···
Log in / Register

What Documents Are Required for the Driver's License Test?

5 Answers
VonEvelyn
07/29/2025, 06:45 AM

To apply for a driver's license, you need to prepare the following documents and materials: 1. Fill out the "Motor Vehicle Driver's License Application Form"; 2. Original and photocopy of the applicant's ID card (photocopied on both sides of A4 paper); 3. Temporary residents also need to prepare the original and photocopy of their temporary residence permit (photocopied on both sides of A4 paper); 4. Three one-inch color passport photos with a white background; 5. A medical examination certificate is required. The passing standards for the driver's license test are as follows: 1. Traffic regulations and related knowledge (Subject 1) — Written test, full score is 100, 90 or above is passing (including 90). 2. Field driving (Subject 2) — On-site, actual vehicle. Only pass or fail. Nine compulsory test items (all without poles), including reversing into a garage, narrow road U-turn, parallel parking, stopping and starting on a slope, right-angle turn, curve driving, emergency braking, tunnel, and toll booth card collection. All nine items must be passed to pass the Subject 2 test. 3. Road driving (Subject 3) — Highway or simulated site, actual vehicle. The test is conducted entirely under electronic surveillance + traffic police examination, making the road test more fair.

Was this review help?
7
1
Share
JudeAnn
08/13/2025, 11:51 AM

I've taken the driving test several times, and each time I had to bring my original ID card, which is the most crucial as the test center needs to verify identity. You also need to bring the test appointment confirmation, such as a printed appointment slip or SMS confirmation. Don't forget two one-inch white background photos, as they might be needed for documentation. A copy of the medical examination report is also important, as some places check health certificates. Prepare some small change in cash, as sometimes parking fees are required at the test center entrance. Remember to arrive on time—being half an hour early is safer. Once, I forgot my photos and almost missed my test time. It's best to pack all your items in your bag the night before to avoid last-minute stress. During the test, stay relaxed—nervousness can lead to mistakes. Being well-prepared with these basics significantly increases your chances of passing smoothly.

Was this review help?
20
0
Share
Expand All
DelGabriela
10/07/2025, 02:56 AM

I just finished my driving test recently, and as a beginner, I feel it's really important to pay attention to what to bring. The original ID card is essential—without it, you can't even get through the door. Also, bring the appointment slip, preferably printed out to avoid your phone running out of battery. Prepare a few recent photos, the one-inch kind from a photo studio will do. Wear loose and comfortable clothes for easier operation during the test. Bring a bottle of water and some biscuits, as the waiting time can be long and you might get hungry. The first time, I was so nervous my palms were sweating, and a friend reminded me to bring some spare change for unexpected expenses. Pack all items in a small bag and place it on the passenger seat so you can grab it and go. Bring a jacket for changing weather, as the air conditioning might be cold in summer. Leave early to avoid traffic jams, ensuring safety first.

Was this review help?
4
5
Share
Expand All
KingstonAnn
11/20/2025, 03:18 AM

When taking my driver's license test, I learned from experience that several items are essential: the original ID card for identity verification, the appointment slip to confirm exam eligibility, and two or three one-inch photos in case of last-minute replacements. A copy of the medical examination record is also crucial, proving that health standards are met. Bring a pen and paper to jot down notes while waiting for the exam. Dress simply and avoid flashy outfits that might interfere with camera recognition. Arrive at the test center on time to queue up for check-in. Plan the route in advance to avoid getting lost and wasting time. Stay calm and don't stress—being well-prepared will lead to natural success. Carry basic first-aid items like band-aids, as minor scrapes can happen in the rush. Make sure your phone is fully charged for contacting family.

Was this review help?
13
3
Share
Expand All
LydiaFitz
01/10/2026, 10:08 PM

I enjoy sharing driving test tips, and being well-prepared is key: Your ID card is essential—without it, you’ll be turned away. Don’t forget your appointment slip, whether it’s a printed copy or an electronic version. Bring a few standard one-inch photos, as some test centers use them for on-site documentation. Include a copy of your medical exam report, especially the vision test results. Carry around 50 yuan in small bills for retake fees or incidental purchases. Get a good night’s sleep before the test to stay sharp and avoid mistakes. Wear comfortable shoes for better control of the accelerator and brake. Bring a book or headphones to pass the time in the waiting room. Write a checklist and tick off each item to ensure nothing is forgotten. Following this routine has helped me pass every time.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

What are the precautions for starter motor repair?

