What documents are required for vehicle pickup?

1 Answers
DelCollin
07/25/25 6:24am
Vehicle pickup requires the vehicle registration certificate and ID card. Precautions for vehicle pickup are as follows: 1. Pay attention to the inspection of the vehicle's paint surface: When picking up the car, conduct a detailed inspection of the entire vehicle's paint surface. After the vehicle leaves the factory, during transportation and until the final sales process, the paint surface is most susceptible to damage. If the relevant staff is slightly careless, it may cause collisions or scratches to the paint. Park the vehicle in a well-lit environment for inspection, carefully observe whether the color and smoothness of the paint are uniform. Any repainted areas will inevitably leave traces to some extent. 2. Pay attention to checking whether the vehicle's seams are uniform: If the vehicle's body panels have been replaced or bodywork has been done, it is difficult to ensure the uniformity of the body seams. If the gaps between the seams are inconsistent or the transitions are not smooth and natural, it is likely to be an accident vehicle.
Was this review help?
8
2
Share
More Forum Discussions

Comparison between Elysion and Buick GL8

The differences between Elysion and Buick GL8 are as follows: Different classes: Elysion is a medium-sized MPV, while Buick GL8 is a large-sized MPV, so these two vehicles belong to different classes. Different power: Elysion is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 146Ps, maximum power of 107kW, maximum torque of 175Nm, paired with an E-CVT continuously variable transmission, and also comes with an electric motor, with a maximum horsepower of 184Ps and maximum power of 135kW; Buick GL8 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 237Ps, maximum power of 174kW, maximum torque of 350Nm, paired with a 9-speed automatic transmission. In terms of power output, the top-end version of Elysion is more powerful than the top-end version of Buick GL8.
15
0
Share

How Many Years Can Michelin Tires Be Used?

Michelin tires can last for about 3 years, covering approximately 50,000 kilometers. Here are the factors that affect tire lifespan: 1. Working Pressure: Both underinflation and overinflation can impact tire lifespan. If the tire pressure is too low, radial deformation increases, causing excessive deformation on both sides of the tire wall, leading to shoulder wear on the tread. This raises the tire temperature and significantly shortens its lifespan. 2. Climate Conditions: The local climate in different regions affects the aging rate of tire rubber. Aged tires lose their elasticity, and continued use can result in tread deformation, increasing the risk of blowouts and reducing braking effectiveness. 3. Tire Temperature: During driving, tires heat up due to stretching, compression, and friction. Excessive temperatures can accelerate tire wear and even cause blowouts.
14
4
Share

How to reset the maintenance light on Zotye T500?

Zotye T500 maintenance light reset method: 1. Turn off the ignition switch. 2. Press and hold the two mileage reset buttons on the instrument panel without releasing. 3. Turn the ignition switch to the position where all instruments are lit, wait until the wrench light goes out, then release the two mileage reset buttons. 4. Turn off the ignition switch and then turn it on again, the maintenance light will be reset. Here is more information about car maintenance: 1. When the maintenance light comes on, it means the car needs to be serviced at a professional auto repair facility. A car maintenance service can take as little as 40 minutes or as long as two to three hours, depending on the number of maintenance items required. 2. Cars are consumables and require regular maintenance to improve performance and extend their lifespan. According to relevant car maintenance test programs, proper car maintenance can save 11.36% of fuel during driving; in addition, after a full vehicle maintenance, CO emissions during idle driving are reduced by 45.37%.
17
2
Share

What are the effects of water ingress in the BYD S7 cabin carpet?

If the carpet is severely soaked and not properly handled, it will develop a musty odor, affecting driving comfort; the bottom sponge and floor covering will remain damp. Over time, the floor covering and sponge may rot, shortening their service life; accumulated water in the carpet can breed a large number of bacteria, which will fill the cabin air, posing health risks with prolonged inhalation; components under the car may rust, and parts beneath the carpet are not easily detectable. Once rust occurs, if not addressed promptly, it can spread to other areas over time. Here are the treatment methods: Ventilation: If the water ingress is not too severe, remove the floor mats, turn on the air conditioning, set the car to internal circulation, open the doors for ventilation, and use natural airflow to accelerate moisture evaporation, which should speed up the process. Drying and disinfection: After cleaning and drying the carpet, it is best to disinfect the car with specialized disinfectant or alcohol to avoid bacterial hazards. If there is still some lingering odor after treatment, you can spray deodorant in the car or place fruits like oranges or pineapples to gradually eliminate the odor with their fresh fragrance.
13
2
Share

What does an OBD fault in a car mean?

OBD stands for On-Board Diagnostics, a system that continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment. It will immediately issue a warning if it detects any situation that may cause excessive emissions. Below is an introduction to the OBD system: 1. Full name of OBD: On-Board Diagnostics, which translates to Chinese as a detection system extended for automotive fault diagnosis. "OBDⅡ" is the abbreviation for "On-Board DiagnosticsⅡ", meaning Type II On-Board Diagnostics system. 2. To standardize the diagnosis of emissions and drivability-related faults, starting from 1996, all new cars sold in the U.S. must have similar diagnostic tools, fault codes, and repair procedures, i.e., comply with the OBDⅡ program regulations. 3. With the increasing globalization of the economy and the internationalization of automobiles, the OBDⅡ system, as the foundation for drivability and emissions diagnosis, will be implemented and applied more widely. The OBDⅡ program makes automotive fault diagnosis simple and uniform, eliminating the need for maintenance personnel to learn each manufacturer's new system separately.
20
3
Share

Can the AUTO headlight setting be kept on for a long time?

The headlights can be kept on AUTO mode continuously, with the following details: 1. It's safe to keep the headlights on AUTO mode for extended periods, as AUTO mode does not control high/low beam switching. Automatic headlights only rely on sunlight sensors to determine ambient brightness and cannot analyze real-time changes in surrounding conditions to select between high and low beams. 2. If you want automatic headlights to control high beams, you need to push the combination light switch forward to the high beam position, then turn the knob to AUTO position, which will enable automatic high beam activation. Additional information: 1. When driving, the headlights will automatically turn on when ambient light becomes dim and turn off when it brightens. 2. Automatic headlights have a delay in activation - it takes about ten seconds after the light sensor detects darkness for the headlights to turn on automatically. According to traffic regulations, headlights must be turned on before entering tunnels, so manual activation is still required when approaching tunnels.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.