What documents are required for vehicle inspection now?

2 Answers
DylanDella
07/24/25 8:27pm
Documents required for vehicle inspection include the original ID card; original vehicle license; duplicate of compulsory traffic insurance; and vehicle and vessel tax certificate. Below is additional information: Introduction: Annual inspection is a mandatory project for vehicles every year or every two years. Additionally, do not forget the triangular warning sign and fire extinguisher, as these items will be checked during the appearance inspection. Specific process: Prepare the aforementioned materials, then drive the vehicle to a nearby inspection station. Upon arrival, first go to the payment window to pay fees and collect the application form, then wait for the online inspection. After the inspector verifies the vehicle's appearance and engine number, the vehicle will be driven online for an exhaust emission test. If it passes, proceed to the payment window to pay fees and collect the passing mark; if it fails, the vehicle must be taken to a repair shop for maintenance before returning to the inspection station for re-inspection.
Was this review help?
15
1
Share
StPeyton
08/11/25 11:09am
I'm an experienced driver and have been through many vehicle inspections. The must-bring items are the original and photocopy of the vehicle owner's ID card, the vehicle registration booklet, and the compulsory traffic insurance policy (make sure it's valid). Don't forget to bring some change or have mobile payment ready for the inspection fee - some testing stations only accept cash. Last time I saw someone who didn't bring photocopies and wasted time, so I always prepare two copies in advance. Also, wash your car thoroughly and ensure all lights are working to avoid last-minute minor repairs. I recommend going early in the morning to avoid peak hours when it's less crowded and faster. Getting these small details right ensures a smooth one-time pass without hassle.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What Causes Water Leakage from a Car Chassis?

Water leakage from a car chassis can be caused by: 1. Most car undersides do not have water-draining hoses, so condensation from the air conditioning is directly discharged from the chassis; 2. Scraping the chassis may damage the windshield washer fluid pipe, causing leaks. Inspection and troubleshooting methods: 1. Check if the coolant in the radiator is low, inspect the cooling system pipes for looseness or damage, and check the bottom of the radiator for scratches from grounding; 2. Ensure the coolant reservoir is not overfilled (overflow may occur when the temperature rises); 3. Inspect the windshield washer fluid reservoir and pipes, as well as the connections, for looseness or damage; 4. Determine if the dripping is due to prolonged use of the air conditioning in hot weather, causing condensation discharge (this is a normal phenomenon).
20
1
Share

Can a car without a display have Bluetooth?

If there is no central control screen, nor buttons with Bluetooth symbols or answer keys, it indicates that the car does not have Bluetooth functionality. If there is no display but one of the three symbols—Bluetooth logo, BlueTooth, or BT—on the central control panel buttons, it means the car has Bluetooth. Press the button once to activate the in-car Bluetooth. If there are no buttons, check the multifunction steering wheel for an answer key. Pressing this button twice will activate Bluetooth if available, and the speaker will emit a prompt tone. Below are details about in-car Bluetooth: Functions of in-car Bluetooth: The primary function of in-car Bluetooth is to automatically recognize mobile phones, enabling connection without cables or phone holders. Drivers can control their phones without touching them, keeping both hands on the steering wheel, and use voice commands to answer or make calls. Calls can be conducted through the car's audio system. In-car Bluetooth also allows playing music from the phone on the car's Bluetooth device. Using in-car Bluetooth enables hands-free operation while driving, reducing the risk of traffic accidents. How to connect Bluetooth without a display: To establish a pairing relationship between the phone and the in-car Bluetooth device, first enable the Bluetooth functions on both devices. Set the phone's Bluetooth to "Visible to All" or allow it to be detected or searched. Search for Bluetooth devices on the phone, select the in-car Bluetooth device once found, and pair them using the password 0000 (some devices may use 1234). Once paired, the connection is successful.
7
4
Share

What is the reason why the trunk of Golf 6 cannot be opened?

The reason why the trunk of Golf 6 cannot be opened is that if the car's remote key can remotely lock or unlock the doors, this proves that the battery is not a problem, then you need to check whether the remote key button is damaged or there is a problem with the trunk's wiring. The basic components of the remote key are as follows: 1. Transmitter: It consists of a transmission switch, transmission antenna, integrated circuit, etc., containing an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery installed on the opposite side of the circuit. The transmission frequency uses radio waves, and the transmission switch button sends a signal once each time it is pressed; 2. Receiver: After the transmitter uses short-wave modulation to send the identification code, it is received by the car's short-wave antenna, and enters the short-wave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, and is compared with the demodulator's identification code.
5
3
Share

What is the fuel consumption of the Golf 8?

Golf 8 fuel consumption is 5.1L/100KM. There are three methods to reduce vehicle fuel consumption: 1. Minimize vehicle weight: Keep the interior simple and avoid carrying unnecessary items, as every additional kilogram increases fuel consumption by 1%; 2. Avoid excessive vehicle modifications: Adding spoilers, protective covers, or wings can disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems increases electrical load, leading to unnecessary fuel consumption; 3. Develop good driving habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.
20
0
Share

How many points are deducted for running a red light on the highway?

Running a red light is a violation of traffic regulations and will result in point deductions. Driving a motor vehicle in violation of traffic signal regulations will result in a deduction of 6 points. Point deduction standards for running a red light: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal regulations will result in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a deduction of 3 points. Common ways to check for red light violations include the following: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Handling" option. Under "Violation Handling," you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. Visit the office halls of the traffic police departments in various cities and districts to check using touch query terminals. Log in to the external service websites of the Public Security Traffic Management Bureau of each city: Find the "Vehicle Violation Query" section, enter your license plate number and vehicle engine number, then click "Query."
7
1
Share

Where is the tow hook on the Ford Explorer?

Ford Explorer's tow hook is located at the front bumper position. Here are the relevant details about the Ford Explorer: 1. Power configuration: The new Ford Explorer is equipped with a 2.3T EcoBoost engine, with a maximum power of 203 kW and a peak torque of 425 N·m, achieving a 0-100 km/h acceleration time as low as 7.6 seconds. The sixth-generation Ford Explorer, featuring a longitudinal rear-wheel-drive layout, has a more balanced front and rear axle load distribution, with a static weight distribution of 50:50, enhancing the vehicle's dynamic balance. 2. Body dimensions: 5075*2004*1778 mm, with a wheelbase of 3025 mm. The vehicle's golden ratio dimensions—over 5 meters in length, over 2 meters in width, and nearly 1.8 meters in height—along with a floating roof design inspired by luxury yachts and a 3025 mm long wheelbase, create a nearly 6-square-meter cabin space, delivering a more spacious KINGSIZE starlight cabin.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.