fog by spraying it evenly on the glass surface and then wiping it clean with a dry towel; 2. Turn on the windshield wipers by setting them to a low speed and let them run until the fog disappears; 3. Change the air source—most cars have a button to either recirculate the air inside the car or draw fresh air from outside; 4. Lower the temperature inside the car. Fog is caused by temperature differences, so matching the interior temperature to the outside temperature can reduce fogging. Increase the car fan setting and lower the temperature as much as possible.
4
2
Share

How to Change the Transmission Oil for a Coaster?

Safety stands, flat-head screwdriver, ratchet wrench, extension bar, manual transmission lubricant, sealant, 1.8L container. Park the car securely, engage the handbrake, and remove the car key. Unscrew the drain nut at the bottom of the transmission housing, use the container to catch the draining transmission oil, then tighten the drain nut back. Pull the hood release switch, pour the manual transmission lubricant into an empty bottle using a funnel, then pour it into the manual transmission through the funnel.
18
3
Share

How to Reset the Maintenance Reminder for Volkswagen Bora?

To reset the maintenance reminder for the Volkswagen Bora, follow these steps: 1. With the key in the off position, hold down the 'set' button and then turn the ignition switch to the on position; 2. A wrench or letter symbol will appear on the dashboard, then release the 'set' button and press the left button once. Taking the 2021 Bora as an example, it is a compact car with body dimensions of length 4663mm, width 1815mm, height 1462mm, and a wheelbase of 2688mm. The 2021 Bora is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
2
2
Share

How to reset the maintenance light on a Kia K3?

The maintenance interval for the Kia K3 is 5,000 kilometers, with a warranty policy of 2 years or 60,000 kilometers. When the maintenance mileage is reached, the Kia K3 maintenance light will illuminate to remind the owner to perform maintenance. The method to reset the Kia K3 maintenance light is as follows: 1. Close all doors and turn the key to the OFF position. 2. Press and hold the right button on the instrument panel with your left hand, while simultaneously turning the key to the ON position with your right hand. A non-flashing wrench symbol will appear on the instrument panel. 3. Release the left hand and press the left button on the instrument panel once. The wrench symbol will disappear, indicating that the maintenance reset has been successfully completed.
1
0
Share

What is the ground clearance of the Haval H2?

The ground clearance of the Haval H2 is approximately 150mm, which meets the standard for a compact SUV. SUVs generally have higher ground clearance compared to regular sedans, enhancing the vehicle's off-road capability while maintaining stability at high speeds. Here are some key points about vehicle ground clearance: 1. Ground clearance and minimum ground clearance are different concepts. Under full load conditions, the distance between the lowest protruding part of the vehicle chassis and the level ground is referred to as the minimum ground clearance, which determines the vehicle's off-road capability. 2. The ground clearance value is not fixed and varies depending on the load. A higher ground clearance improves off-road performance but reduces stability, while a lower ground clearance decreases off-road capability but enhances stability.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.