What documents should be prepared before taking the driving test?

1 Answers
LeCarlos
07/29/25 9:16am
To apply for a C1 driver's license, the following materials need to be prepared: Fill out the "Motor Vehicle Driver's License Application Form"; the applicant's original ID card and a copy (photocopied on both sides of A4 paper). Temporary residents also need to prepare the original temporary residence permit and a copy (photocopied on both sides of A4 paper); three one-inch bareheaded color photos with a white background; a physical examination certificate is required. The passing standards for the C1 driver's license test are as follows: Traffic regulations and related knowledge (Subject 1) written test, with a full score of 100, 90 or above is considered passing (including 90). Field driving (Subject 2) on-site, actual vehicle. It is only divided into pass or fail. There are 9 compulsory test items (all without poles), including reversing into a garage, narrow road U-turn, parallel parking, hill start, right-angle turn, curve driving, emergency braking, tunnel, and toll booth card collection. All nine compulsory items must be passed to pass the Subject 2 test. Road driving (Subject 3) on the highway or simulated field, actual vehicle. The test is fully monitored by electronic eyes and traffic police, making the road test more fair.
Was this review help?
18
5
Share
More Forum Discussions

What Could Be the Reason for a Car Not Starting?

The reasons why a car may not start include: 1. Fuel supply system issues, such as clogged low-pressure fuel lines, loose pipes causing fuel leaks, air in high-pressure fuel lines, poor technical condition of fuel injectors, or incorrect fuel injection timing angle; 2. Starting system problems, such as power supply failure, poor contact of the electromagnetic switch, poor contact between the starter motor commutator and brushes, or clutch slippage in the starter transmission mechanism; 3. Insufficient cylinder compression pressure, caused by cylinder head gasket damage leading to air leakage, valves not closing tightly resulting in air leakage, or wear of piston cylinder liners causing air leakage; 4. Insufficient air intake due to a clogged air filter element. Solutions for a car not starting include: 1. Jump-starting; 2. Push-starting; 3. Towing to start.
6
5
Share

What colors are available for the MG3?

The MG3 is available in the following colors: Tudor Yellow, Obsidian Black, Manchester Red, Thames Blue, Fog Gray, Champagne Gold, Scottish Silver, and Summit White. Taking the 2017 MG3 as an example, it belongs to the small car category with body dimensions of: length 4055mm, width 1729mm, height 1521mm, a wheelbase of 2520mm, a fuel tank capacity of 45 liters, and a curb weight of 1130kg. The 2017 MG3 features a MacPherson strut front suspension and a variable cross-section torsion beam rear suspension. It is equipped with a 1.3L naturally aspirated engine producing a maximum horsepower of 102PS, maximum power of 75kW, and maximum torque of 121Nm, paired with a 5-speed manual transmission.
6
5
Share

Does the position light turn on when the low beam is on?

When the low beam is on, the position light is also illuminated. In most current vehicle models, the first position is for the position light, and the second position is for the low beam. When turning on the low beam, it is necessary to first activate the position light. Situations that require turning on the position light include: 1. Temporarily stopping by the roadside at night, the position light should be on; 2. On roads with bright streetlights, the position light can serve as the driving light without turning on the headlights; 3. During rain, snow, fog, nighttime, or other conditions with poor visibility, the position light should be turned on to alert passing vehicles. The position light indicates the presence of the vehicle and its approximate width, making it easier for other vehicles to judge during encounters or overtaking.
15
5
Share

How to Handle a Driver's License with Over 12 Points Deducted?

The handling of a driver's license with over 12 points deducted varies depending on the situation: If the points on a probationary license exceed 12 during the probation period, the license will be revoked, and the individual must re-learn and re-take the driving test. If the points exceed 12 after the probation period, the individual must undergo 7 days of study and training, followed by a retake of the theoretical test (Subject 1). A driver's license is a legal document issued by the administrative authorities, certifying that the holder has learned and mastered traffic regulations and driving skills and has passed the required tests, thereby permitting them to drive a certain type of motor vehicle. The age requirements for obtaining a driver's license are: 1. For small cars, small automatic transmission cars, or light motorcycles, applicants must be between 18 and 70 years old; 2. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, applicants must be between 18 and 60 years old.
5
0
Share

How to Turn Off the Anti-Slip System Light?

The methods to eliminate the anti-slip system light are: 1. Accidentally pressing the ESP off button; 2. Loose or faulty sensor connectors; 3. Short circuit or related fuse blown; 4. Software issues causing poor signal transmission; 5. ABS pump failure. The ways to cancel the anti-slip system light are: 1. Restart the engine and briefly press the ESP off button on the vehicle to check if the ESP was accidentally turned off; 2. Visit a 4S shop for inspection, use a specialized fault diagnostic tool to locate the issue, and after repair, use a decoder to clear the fault code to ensure the ESP works normally, then the fault light will turn off.
9
3
Share

What are the components and functions of the transmission system?

Components of the transmission system: 1. Transmission mechanism: includes manual transmission and automatic transmission; 2. Differential: a tool to solve the problem of different rotational speeds on the left and right sides; 3. Drive shaft: the mechanism that transmits the power from the transmission system to the differential, thereby generating driving force; 4. Engine configuration: includes front-engine front-wheel drive, front-engine rear-wheel drive, and mid-engine rear-wheel drive. The function of the transmission system is to transmit the power generated by the engine to the driving wheels of the car, producing driving force that enables the car to move at a certain speed. The transmission system is categorized by layout into: front-engine rear-wheel drive, rear-engine rear-wheel drive, front-engine front-wheel drive, and all-wheel drive.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.