What does 0-100 km/h acceleration mean?

1 Answers
DelDavid
07/30/25 9:12am
0-100 km/h acceleration refers to the time it takes for a car to accelerate from a standstill to a speed of 100 km/h. Below are some related introductions about 0-100 km/h acceleration: 1. The role of 0-100 km/h acceleration: The 0-100 km/h acceleration can most intuitively reflect a car's acceleration capability, but such acceleration tests are results obtained from straight-line driving and can only serve as a reference for the car's acceleration performance. 2. The advantage of turbocharged engine models in 0-100 km/h acceleration: Among models with the same displacement, those equipped with turbocharged engines have a significant advantage in the 0-100 km/h acceleration test because they deliver more powerful output, and the range of maximum torque output is very wide, allowing the vehicle to achieve maximum acceleration capability at very low RPMs.
Was this review help?
17
3
Share
More Forum Discussions

Can the car audio suddenly lose sound and recover by itself?

The car audio suddenly losing sound cannot recover by itself. If only one speaker has no sound, it may be a speaker problem or a fault in the speaker wiring. If all four speakers are not working, first check if the volume is turned on. If the volume is on but there is still no sound, it is necessary to specifically check the internal hardware issues of the navigation head unit, or it could be that the sound module is damaged. More details about the car electric horn are as follows: 1. Introduction One: The car electric horn produces sound through the vibration of a metal diaphragm. The car electric horn consists of an iron core, magnetic coil, contacts, armature, diaphragm, etc. When the driver presses the horn switch, current flows through the contacts and the coil, generating magnetic force that pulls the armature, forcing the diaphragm to move. The movement of the armature disconnects the contacts, interrupting the current and causing the magnetic force of the coil to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the action of the spring. 2. Introduction Two: The contacts close the circuit again, allowing current to flow through the contacts and the coil, generating magnetic force and repeating the above actions. This cycle repeats continuously, causing the diaphragm to vibrate and produce sound. The resonance plate is rigidly connected to the diaphragm, making the vibration smooth and the sound more pleasant. The working principle of the air horn is to use the airflow of compressed air to vibrate the metal diaphragm and produce sound. Therefore, it can only be used on cars equipped with an air compressor.
10
1
Share

What Information Can Be Seen on Car Glass?

Car glass (taking Volvo models as an example) can display the following information: 1. Model: The first line "VOLVO" indicates that this glass is used for Volvo models. 2. Manufacturer: The second line "FUYAOGROUP" indicates that the manufacturer is Fuyao Group. 3. DOT Certification: The third line "DOT459AS1M644", "DOT" stands for the U.S. Department of Transportation certification, "459" is the safety certification number assigned to Fuyao by the U.S., "AS1" indicates that the light transmittance of this glass is not less than 70%, making it suitable for the front windshield. If it is "AS2", it means the glass can be used for any part except the front windshield, with a light transmittance of not less than 70%. "M644" mainly indicates some type information of the glass, such as color, thickness, etc. Generally, a manufacturer can have multiple groups of numbers, so the same manufacturer often uses different codes. 4. National Certification: The fourth line "43R-001793" should be identified together with "E1". "E" is the abbreviation of the European certification regulation ECE, and "E1" indicates German certification; "43R" plus "001793" means that the product has been certified by a foreign certification body and can be exported abroad. 5. Light Transmittance: The fifth line "TRANSP.70%MIN." has the same meaning as the third line "AS1", indicating that the light transmittance of the glass is not less than 70%. 6. Origin: The sixth line "CHINA" indicates that the glass is produced in China.
19
2
Share

Should Fuel Additive Be Added Before or After Gasoline?

Fuel additive should be added before gasoline for the correct filling sequence. Below is the relevant introduction: Reason: This allows the fuel additive to mix uniformly with the gasoline under the impact of refueling, achieving the best performance. Fuel Additive: A common name for the third-generation gasoline detergent (also known as gasoline detergent or fuel additive), its purpose is to solve the carbon deposit issues in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal condition, and compensate for certain deficiencies in gasoline properties while imparting new beneficial characteristics (improved atomization, reduced wear, engine protection, lower emissions, etc.).
14
3
Share

What are the body dimensions of the New Baojun RM5?

The New Baojun RM5 has a body length of 4705mm, width of 1806mm, height of 1625mm, and a wheelbase of 2750mm. It is positioned as a mid-size SUV. In terms of power, the New Baojun RM5 is equipped with a 1.5T inline four-cylinder engine, delivering a maximum power of 108kW and a maximum torque of 250Nm, paired with a 6-speed manual or CVT transmission. In terms of features, the New Baojun RM5 not only comes with the New Baojun Mobile Internet System featuring dual large screens but also includes adaptive cruise control, tire pressure monitoring, automatic air conditioning, 360-degree panoramic imaging, wireless phone charging, electronic parking brake with auto hold, and the transmission offers snow mode and economy mode.
10
2
Share

What is the bolt pattern data for the Audi Q7 wheel hubs?

The bolt pattern data for the Audi Q7 wheel hubs is 5x112mm. The professional term for wheel hub bolt pattern is Pitch Circle Diameter (PCD), which refers to the diameter of the circle formed by the centers of the wheel's lug bolts. Most wheel hubs typically have either 5 or 4 bolt holes, with varying distances between them. The wheel hub bolt pattern indicates the mounting points for wheel installation - calculated by multiplying the number of lug holes by the diameter of the circle formed by these holes, representing the distance between the bolt fixing surface and the geometric center line. Regarding the chassis system, the Audi Q7 is equipped with quattro permanent all-wheel drive. This system ensures optimal traction and lateral stability through instantaneous torque distribution, serving as the prerequisite for high-performance handling stability.
19
1
Share

Can a Refrigerator Be Placed in a Car Trunk?

It can be placed in the car, but attention must be paid to the method. Here is the relevant information: Method: Ensure the refrigerator is placed upright. Secure it properly to avoid severe shaking during transportation. When moving the refrigerator, note that the body should not tilt more than 45 degrees, as there is a compressor at the bottom inside the back wall of the refrigerator. The bottom of the compressor and the motor casing contain some lubricating oil. Car Refrigerators: There are two types of car refrigerators; one is a semiconductor car refrigerator, which has relatively poor performance and is slower. The other is a compressor car refrigerator, which performs similarly to a household refrigerator but is more expensive.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.