What does 0-100 km/h acceleration mean for a car?

1 Answers
OSkylar
07/30/25 5:01am
It refers to the time required for a car to accelerate from a standstill (0 km/h) to 100 km/h. Here is expanded content: 1. 0-100 km/h acceleration: Also known as 0-100 km/h sprint. It indicates the time needed for a vehicle to accelerate from complete standstill (0 km/h) to 100 km/h, which is the most direct reflection of a car's power performance. The shorter this acceleration time, the stronger the vehicle's acceleration capability. 2. Impact of fuel type: Since fuel octane ratings fluctuate, differences in methane content can affect 0-100 km/h acceleration results. Variations in remaining fuel during testing also influence vehicle weight and consequently may lead to different test outcomes.
Was this review help?
8
1
Share
More Forum Discussions

How many liters of engine oil should be added to the Geely Emgrand GS 1.4T?

Geely Emgrand GS 1.4T requires 4L of engine oil. The choice of engine oil should be based on the engine's requirements. This vehicle is equipped with a turbocharged engine, and fully synthetic oil can be used. It is recommended to use 5W-30 grade engine oil. The following are the benefits of using fully synthetic oil: 1. It has a wider temperature range. 2. It is less prone to deterioration, has low evaporation loss, and a longer service life compared to conventional oil. 3. It has excellent chemical stability, good radiation resistance, high oil film strength, and less foaming, providing good lubrication and reduced wear. 4. It has minimal thermal degradation, saves fuel, and better protects the engine.
8
1
Share

Where is Hanteng produced?

Hanteng Motors is a domestic automobile brand produced in Jiangxi. Here is some information about Hanteng: 1. Jiangxi Hanteng Automobile Co., Ltd. is a vehicle manufacturing enterprise that produces both traditional fuel-powered vehicles and new energy vehicles. It was established in November 2013 and is located in the beautiful city of Shangrao, Jiangxi. 2. The initial investment in Hanteng Motors was 3.7 billion yuan, covering an area of 422 acres with a construction area of 100,000 square meters. It has an annual production capacity of 100,000 passenger vehicle sets, with an annual industrial main business income of 8 billion yuan. The second phase of the project plans to cover an area of 1,000 acres, and upon completion, it will increase the annual production capacity by an additional 200,000 passenger vehicle sets, with a main business income of 20 billion yuan.
8
5
Share

Which brand does Infiniti belong to?

Infiniti is a luxury car brand under Nissan. Below are the main models of Infiniti: 1. Infiniti DX, Infiniti Essence, Infiniti EX, Infiniti EX25, Infiniti EX35, Infiniti FX, Infiniti G, Infiniti G25, Infiniti G35, Infiniti G37, Infiniti M, Infiniti QX, Infiniti QX56, Infiniti Q50. 2. Dongfeng Infiniti has only two models: Infiniti QX50 and Infiniti Q50L.
15
0
Share

Where is the tire pressure reset button on the Trumpchi GS4?

Trumpchi GS4's tire pressure reset button is located on the steering wheel, at the far left position of the combination switch. The Trumpchi GS4 tire pressure monitoring system is automatically activated. When a tire pressure alarm occurs, manual reset is required. First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "dong" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and prone to deviation, among other factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, excessive friction with the rim causing damage to the bead area, and abnormal wear; Multiplies the friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire side prone to cracks, while generating flexing movements that cause excessive heat, promoting rubber aging, cord fatigue, and breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear.
2
5
Share

What type of oil does the Honda XR-V use?

The original oil specification for the Honda XR-V is SM, 5W-30, and the brand is Honda. If you want to change the oil during later maintenance, you can choose brands such as Shell or Castrol. The viscosity of the oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the oil's kinematic viscosity at 100°C. The higher the number, the better it maintains viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Honda XR-V is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain. Use a specialized wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the engine valve cover filler port, typically filling about three-quarters of a bottle. Start the engine and let it run for 5 minutes, then check for leaks around the oil drain plug and oil filter. If there are leaks, perform repairs. After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
4
1
Share

How many cylinders does the Changan Benben mini engine have?

Changan Benben mini is equipped with a 4-cylinder all-aluminum engine, which belongs to the Changan C10 engine series. It boasts outstanding advantages such as high power, high torque, low fuel consumption, low emissions, and low noise. With a displacement of 1.0 liters, it delivers a maximum power of 51.2 kW and a peak torque of 90 Nm, achieving a specific power output of 51 kW per liter. In terms of body dimensions: Changan Benben mini is an A00-class strategic model launched by Chongqing Changan Automobile Co., Ltd., a subsidiary of China Changan Automobile Group. The vehicle measures 3520mm in length, 1570mm in width, and 1490mm in height, with a wheelbase of 2345mm. Regarding exterior design: Changan Benben mini retains the traditional styling of Changan passenger cars. The front grille prominently features the brand logo and adopts an eagle-inspired front fascia design. The front suspension utilizes MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The use of a torsion beam rear suspension helps maximize rear passenger space and trunk capacity.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.