What documents are required for the first maintenance of Haval H6?

[MarcusAnn]

The items required for the first maintenance include: driver's license; maintenance manual; vehicle registration certificate; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance institution for the vehicle's first maintenance. The precautions are: make an appointment with the 4S store in advance. The first maintenance refers to the initial maintenance after the new car is driven, and the specific time varies from car to car, generally after driving 1000 to 3000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks the end of the running-in period of the car, and it can be driven according to the standard load and normal speed required by the car. The time for the first maintenance is calculated according to the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever indicator is met first, that indicator shall prevail. The first maintenance items include: changing the engine oil, oil filter, cleaning the air filter, checking whether the levels of various oils are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, checking whether the tires are damaged, bulging, etc. Time required: It takes about 2 hours to complete all the work. The most important thing for the first maintenance of a new car is to change the engine oil and oil filter. When changing the engine oil, the oil filter must be replaced together, and the selection of engine oil must refer to the "Vehicle Use and Maintenance Manual", as different models specify the use of different engine oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people will tidy up and clean the car by themselves during holidays, rinsing the body with water and scrubbing with a cloth. Here, it needs to be reminded that the interior of the car body does not need to be directly rinsed with water. If the floor mats are dirty, you can use a vacuum cleaner, or take them out, brush and wash them with detergent, dry them, and then put them back. There are many through holes in the grooves under the rubber mats on the floor of the cab. After water enters, it will not dry by air, but will flow through the through holes to parts such as the gearbox for erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is in short supply, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the brands of antifreeze are different, their chemical functions are also very different. Various functional preservatives will corrode other functional preservatives. Different brands of antifreeze use different preservatives. Do not mix them to avoid unnecessary trouble. Do not lubricate the tire bolts and nuts: When the bolts of the running car are rusty, they are usually oiled so that they can work normally again. In order to prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts are simply lifted or even dropped, leading to driving failure. When promoting the EFI car, do not step on the accelerator: The promoter of the EFI car is different from that of ordinary cars, and its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter promote smoothly.