What documents are required to handle traffic violations for a company vehicle?

What is the matching between C1 gear and speed?

C1 gear and speed matching refers to the manual gear shifting required while driving a manual transmission vehicle. Below are the relevant details: 1. Gear usage: First gear is used for normal starting or climbing very steep slopes. Second gear serves as a transition gear for acceleration after starting or for low-speed driving. Third gear is used when the speed is between 20-40 km/h, commonly used in urban driving. Fourth gear is used when the speed is between 40-60 km/h. Fifth gear can be used when the speed reaches 60 km/h. 2. Permissible speed ranges for gears: The permissible range for first gear is 0 to 20 km/h, with the shift to second gear recommended at 15 to 20 km/h. The permissible range for second gear is 10 to 30 km/h, with the shift to third gear recommended at 25 to 30 km/h. The permissible range for third gear is 20 to 40 km/h, with the shift to fourth gear recommended at 35 to 40 km/h. Note that during exams, the speed in third gear must not exceed 40 km/h. The permissible range for fourth gear is 30 to 50 km/h, with the shift to fifth gear recommended at 45 to 50 km/h.

4

0

Share

What is the Principle of Traffic Light Violation Photography?

The principle of traffic light violation photography is: Generally, electronic eyes use induction lines to sense the pressure from vehicles on the road. The signal is collected by sensors and sent to the central processor, then temporarily stored in a register (this data is valid within one red light cycle). If two pulse signals are generated within the same time interval (during the red light cycle), it is considered "valid," meaning the vehicle has run a red light and is photographed. If the front wheels cross the line during a red light but the rear wheels have not yet crossed, only one pulse is generated. Without two consecutive pulses, the vehicle will not be photographed. Below is additional information: Methods of photographing red light violations: Generally, at traffic intersections, there are two methods for photographing red light violations. One involves underground induction coils with digital cameras mounted on crossbars to capture red light violations, while the other uses cameras to record speeding, red light running, illegal parking, etc., in real time. Regardless of the method, at least three images are captured of the violating vehicle: one instantaneous violation image, one license plate recognition image, and one panoramic image. Both methods operate 24 hours a day, and the images are typically retained for one week.

19

4

Share

How many points are deducted for making an illegal U-turn at an intersection?

If you make a turn at an intersection and end up driving in the wrong direction, and are caught by cameras or police, you will be fined 200 yuan and have 3 points deducted from your license. According to Article 3, Point 9 of the 'Scoring Standards for Road Traffic Safety Violations': If a motor vehicle driver fails to overtake or yield as required, or drives in the opposite direction, 3 points will be deducted for each violation. Driving in the opposite direction refers to the following situations: 1. On roads with solid dividing lines, if a motor vehicle enters the opposite lane. Among these, roads with double solid lines or single solid lines must never be crossed under any circumstances. 2. On roads with dashed dividing lines, overtaking by borrowing the opposite lane is allowed if it can be done safely. However, if an accident occurs, the vehicle that borrowed the lane will be considered as driving in the opposite direction. 3. On roads marked as one-way, any motor vehicle entering in the wrong direction will be considered as driving in the opposite direction. Driving in the opposite direction is a serious subjective traffic violation. In minor cases, it can cause traffic congestion and reduce road capacity; in severe cases, it can lead to major accidents, even fatal crashes resulting in vehicle destruction and loss of life.

20

5

Share

What are the interior buttons and their descriptions for the 2011 Hyundai Elantra?

Modern Elantra interior button descriptions are as follows: 1. Central Control Buttons: 1.1 Electronic Stability Program (ESP): Can be manually turned off in conditions like rain, snow, or muddy roads. Generally, keeping it on during normal driving helps prevent skidding or tailspin. 1.2 Auto Hold: At traffic lights, the vehicle won't roll away even after releasing the brake pedal. Pressing the accelerator again will resume driving. 1.3 Auto Start-Stop: When activated, the engine temporarily shuts off. It restarts once the foot leaves the brake pedal. 1.4 Internal/External Air Circulation: Internal circulation heats or cools the air inside the car and recirculates it, while external circulation brings in outside air. Use internal circulation in congested areas or poor air quality. On highways, switch to external circulation every hour or so to refresh the air and prevent oxygen deprivation. 2. Door Buttons: On the driver's door of the Hyundai Elantra: 2.1 Window Lock Button. 2.2 One-touch Window Control Switch. 2.3 External Rearview Mirror Adjustment Switch.

17

0

Share

How to Deal with Fog on the Outside of the Windshield When Using Air Conditioning in Summer?

To address fog on the outside of the windshield when using air conditioning in summer, you can increase the cabin temperature, apply anti-fog spray, or open the windows for air circulation. Here are the details: Increase the cabin temperature: When using the air conditioning in summer, you can slightly raise the cabin temperature to reduce the temperature difference between the inside and outside of the vehicle. This prevents water vapor from condensing, thus avoiding fog on the windshield. If fog has already formed, you can first use the windshield wipers to clear it, then direct a small amount of warm air toward the windshield to disperse the fog. If your car has a sunroof, slightly opening it can also help. Apply anti-fog spray to prevent fogging: Fogging on the windshield when using air conditioning is caused by the temperature difference between the inside and outside of the glass. A simple preventive measure is to spray a small amount of anti-fog solution onto the windshield and wipe it clean. This removes dirt and stains while forming a thin, transparent protective film on the glass, effectively preventing water vapor from condensing and forming fog. Open the windows for air circulation: If the fog is not severe, you can slightly open the side windows to allow air to circulate. This helps balance the temperature inside and outside the car, gradually dispersing the fog. This method achieves a cooling effect without increasing fuel consumption, but it is not suitable for rainy or overcast days.

12

5

Share

What are the causes of Porsche chassis system failure?

Air compressor (air pump) and related circuit failures; valve block and related circuit failures; system leaks (such as air springs, related pipe connections); control unit failures. It is recommended to promptly inspect and repair at a 4S shop. The automotive chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. The function of the chassis is to support and install the car engine and its various components and assemblies, form the overall shape of the car, receive the power of the engine, make the car move, and ensure normal driving. The following is more related information: Common situations of chassis system failure: 1. The dashboard displays chassis system failure. First, remove the key, and then restart the car. At this time, if the dashboard does not display a fault, in most cases, there is no problem. It is best to test whether the chassis lifting is normal on the spot. If it still displays, it means there is a problem. Possible causes: air compressor (air pump) and related circuit failures; valve block and related circuit failures; system leaks (such as air springs, related pipe connections); control unit failures. 3. The dashboard does not display chassis failure. When operating the chassis lifting, it is found that the body cannot reach the predetermined height, and occasionally it can reach it but takes a long time to lift. This situation is mostly due to the compressor only working for a short time and then stopping during chassis lifting, and the compressor needs to be replaced.

1

0

Share

What documents are required to handle traffic violations for a company vehicle?

What is the matching between C1 gear and speed?

What is the Principle of Traffic Light Violation Photography?

How many points are deducted for making an illegal U-turn at an intersection?

What are the interior buttons and their descriptions for the 2011 Hyundai Elantra?

How to Deal with Fog on the Outside of the Windshield When Using Air Conditioning in Summer?

What are the causes of Porsche chassis system failure?

What are the new annual inspection regulations for Wuling Hongguang S?

What are the requirements for driver's license photos?

What is the fuel consumption of the Buick Excelle automatic transmission?

The Meaning of 4S in 4S Stores