What documents are required for vehicle inspection in Tianjin?

2 Answers
MacGabriella
07/28/25 9:59pm
For motor vehicle inspection, the owner's ID card, vehicle registration certificate, and a copy of the valid compulsory traffic insurance are required. Note that a triangular warning sign must be carried in the vehicle. Although fire extinguishers are not mandatory inspection items, it is recommended to have one equipped. Also, ensure that the tire pressure indicator is within the normal green range. If the vehicle is too dirty, you may be asked to wash it. Below is relevant information about vehicle inspection: Implementation of cross-regional vehicle inspection: Within a city, vehicle owners can freely choose an inspection agency for vehicle inspection. Inspection areas or designated inspection agencies should not be divided by urban, suburban, or county boundaries. Cross-regional vehicle inspection is promoted. In provinces (autonomous regions, municipalities) that have implemented a unified provincial inspection supervision platform, vehicles other than large buses and school buses can undergo inspection anywhere within the province without needing to complete any inspection authorization procedures. Accelerate the establishment of a unified inspection supervision platform: By December 31, 2014, all provinces (autonomous regions, municipalities) should complete the promotion. Trial implementation of cross-provincial (autonomous regions, municipalities) vehicle inspection is underway. After the application of a nationally unified inspection supervision software, vehicle owners can directly conduct inspections and obtain inspection qualification marks at the vehicle's location, except for large buses and school buses.
Was this review help?
8
1
Share
Byron
08/12/25 2:33am
Last time I had my car inspected in Tianjin, I gained some experience. Every time I go, I remember to bring the original vehicle license, which is essential to prove the car's identity. Also, don't forget the copy of the compulsory traffic insurance policy, which must be within the validity period, otherwise the inspector will reject it. Additionally, the original ID card of the car owner is necessary. If it's a company car, you also need to bring a copy of the business license. The inspection sites in Tianjin are quite formal. I'm used to preparing these documents and keeping them in the car a day or two in advance to avoid last-minute panic. Car inspection is not just a formality; it can promptly identify issues with brakes and lights, ensuring driving safety. Going in the morning means fewer people. I've brought a water bottle before to avoid getting thirsty during long queues. In short, with all the documents ready, the inspection goes smoothly, and driving feels more secure.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What brand is Nexen tires?

Tire Nexen is the Nexen brand, a South Korean tire brand originally named Wooseong. Nexen tires utilize optimal tread patterns and carcass contour designs to minimize rolling resistance and reduce energy loss in the tread and sidewalls, thereby achieving excellent low fuel consumption performance. Nexen's passenger car tires are currently divided into three main grades: the high-end N series, the mid-range CP series, and the entry-level SB series. Among them, the premium product N1000 has already commenced production at a factory built in Qingdao, with its design orientation focusing on high durability and superior handling traction, primarily catering to higher-end vehicle models. The tire diameter sizes for these products range between 16 inches and 20 inches.
15
4
Share

What is the displacement of the Toyota 86?

The displacement of the Toyota 86 is 2.0 liters, utilizing a naturally aspirated form, with a maximum horsepower of 200 hp, a maximum power of 147 kW, and a maximum torque of 205 Nm. Engines within this displacement range offer a balanced performance in terms of power and fuel economy. The dimensions of the Toyota 86 are 4240mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm. The Toyota 86 primarily features modifications to the concept version's front bumper, headlights, and taillights, with no significant changes to the overall body lines. The body design incorporates sharp angles and blade-shaped fold lines, elements commonly found in TOYOTA sports models.
3
0
Share

How Often Should Car Clutch Plates Be Replaced?

Car clutch plates should generally be replaced every 100,000 kilometers, though the actual replacement interval may vary depending on individual driving habits. The clutch plate is located between the engine and the transmission, serving to transfer the engine's power to the transmission or to cut off the power transmission. Correct ways to use the clutch: 1. When driving, avoid keeping your left foot on the clutch pedal continuously, as this can lead to wear on the release bearing and may cause the clutch plate to slip; 2. When using the half-clutch technique, pay attention to controlling the duration and ensure proper coordination between the clutch and accelerator.
12
0
Share

What does the ECON button mean on a Beijing Hyundai car?

ECON is the abbreviation for the low-carbon and environmentally friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. When Sport mode is activated, the throttle pedal response becomes very sensitive, and the transmission delays shifting. The transmission will only upshift when the engine speed reaches the redline. After switching to Sport mode, the engine speed will remain around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it can achieve reduced fuel consumption and energy savings, but the car's power will weaken. ECON can be understood as the abbreviation for "economy." In most cases, it is recommended to keep ECON mode on. It should only be turned off when high torque output is needed (e.g., climbing a hill) or when the car is traveling at very high speeds. Pressing the ECON button activates the low-carbon and environmentally friendly driving mode. The ECU, engine, and transmission then intelligently execute the driver's intentions in the most fuel-efficient manner, achieving optimal fuel economy through rapid upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although the ECON mode is simple and effective, it cannot operate under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the speed exceeds the economical range (typically between 60-90 km/h), the ECON mode will not save fuel. The key to the ECON mode is the use of computer-controlled independent operation while the car is moving, making it effective. Therefore, it does not work during idle parking or when the car is in N, P, or manual mode. When overcoming significant resistance or requiring high torque output (e.g., climbing a hill), the ECU prioritizes ensuring sufficient power to drive the car, and the ECON mode will not function in such cases.
14
0
Share

What kind of engine oil should be used for Borgward BX5?

Borgward BX5 requires fully synthetic engine oil. The functions of engine oil are: 1. Reducing friction and high temperature; 2. Cooling and temperature reduction; 3. Cleaning; 4. Shock absorption; 5. Rust and corrosion prevention. The Borgward BX5 is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm and a fuel tank capacity of 60 liters. The Borgward BX5 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5500rpm, and a maximum torque of 250Nm between 1750 to 4000rpm.
20
2
Share

What are the symptoms of a damaged charcoal canister solenoid valve?

Symptoms of a damaged charcoal canister solenoid valve include: 1. Abnormal noises during vehicle operation; 2. Strong fuel odor inside the vehicle; 3. Unstable engine idle; 4. Difficulty starting the engine. The charcoal canister solenoid valve is a device installed in cars or motorcycles to reduce air pollution caused by fuel evaporation emissions while improving fuel efficiency. The working principle of the charcoal canister solenoid valve is: when the engine is off, the vehicle's charcoal canister begins absorbing fuel vapors evaporating from the fuel tank, trapping them in the micropores of the activated carbon inside the canister to prevent the vapors from being released into the atmosphere. When the engine starts, the adsorbed fuel vapors in the canister are delivered to the engine as fuel.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.