···
Log in / Register

What documents are required to handle traffic violations at the traffic police station?

1 Answers
VanChristopher
07/24/25 6:19pm

To handle traffic violations and demerit points at the traffic police station, the required documents include: the original or a copy of the vehicle registration certificate, the original ID card of the vehicle driver, and the original driver's license of the vehicle driver. Currently, besides handling violations in person at the traffic police station, you can also process them online. Process for handling violations at the traffic police station: After gathering all the necessary documents, the driver handling the violations should go to the violation processing window at the traffic police station. You can choose to process all violations or select specific ones to handle, and you may also raise objections to the violations and apply for administrative reconsideration. If there are no objections to the violations, after completing the demerit point deduction on the driver's license, you will receive a violation processing notice and a fine ticket. You can take the fine ticket to the designated bank to pay the fine or pay it online via internet banking. Keep the receipt after paying the fine. If the violation still exists, you will need to take the receipt to the traffic police department to manually clear the violation. Online processing method: Online processing is currently limited to handling demerit points (6 points or less) and fines. After logging into the Traffic Management 12123 App, click on [Violation Processing] to enter the list of unprocessed violations. Select and click on [Process and Pay]; proceed to the pending processing and payment confirmation page, choose the payment method, and click [Confirm Payment] to enter the payment direction selection page. Select the appropriate payment method, complete the payment, and the process is finished.

Was this review help?
13
2
Share
More Forum Discussions

What are the reasons why the car always has no power and cannot start?

Under normal circumstances, a vehicle can be parked for up to one week. If the car frequently has no power and cannot start, the primary task is to check whether there is an issue with the battery quality or if its performance has degraded, necessitating the replacement of a new battery. Secondly, the vehicle may have an electrical leak, requiring the identification of the leaking component and checking if additional electrical devices have been installed. Methods for maintaining a car battery: 1. Avoid long-term parking in open parking lots: If parking for an extended period, the battery should be removed and taken away to prevent freezing damage. 2. Pay attention to the starting time: The car engine is harder to start in winter. Each attempt to start the car should not exceed 5 seconds, with a minimum interval of 15 seconds between attempts. If the car still does not start after several attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid multiple uninterrupted attempts to start, as this can cause the battery to over-discharge and burn out. 3. Regularly charge the car battery: A battery left unused for a long time will gradually self-discharge until it becomes unusable. Therefore, the car should be started periodically to charge the battery. 4. Clean the terminals regularly: The battery terminals should be cleaned periodically and coated with special grease to protect the wiring harness. Regularly inspect the battery accessories and connecting lines. 5. Avoid using car electrical appliances after the engine is turned off: Using the battery alone when the engine is not generating power can cause damage to it.
20
1
Share

How to Park on a Slope Without Rolling Back?

When parking on a slope, pay attention to the coordination of the throttle, clutch, and handbrake: engage first gear and slowly release the clutch while lightly pressing the throttle pedal. When the car's clutch reaches the semi-engaged state, quickly release the handbrake, then gently press the throttle pedal while releasing the clutch pedal. Below is additional information about electronic parking brakes: 1. Electronic Brake: This refers to a technology that integrates the temporary braking function during driving with the long-term parking brake function, achieved through electronic control. 2. Electronic Parking Brake: This technology uses electronic control to achieve parking braking. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button.
20
5
Share

What are the functions of couplings and clutches? What are the differences between them?

Here is the relevant introduction about the functions and differences between couplings and clutches: 1. Function of couplings: Used to connect two shafts together. During machine operation, the two shafts cannot be separated. Only when the machine is stopped and the connection is disassembled can the two shafts be separated. 2. Function of clutches: Used to connect two shafts together, allowing the two shafts to be separated or engaged during machine operation. 3. Differences: Couplings connect two half-shafts together to enable effective power transmission. They cannot be disengaged during operation. Clutches are a special method of power transmission, requiring the ability to disengage or engage at any time during operation, hence the name clutch. Couplings only have the function of connecting and transmitting power, while clutches not only have the function of connecting and transmitting power but also the functions of deceleration and reversing.
9
1
Share

What Causes the Timing Chain Stretching Failure in the Enclave?

The reasons for timing chain stretching causing failure in the Enclave: Wear on the sprockets and chain rollers leads to geometric dimension changes, resulting in timing errors, and the engine malfunction indicator light will illuminate. Function of the Timing Chain: The primary significance of the timing chain lies in transmitting power from the crankshaft to drive the engine's valve train, ensuring that the engine's pistons can properly complete the four strokes of intake, combustion, power, and exhaust, thereby maintaining normal engine operation. Structure of the Timing Chain: The entire system consists of components such as gears, chains, and tensioning devices. Among them, the hydraulic tensioner can automatically adjust the tension force, keeping the chain tension consistent. This not only enhances safety and reliability but also significantly reduces the engine's usage and maintenance costs, achieving multiple benefits with a single solution.
16
1
Share

How to connect the car ACC wire?

If there are only positive and negative two wires, then connect the negative to the negative terminal of the battery or to a screw on the car body. The following is a related introduction about ACC adaptive cruise: 1. Definition: The full English name of ACC is "Adaptive Cruise Control", which means "adaptive cruise control" in Chinese. The adaptive cruise control system is an intelligent automatic control system, which is developed on the basis of the already existing cruise control technology. 2. Function introduction: The adaptive cruise control system is an intelligent automatic control system, developed on the basis of the already existing cruise control technology. During vehicle driving, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while the wheel speed sensor collects the vehicle speed signal. When the distance to the vehicle ahead is too small, the ACC control unit can coordinate with the anti-lock braking system and the engine control system to apply appropriate braking to the wheels and reduce the engine's output power, ensuring that the vehicle always maintains a safe distance from the vehicle ahead.
9
2
Share

Where is the hazard light switch located on an old Wuling minivan?

The hazard light switch on an old Wuling minivan is located on the left lever beneath the steering wheel. Below is relevant information about minivans: 1. Introduction: According to the "Classification of Motor Vehicle Structure Terminology," a minivan is defined as having a flat or short-nose body structure, single-layer flooring, mid-engine placement (referring to the engine block being entirely positioned between the front and rear axles), a width-to-height ratio (the ratio of the vehicle's width to its height) of less than or equal to 0.90, seating capacity of up to 9 people, and being a passenger vehicle equipped with seats. 2. Advantages: Minivans are affordable, come in various types, and are economical and practical, making them widely applicable in many industries. In modern society, as an important member of the automotive family, minivans are sure to be promoted and popularized throughout society.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.