What does 1.2t mean in car models?

1 Answers
GarrettRose
07/30/25 5:08am
1.2 refers to the car's displacement of 1.2 liters, while the T stands for Turbo, meaning turbocharged. The preceding number indicates the engine's displacement, with 1.2 representing 1.2 liters, and the T signifies forced induction, indicating the engine employs turbocharging technology. Typically, small-displacement engines use turbocharging. Below is relevant information about turbocharged engines: 1. Introduction: A turbocharged engine is one that uses a turbocharger to increase the engine's air intake. A turbocharger (Turbo) is essentially an air compressor. 2. Advantages: Turbocharged engines can significantly enhance power and torque without increasing engine displacement. After installing a turbocharger, an engine's maximum power output can increase by approximately 40% or more compared to a non-turbocharged engine.
Was this review help?
16
4
Share
More Forum Discussions

Should You Wash Your Car Immediately After It Gets Rained On?

You should wash your car immediately after it gets rained on. Here are the details: 1. Reasons: Nowadays, air quality is far worse than before, and rainwater contains many impurities. Therefore, car owners must remember to wash their beloved cars again after they have been exposed to rain. First, manually remove large debris from the car, such as leaves, mud, and small stones. Rinse the car's surface with clean water to remove fine dust and acid rain, then use a soft cloth to wipe away surface dirt. Rainwater mixed with mud from the ground can stick to the car's chassis, and if left uncleaned for a long time, it can cause metal oxidation on the chassis, posing a safety hazard. 2. Purpose of Washing: Generally speaking, washing a car is not just about making it clean and shiny; its main purpose is maintenance. In other words, car washing is the most basic aspect of car maintenance. The timing of car washing can be determined based on weather conditions, road conditions, and some special circumstances.
20
0
Share

How to Open the Fuel Tank Cap of the New Excelle?

Method to open the fuel tank cap of the New Excelle: The fuel tank cap switch is located on the left side of the driver's seat. Pull the fuel filler cap switch upward to release the handle and open the fuel filler cap. To open the fuel filler cap, slowly turn the cap to the left; to close the fuel filler cap, turn it to the right until you hear a click. If there is no fuel tank cap switch, press the fuel tank cap when the car door is unlocked to pop it out. Immediately wipe off any spilled fuel. The Excelle is a compact sedan under the Buick brand. The dimensions of this car are 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm. In terms of power, the Excelle is equipped with two engines: one is a 1.5L naturally aspirated engine with 113 horsepower and a maximum torque of 141 N·m; the other is a 1.3L turbocharged engine with 163 horsepower and a maximum torque of 230 N·m.
17
4
Share

What to Do About Unpleasant Car Door Closing Sounds?

If the car door closing sound is loud, it might be due to poor door sealing. There is a sealing strip on the inner side of the door, which affects the sound when closing. Since the sealing strip is made of rubber, it can harden and age over time, compromising the door's seal and resulting in a louder closing sound. In this case, replacing the sealing strip with a new one can help reduce the noise. Additionally, a loud car door closing sound might be caused by excessive force when shutting the door. Many car owners tend to slam the door shut with great force, which produces a loud noise. In reality, closing the car door doesn't require much force—just enough to ensure it shuts securely. Using excessive force can loosen the hinges and limiters, and even damage internal components, leading to costly repairs. If you slam someone else's car door, the owner will likely be unhappy. Therefore, it's important to close the door gently to avoid unnecessary discomfort.
5
3
Share

What does it mean that parking in reverse cannot be stopped midway?

Parking in reverse cannot be stopped midway, and the following are the specific reasons for analysis: 1. The strictness of the test: During the test, it is necessary to test your driving skills with the highest standards and the strictest attitude. The test itself is to train students to master driving skills proficiently. Not being able to stop midway is also a way to evaluate students' judgment and reaction ability to the road surface when reversing into the garage, so it is understandable. 2. The harm of stopping and turning the steering wheel: Stopping and turning the steering wheel is a wrong driving habit. The coach must have told you when learning to drive that stopping and turning the steering wheel in place puts much more pressure on the power steering pump than turning the steering wheel while moving. Therefore, turning the steering wheel in place causes very serious damage to the power steering pump. Therefore, stopping midway to adjust the direction when reversing into the garage is also the same, which is also an unqualified and undesirable habit.
20
3
Share

What is the battery model for the Buick Regal?

The battery model for the Buick Regal is L2400. Below is some relevant knowledge about car battery maintenance: Avoid long-term outdoor parking: Avoid leaving the car parked in an open-air parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. Limit engine cranking time: Car engines are harder to start in winter. Each attempt to start the engine should not exceed 5 seconds, with at least 15 seconds between attempts. Avoid multiple consecutive starts, as this can cause the battery to over-discharge and burn out. Regular charging: If a battery remains unused for a long time, it will gradually self-discharge and eventually become unusable. Therefore, start the car periodically to recharge the battery. Regular cleaning: Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Regularly inspect the battery components and connecting wires.
12
2
Share

Must a new energy vehicle be fully charged for the first time?

New energy vehicles must be fully charged for the first time. Because when the battery of an electric vehicle leaves the factory and before it is put into use, it has not undergone charging and discharging. To ensure the normal operation of the battery, it is best to fully charge it to allow the vehicle to adapt. Charging methods for new energy vehicles: To date, there are only two charging methods for new energy vehicles: fast charging and slow charging. Fast charging and slow charging are relative concepts. Generally, fast charging refers to high-power DC charging, and most new energy vehicles that support fast charging can reach 80% capacity in about half an hour. Slow charging is AC charging, and the charging process usually takes about 6 to 8 hours. Precautions for charging new energy vehicles: Do not charge immediately after the vehicle has been exposed to high temperatures. Do not charge during thunderstorms to avoid lightning strikes that could cause combustion accidents. It is not recommended to turn on the air conditioning inside the vehicle while charging. Typically, the charging time should be controlled to about 8-10 hours to fully charge the battery. Subsequent uses can involve slightly longer charging times.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.