What documents are required for vehicle inspection in Beijing?

1 Answers
LaJade
07/29/25 1:22pm
When conducting a vehicle inspection in Beijing, the following documents must be presented: 1. Vehicle documents: Original vehicle registration certificate. 2. Personal identification: Original ID card of the person conducting the inspection. 3. Related materials: Original valid insurance policy (for compulsory traffic insurance, only the copy retained by the traffic management department is required). Conditions for qualifying for the 6-year exemption from annual inspection are as follows: 1. Non-commercial vehicles: The vehicle must be non-commercial. 2. Passenger capacity: The vehicle's approved passenger capacity must be 6 or fewer. 3. Vehicle type specified on the registration certificate: Sedan (mini, compact, midsize, full-size), mini ordinary passenger vehicle, mini off-road passenger vehicle, compact ordinary passenger vehicle, compact off-road passenger vehicle, compact special passenger vehicle. 4. Registration date: The registration date must be after September 1, 2010.
Was this review help?
6
1
Share
More Forum Discussions

Do motorcycles need to follow directional markings?

Motorcycles are classified as motor vehicles and must follow directional markings. Motorcycle traffic regulations: Motorcycles must always keep to the right side of the road under any circumstances, as all motor vehicles are required to drive on the right side. Failing to do so would violate fundamental traffic laws. However, this right-side driving rule refers to vehicle direction and lane regulations, not permission to drive arbitrarily in the right lane. Reasons for motorcycles keeping right: Lane guidance: Urban roads typically have multiple lanes, with vehicles in the right lane generally moving at slower speeds. This arrangement enhances motorcycle safety to some extent and avoids disrupting normal traffic flow for other vehicles. Traffic flow management: Without rules, there would be chaos. Random lane usage would cause congestion, while keeping right improves traffic efficiency and strengthens management.
11
3
Share

What Causes Abnormal Engine Ignition Sounds?

Engine ignition sounds abnormal for the following reasons: Belt Slippage: When starting the car, there is a sharp squealing noise. This squealing sound is caused by belt slippage, which may be due to insufficient tension from the tensioner pulley or the belt being stretched from prolonged use, making it too loose. For a normal belt and tensioner pulley, when you twist the belt slightly with your hand, it should not twist more than 90 degrees. If the belt can be twisted over 90 degrees with little effort, it indicates that the belt or tensioner pulley is loose. Gear Grinding: When starting the car, there is a clicking or grinding noise. This sound is caused by the starter gear grinding against the engine flywheel gear. The reason is that after prolonged and frequent use, the gears on both the starter and flywheel wear down significantly, leading to misalignment and grinding sounds.
1
5
Share

Why is the transmission too hot?

The reasons for transmission overheating are as follows: 1. Dual-clutch transmissions become hot due to the continuous engagement and disengagement of clutch plates; 2. CVT transmissions overheat because of slippage in the steel belt or chain; The functions of a transmission are as follows: 1. To change the gear ratio, expanding the range of torque and speed variation in the driving wheels; 2. To adapt to constantly changing driving conditions, allowing the engine to operate under favorable circumstances; 3. To enable the vehicle to reverse while maintaining the same engine rotation direction; 4. To utilize neutral gear to interrupt power transmission, facilitating gear shifting or power output in the transmission.
7
5
Share

Is it acceptable to transfer vehicle ownership directly without signing an agreement?

Selling a car and transferring ownership directly without signing an agreement is possible, but it can be difficult to resolve any issues that may arise with the vehicle. Vehicle ownership transfer procedures: Vehicle license, vehicle registration certificate, vehicle registration supplementary form (obtained from the local vehicle management office in the jurisdiction where the vehicle is registered, with ID card, vehicle license, and road maintenance fee certificate required for retrieval), vehicle purchase tax certificate, ID cards of both buyer and seller, household register. For non-local residents, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year. Precautions when selling a car: Vehicle insurance transfer is another crucial point to consider when selling a car. Compared to vehicle ownership transfer, insurance transfer is often overlooked by car owners. If the vehicle ownership is transferred without transferring the insurance, the owner will not be entitled to any compensation in the event of an accident.
14
1
Share

Why does a motorcycle burn oil at high speed but not at low speed?

Motorcycle burns oil at high speed but not at low speed for the following reasons: Oil quality issues: Using poor quality or viscosity grade non-compliant engine oil. Low-quality engine oil can lead to increased wear, and engine oil with too low or too high viscosity will cause poor engine lubrication, increasing wear on piston rings and cylinder walls, reducing sealing performance, and resulting in oil burning. Excessive clearance: Excessive clearance between piston rings and cylinder walls, improper installation of piston rings, or poor sealing can cause oil on the cylinder walls to enter the combustion chamber, leading to oil burning. Additionally, poor sealing performance of valve seals, damage to the crankcase forced ventilation valve (PCV), or clogged crankcase ventilation ports causing excessive pressure in the crankcase can all result in oil entering the cylinder with crankcase gases and participating in combustion.
3
0
Share

How to Use the Volkswagen Lavida's Tiptronic Transmission?

Volkswagen Lavida's Tiptronic transmission gear usage is as follows: 1. P (Parking Gear): Can only be engaged when the car is stationary; 2. R (Reverse Gear): Can only be engaged when the car is stationary; 3. N (Neutral Gear): The transmission is in neutral (idle gear), with no power transmitted to the wheels and unable to utilize the engine's braking effect; 4. D (Drive Gear): All forward gears can automatically shift up and down, with the shift timing determined by engine load, personal driving style, and driving speed; 5. S (Sport Gear): In sport mode, the transmission can shift freely. While the car is moving, simply push the gear lever into the S position, typically used for climbing slopes and overtaking.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.