What documents must a 4S store provide when picking up the car?

1 Answers
VanHarrison
07/29/25 8:32pm
When picking up the car, the 4S store must provide the following documents: 1. Purchase invoice: The car purchase invoice contains a lot of information. After receiving the invoice, you need to check the information. If there are errors, a new invoice must be issued, otherwise the vehicle cannot be registered; 2. Certificate of conformity: The vehicle must have a certificate of conformity to meet the national requirements for motor vehicle equipment quality and related standards, and it is also a necessary document for vehicle registration; 3. Vehicle manual: It provides detailed instructions on how to use the car and other details, which are useful for daily driving; 4. Vehicle conformity certificate: Check the displacement, manufacturing date, chassis number, engine number, and other details on the nameplate. The numbers on the certificate of conformity must match the engine number and chassis number on the vehicle; 5. Original insurance policy, insurance invoice, etc.: If the owner purchased car insurance at the 4S store, the store must also provide the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory traffic insurance label when delivering the car.
Was this review help?
13
5
Share
More Forum Discussions

What to Do If the Exhaust Pipe Falls Off?

It needs to be replaced immediately; otherwise, it will affect the normal operation of the vehicle. Below is relevant information about the exhaust pipe: 1. Introduction: The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. The exhaust pipe is mainly used in light vehicles, micro vehicles, buses, and motorcycles. Its structure consists of a double-layer corrugated pipe covered with a steel wire mesh sleeve, with clamping rings on both straight sections. To enhance noise reduction, an expansion joint or mesh sleeve can be installed inside the corrugated pipe. The main material of the exhaust pipe is stainless steel, while the clamps and connectors can be made of stainless steel or aluminized steel. 2. Function: The car exhaust pipe plays a crucial role in reducing vibration and noise, as well as extending the lifespan of the exhaust muffler system. The primary material of the exhaust pipe is stainless steel. For most vehicles, the exhaust gases leaving the engine are under high pressure, producing noise that can be overwhelming. The main function of the exhaust pipe is to reduce this noise, as it contains a muffler inside, significantly lowering the vehicle's noise levels.
1
3
Share

Is an application required for vehicle headlight modifications?

No. The installation of exterior accessories must ensure they do not harm pedestrians during use and do not exceed a certain proportion of the vehicle's dimensions. Replacing the front bumper is permissible, but modifications such as adding exterior components (e.g., spoilers), raising the chassis to enhance off-road performance are not allowed. Tire modifications: Only original factory tires and rims can be changed; installing sports car tires or significantly larger and wider tires that are clearly unsuitable for the vehicle body is prohibited. Lighting modifications: All parameters of the lighting should strictly comply with relevant national regulations. Adding LED lights or xenon lamp modifications are not permitted. Xenon lamps have an illuminance approximately twice that of sunlight, causing drivers to reflexively close their eyes at night, which could potentially lead to tragic accidents.
20
5
Share

What Does the Yellow Exclamation Light in a Vehicle Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, mainly indicating a brake system fault or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. Wiper Fault Indicator: This fan-like indicator light means there is a fault in the wiper system. Check if there is an issue with the wipers. In addition, during daily use of the vehicle, the warning lights displayed on the dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable risks to the vehicle and personal safety. Note that when the car is started, all lights will turn on for an automatic system check. They will turn off after the check is completed. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of safety hazards.
16
2
Share

What to Do When Car Air Conditioning Has Poor Cooling Effect?

Solutions for poor cooling effect of car air conditioning: 1. Adjust the air vents to face diagonally upward, utilizing the principle that hot air rises and cold air sinks. As the cold air descends, it can rapidly cool down the car interior. Also, avoid placing decorations in front of the air vents as they may obstruct airflow and reduce cooling efficiency; 2. Clean or replace the air filter or condenser. Functions of car air conditioning system: 1. Regulate the interior temperature to provide a comfortable environment for passengers; 2. Draw in fresh air for ventilation; 3. Remove humidity from the cabin to facilitate air circulation between inside and outside the vehicle; 4. Filter dust and impurities from the air to purify the cabin environment.
19
5
Share

What to Do When the Car Brake Pedal Won't Depress?

A faulty brake light bulb or brake light switch may be the cause. If the issue lies with the brake pedal or the brake booster system, then the brake pedal or brake booster pump will need to be replaced. Below is relevant information about the braking system: 1. Introduction: The braking system consists of a control system, hydraulic system, and booster system. 2. Working Principle: The principle of the braking system is to create significant friction, converting the vehicle's kinetic energy into thermal energy. As is well known, energy cannot be created or destroyed; it can only be transformed from one form to another or transferred from one object to another, with the total amount of energy remaining constant. During acceleration, a car converts chemical energy into thermal and kinetic energy, and when braking, the braking system converts the car's kinetic energy into thermal energy, which is then dissipated into the air.
9
0
Share

Where is the cabin air filter located in Changan Oushang?

The cabin air filter in Changan Oushang is located inside the glove compartment in front of the front passenger seat. To replace it, the glove compartment needs to be removed. Taking the Changan Oushang X7 as an example, it is positioned as a compact SUV with body dimensions of 4705mm in length, 1860mm in width, and 1720mm in height, and a wheelbase of 2780mm. It features front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension. The Changan Oushang X7 is equipped with a 1.5T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 131kW and a maximum torque of 265Nm. Additionally, the engine incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.