Start motor repair precautions are: 1. Disassembly or decomposition of all parts should be carried out after the starter motor has cooled down, otherwise it may cause burns; 2. Before performing maintenance operations, disconnect the negative terminal of the battery. If the battery cables are not removed, touching the starter terminal B may produce sparks, leading to damage to electrical components. The reasons for the starter motor not turning are: 1. Insufficient battery power or loose connections of various wires, dirty terminals causing poor contact; 2. Open circuit in the starter solenoid switch coil or poor contact of the contact disc; 3. Burned contacts of the starter relay, open circuit or burnout of the relay magnetic coil; 4. Bent armature shaft inside the starter motor or overly tight bearings, dirty or burned commutator, excessively worn brushes, too soft springs preventing contact, short circuit, open circuit, or grounding in the armature coil or field coil; 5. Fault in the anti-theft system.
14
1
Share

Is the fuel consumption of Dongfeng Tianlong Flagship 600 horsepower high?

Dongfeng Tianlong 600 horsepower has low fuel consumption, even very fuel-efficient. Additional information as follows: 1. The Dongfeng-style cab is strong and elegant. 2. The robust styling with streamlined dynamism not only reflects the rugged momentum of European and American trucks but also aligns with Eastern aesthetic standards. 3. The three-dimensional Dongfeng emblem, resembling two swords combined, exudes a regal demeanor, giving drivers and passengers a sense of success. 4. The full-steel double-layer bumper fully demonstrates Dongfeng's care for customers, and its appearance is aesthetically pleasing. 5. A pair of bright crystal headlights, shaped like tiger teeth, add the finishing touch, enhancing the kingly dominance. 6. Dongfeng Tianlong has a wide power range, from 230 to 420 horsepower. 7. Dongfeng's new-generation 13-ton single and double-stage heavy-duty axles, incorporating international technology, boast qualities of 'anti-tooth breakage, high load-bearing capacity, high torque, and long lifespan'.
5
5
Share

How long does it usually take for the DMV to restore internet connection?

System upgrades and auxiliary website failures have varying repair times depending on the severity of the issue. Generally, the larger the scope of the upgrade or failure, the longer the repair time will take. For payment system failures, repairs are usually completed within half a day at most. Server room failures or fiber optic cable cuts are less common and typically take about 1-2 working days to fix. Common causes of internet outages: 1. System updates: Like games, traffic management systems require updates, which can temporarily disable the internal network—a relatively common occurrence. 2. Auxiliary website failures: Some services rely on external auxiliary websites, and if these websites experience network issues, certain services may be unable to process approvals. 3. Payment system failures: Network transmission problems can disrupt payment systems, preventing the driver management system from printing tasks. 4. Server room failures: If the server room of a higher-level or provincial department fails, driver management services may be temporarily unavailable. 5. Fiber optic cable failures: Frequent urban construction activities sometimes lead to accidental cuts in signal fiber optic cables.
18
0
Share

Where is the electric seat control module located in the Tiguan?

Under the driver's seat, the seat needs to be removed. Below is relevant information about electric seats: 1. Working principle: Electric seat adjustment can be understood as completing adjustment actions through motors controlled by buttons and other methods. The directional adjustment of the seat is based on three adjustment mechanisms: the seat recliner, seat rail, and seat lift mechanism. Each mechanism can provide adjustments in two or more directions. The more adjustment directions a seat has, the better the driver can find a suitable driving posture and reduce driving fatigue. 2. Function: To provide the driver and passengers with an easy-to-operate, comfortable, and safe driving position.
15
5
Share

What are the reasons why the Xuan Yi one-button start brake cannot be pressed and fails to start?

Here are the reasons why the Xuan Yi one-button start brake cannot be pressed and fails to start: 1. No fuel in the car: Basic common sense, the car will definitely not start if there is no fuel. 2. Battery failure: If the car battery is dead or faulty, it will naturally fail to start. 3. Spark plug issue: The spark plug is a key component in the car's ignition system, so whether the spark plug can function properly affects the vehicle's performance and efficiency. 4. Excessive carbon buildup: Too much carbon buildup in the vehicle can also prevent it from starting, requiring regular cleaning of carbon deposits at the service center.
15
3
Share

What Causes the Brake Pedal to Be Hard to Press in New Energy Vehicles?

Here are the possible reasons why the brake pedal in new energy vehicles is hard to press: 1. Vacuum booster issue: The vacuum booster pump may be leaking or malfunctioning. It's important to note that the force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its power assistance, making it difficult to press. 2. Brake booster pump problem: Pressing the brake pedal after the engine is turned off is also related to the brake booster pump. The brake booster pump continuously generates vacuum only when the engine is running. When the engine is off, it relies on the residual vacuum stored earlier, which typically depletes after a few presses. However, this condition is restored after the engine is started and is not considered a malfunction.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.