What documents are required for Subject 3?

3 Answers
McEva
07/23/25 7:39pm
For the Subject 3 test, you only need to bring your ID card, and then confirm your identity in the car. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle test. Here are the precautions for the Subject 3 test: Conduct a check before getting into the car; Adjust after getting into the car; Body movements; Follow the voice prompts; Adjust your mindset. Conduct a check before getting into the car: Before getting into the car, you need to walk around the car for a check. There are two sensors on the test vehicle. When the examinee walks around the car, they need to be detected by the sensors to complete this step. If this step is missed, points will be deducted. Adjust after getting into the car: After getting into the car, first adjust the seat to a suitable angle and position, then fasten the seat belt. This is the most important step. If you don’t fasten the seat belt, you will be directly judged as failing. Then adjust the rearview mirror and the gear before starting the engine. Body movements: During the test, examinees need to perform certain body movements, such as turning their heads to observe. These movements must be done correctly to avoid point deductions due to improper actions. Follow the voice prompts: During the test, you must operate according to the voice prompts, following the steps of the voice prompts one by one. Do not operate in advance, otherwise points will be deducted. Adjust your mindset: During the test, you must adjust your mindset. Many examinees become extremely nervous when hearing the voice prompts and easily forget the next steps. Examinees must be mentally prepared before the test.
Was this review help?
2
2
Share
StPeter
08/10/25 3:15pm
When preparing for the Subject 3 driving test, I made a specific checklist: the original ID card is a must—don’t forget the one used during registration. Print a hard copy of the test appointment confirmation and keep it in your bag, or save the electronic version in your phone’s album beforehand—last time, the guy ahead of me was sweating buckets because his phone froze and couldn’t display the QR code. Also, carry your student permit, as some test centers might randomly check your medical report, especially the vision test page. Oh, and even though pandemic restrictions have eased, a few test sites still require masks, so it’s best to stash a couple extra in the glove box. Pack all these items into a clear document bag the night before to avoid frantic backpack digging on test day.
Was this review help?
15
5
Share
Expand All
McSophie
09/23/25 2:28am
On the exam day, I just tossed my entire document folder onto the passenger seat. The ID card is definitely a must-have—nowadays, everything is face-recognition verified, and you can't even get through the door without it. Make sure to check that your ID isn't expired; last year at our driving school, someone got stopped at the exam site with an expired ID. The paper exam reservation slip can actually be replaced with a digital version, but to be safe, I printed it out. The instructor specifically reminded us to bring the student ID, although the chance of being checked is slim. I also packed a water bottle and tissues since nervousness tends to make you thirsty and sweaty. All the documents were neatly organized in an accordion folder, making it hassle-free to hand the whole thing over when the examiner checks.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to adjust the brakes of a sedan?

The method to adjust the brakes of a sedan is: by adjusting the nut below the pedal. The brake, also known as the braking system, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. Its working principle is: fixing a wheel or disc on the high-speed shaft of the machine, installing corresponding brake shoes, belts, or discs on the machine base, and generating braking torque under external force. The method to replace car brake pads is: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the installation bracket of the brake disc and install the new brake pads.
18
4
Share

Why Will Insurance Companies Deny Claims for Secondary Ignition?

Damage to the vehicle caused by human factors is not covered by insurance. Below is relevant information about secondary ignition: 1. Introduction: During water wading, if water blocks the air intake, causing the vehicle to stall, attempting to restart the engine is referred to as secondary ignition. 2. Precautions: It's important to note that even if the water on the road has receded, you should avoid attempting to restart the engine. This is because there may still be water in the intake pipe, and the electrical system may also malfunction after being submerged. It's best to contact a towing company. Do not try to save on towing fees at the risk of greater losses. When arranging for towing, clearly communicate to the staff that the vehicle stalled during water wading. For easier towing, the towing company may shift the gear to neutral. Without understanding the situation, they might attempt to start the engine, so it's crucial to explain the circumstances clearly.
15
4
Share

Can You Choose Not to Proceed on a Green Light During Driving Test (Subject 3)?

You can choose not to proceed on a green light during the Subject 3 driving test, and stopping to wait for the next green light will not result in point deductions. Below is a detailed introduction to Subject 3: 1. Road driving skills test for Subject 3: The content generally includes: preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Safe and civilized driving knowledge test for Subject 3: The content generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
8
0
Share

What Causes Excessive Noise in Sedans?

The reasons for excessive noise in sedans are: 1. Carbon buildup in the engine; 2. Shock absorber failure; 3. Spark plug carbon buildup; 4. Tire aging; 5. Internal damage to the valve guide; 6. Cooling system failure; 7. Poor quality engine oil; 8. Engine misfire; 9. Large gaps in the cabin or vehicle body. Solutions for excessive car noise include: 1. Applying sound-absorbing foam material under the engine hood; 2. Installing sound-absorbing cotton material in the trunk, at the bottom of the trunk, and on the wheel arches on both sides of the trunk; 3. Installing professional damping plates in areas prone to noise; 4. Adding sealing strips inside the doors; 5. Replacing tires.
19
5
Share

Why is there noise when the car window glass is raised or lowered?

The reasons for noise when the car window glass is raised or lowered are: 1. Loose fastening screws or window regulator brackets inside the window glass; 2. Aging of the window glass sealing strip; 3. Debris in the window glass guide rail. Car windows are an important part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of drivers and passengers. They are divided into front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. The solutions for abnormal noise when raising or lowering car window glass are: 1. Tighten the loose door glass at a professional repair shop; 2. Replace the window glass sealing strip; 3. Clean debris from the guide rails.
1
0
Share

What brand is Venucia?

Venucia is a domestic independent automotive brand under Dongfeng Motor Corporation. Taking the 2020 Venucia Star as an example, its body dimensions are: length 4691mm, width 1905mm, height 1694mm, with a wheelbase of 2756mm, minimum ground clearance of 192mm, and a fuel tank capacity of 60 liters. The 2020 Venucia Star is equipped with a 1.5T turbocharged engine, delivering a maximum power of 140kW and a maximum torque of 260Nm, paired with a 6-speed manual transmission. It features a front MacPherson independent suspension and a rear multi-link independent suspension.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.