What documents are required for vehicle inspection?

Can driving license points be deducted in a different location?

Driving license points can be deducted in a different location. Driving licenses are valid nationwide, meaning any legally issued and valid driving license can be used in any province, city, or area within mainland China. Documents required for point deduction: To deduct points from a driving license, you need to bring the original and duplicate of the vehicle registration certificate of the offending vehicle, the original and duplicate of the driving license, cash or a bank card designated by the traffic police department, and go to the service hall of the traffic management department to handle the procedure. The license holder must be present in person. Personal signature is required, and the license holder must appear in person and present their ID card. Points cannot be replenished: Within one cycle, if the points deducted from the driving license are less than 12, the penalty must be paid in full, and the points will be cleared in the next cycle; if the points deducted reach 12, the driver must attend a seven-day study and examination on road traffic safety laws, regulations, and related knowledge at the place where the motor vehicle driving license was issued within fifteen days.

2

4

Share

What are the characteristics of car series from different countries?

Characteristics of car series from different countries: Asian cars have low cost and small displacement; American cars have large displacement and high horsepower; European cars offer spacious interiors and advanced technology. Asian cars: The design philosophy focuses on 'two small and one large,' meaning minimal fuel consumption, minimal usage costs, and maximum comfort and convenience. They typically feature small-displacement engines with highly advanced fuel-saving technology, low maintenance and repair costs, and very low usage expenses. The material selection is very scientific, excelling in creating a comfortable and cozy atmosphere with numerous storage compartments and comfort-oriented electronic features, emphasizing maximum comfort and convenience. American cars: The most notable features of American cars are their emphasis on comfort and power, along with safety. They boast excellent suspension systems and noise insulation design, with engines that prioritize large displacement and high horsepower, along with very good safety performance. European cars: European cars offer a wide range of options. The European philosophy in car manufacturing emphasizes advanced technology and high safety standards. The designs are rigorous and scientific, with very reliable quality and advanced technology. They adhere to strict manufacturing techniques, component production, and material selection, ensuring excellent technical performance and durability.

7

3

Share

What is the process for license plate registration after picking up the car?

Below is the process for license plate registration after picking up the car: 1. Obtain the vehicle qualification certificate. The vehicle qualification certificate is very important as the vehicle must be registered. Currently, some car 4S stores delay providing the vehicle qualification certificate, which can postpone the registration process. Therefore, it is necessary to obtain the vehicle qualification certificate as soon as possible by communicating more with the 4S store and being firm in your approach; otherwise, the 4S store may delay providing it for several days. 2. Keep the triplicate car purchase invoice. After purchasing the car, the 4S store will issue a triplicate car purchase invoice, which must be kept properly as it will be used in subsequent registration processes. The invoice consists of red, yellow, and blue copies, with the red and yellow copies usually submitted and the yellow copy retained by the buyer. 3. Pay the vehicle purchase tax and obtain the original and duplicate tax certificates. After purchasing the vehicle, it is necessary to pay the vehicle purchase tax as soon as possible, usually at the nearest vehicle management office. After successfully paying the vehicle purchase tax, the original and duplicate tax certificates will be issued, which should be kept safely. 4. Prepare various documents in advance. Prepare the original ID card and copies (make several copies for backup). Non-local residents need to provide the original and copies of the temporary residence permit. 5. Choose the vehicle license plate number. Once all procedures are complete, you can go to the vehicle management office to register and apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, vehicle appearance, and the vehicle's warning triangle plate, which should be prepared in advance. 6. Pay the fee and wait to receive the license plate. After the vehicle inspection, you can go to the vehicle management office hall to select a license plate number. Generally, there are two options: self-selection or random selection, and you can choose either method.

8

2

Share

What are the common issues causing uneven wear on rear tires?

Uneven wear on rear tires is generally caused by abnormal tire pressure, tire dynamic imbalance issues, wheel alignment problems, or suspension issues. Abnormal tire pressure: Either there's excessive difference in pressure among the four tires. Overinflation causes severe wear on the central part of the tire, while underinflation leads to severe wear on both sides. Solution: Adjust all four tires to the appropriate pressure. Tire dynamic imbalance issues: If there's a problem with tire dynamic balance, the tire may show patchy wear patterns. Solution: Rebalance the tires. Wheel alignment problems: If there are wheel alignment issues, one side of the tire may wear more significantly. Excessive camber causes severe outer edge wear, while insufficient camber leads to severe inner edge wear. Solution: Perform wheel alignment again. Suspension issues: Such as loose ball joints or misaligned front suspension systems. In fact, inaccurate wheel alignment also falls under suspension problems. Suspension issues may cause sawtooth wear patterns on the tire tread or excessive wear on individual tires. Solution: First inspect the condition of independent suspension springs and shock absorbers to identify the specific problem.

13

1

Share

Why does the car shake violently after replacing the fuel injectors?

After replacing the fuel injectors, the car shakes violently because the throttle body is too dirty. Dirty throttle body and excessive carbon buildup in fuel injectors: When a car has been driven for a certain mileage, a dirty throttle body can cause the throttle valve to not close properly or the idle stepper motor to get stuck, both of which can lead to excessively high engine idle speed. Additionally, carbon deposits generated during engine operation can also cause vehicle shaking, especially when starting the car. The engine may shake more violently than usual, and in some cases, it might not start on the first attempt. Therefore, when the vehicle experiences shaking, the throttle body and fuel injectors should be checked first. If the throttle body is found to be too dirty or the fuel injectors have excessive carbon buildup, they should be cleaned promptly. Steps for cleaning the throttle body: If there is a plastic heat shield cover on the engine, remove it. Disconnect the air ducts around the throttle body and note their positions. The side of the throttle body near the combustion chamber is usually dirty, with black carbon deposits, which is the main area to be cleaned. Cleaning the throttle body primarily involves removing carbon deposits, using specialized cleaning solutions or carburetor cleaners. These cleaning agents can be harmful to humans, so gloves and a mask should be worn during cleaning.

6

0

Share

Where is the Focus rearview mirror heating switch located?

The Focus rearview mirror heating switch is located on the rearview mirror adjustment position. Simply press the heating symbol, and when the rear window heating function is activated, the exterior rearview mirror heating function will automatically turn on. The rearview mirror heating feature is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. The heat will dissipate from the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporation occurs, water droplets on the mirror surface will shrink, and fog will gradually disappear, thereby heating the mirror and removing frost. If the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror. These wires consume a significant amount of power. When using the rearview mirror heating function, ensure the car is in an active state. Avoid activating the heating function while the car is stationary to prevent draining the battery and leaving insufficient power to start the vehicle. Other methods for defogging rearview mirrors include: Opening windows for airflow: Crack open the side windows slightly to create air circulation between the inside and outside of the car. As the temperature difference decreases, the fog will gradually disappear. Adjusting the car's air conditioning to the appropriate setting can also use warm air from the AC to defog the mirrors.

8

5

Share

What documents are required for vehicle inspection?

Can driving license points be deducted in a different location?

What are the characteristics of car series from different countries?

What is the process for license plate registration after picking up the car?

What are the common issues causing uneven wear on rear tires?

Why does the car shake violently after replacing the fuel injectors?

Where is the Focus rearview mirror heating switch located?

Do China V diesel vehicles still need to warm up?

How Much Horsepower Does a Speedboat Have?

What brand of engine is used in the Bestune T77?

What Could Be the Reasons for a Motorcycle That Can Start but Not Move?