What documents are required for motorcycles to refuel at gas stations?

1 Answers
Sarah
07/29/25 4:37pm
Motorcycles do not require any documents to refuel at gas stations. Below are specific details regarding motorcycle refueling: Precautions: According to the national "Gas Station Safety Operation Regulations," motorcycles must be turned off upon entering the station, and riders must dismount. After refueling, the motorcycle must be manually pushed to a distance of at least 4.5 meters before it can be started. Distance: Currently, gas stations across the country are promoting the use of fuel cans for motorcycle refueling, primarily to maintain a 4.5-meter separation between the motorcycle and the fuel dispenser. This does not mean refueling in a fixed area 4.5 meters away using a fuel can, but rather requires that the fuel can must be made of conductive metal material to prevent static electricity from igniting gasoline. Additionally, the refueling personnel must be professional gas station operators.
Was this review help?
13
1
Share
More Forum Discussions

What is the tire size of the Audi A4L?

The tire size of the Audi A4L is 225/55r16. 225/55r16 indicates that the tire width is 225mm, the aspect ratio is 55, 'r' stands for radial tire, and 16 means the tire can be mounted on a 16-inch wheel rim. Taking the 2020 Audi A4 as an example, it belongs to the mid-size car category with body dimensions of: length 4737mm, width 1842mm, height 1428mm, wheelbase 2825mm, fuel tank capacity 55 liters, and trunk capacity 505 liters. The 2020 Audi A4 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
10
5
Share

How many cylinders does the Trumpchi GA6 engine have?

Trumpchi GA6 engine is a three-cylinder engine, with a firing order of 1 and 3 and 2 or 1 and 2 and 3. Similarly, the crankshaft rotates 720 degrees for one intake, compression, power, and exhaust stroke, but only three cylinders can do work, with each cylinder doing work for 180 degrees of crankshaft rotation. The car is equipped with a 1.5-liter turbocharged engine, with a maximum power of 124 kW, a maximum torque speed of 1700 to 4000 rpm, and a maximum power speed of 5000 rpm. The body dimensions are 4891mm in length, 1850mm in width, and 1505mm in height, with a wheelbase of 2815mm.
17
3
Share

Can the seat belt of a sedan be replaced?

The seat belt of a sedan can be replaced, and it also requires regular maintenance. The seat belts in the rear seats or the front passenger seat are used less frequently compared to the driver's seat belt. It is recommended to conduct regular inspections. If there is a malfunction such as the belt getting stuck, do not attempt to disassemble it yourself; it is advisable to seek professional repair services. The method for replacing a sedan seat belt is as follows: 1. Locate and remove the sensor wire of the seat belt buckle; 2. Remove the seat cushion, take off the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Locate and remove the seat cushion sensor inside the seat cushion; 4. Install the new seat belt buckle onto the seat.
1
2
Share

How to Deal with Black Paint Scratches on a White Car?

The methods to deal with black paint scratches on a white car are: 1. Use a high-strength paint cleaner to wash the entire car. When using the cleaner, avoid particles and dust causing new scratches during the polishing process; 2. Use a mechanical polishing machine along with a mirror-finish treatment agent to remove the black paint. The methods for maintaining the car's paint surface are: 1. Remove dust from the car body promptly to minimize the adsorption of dust due to static electricity; 2. Rinse rain stains with clean water as soon as possible after rain to avoid damaging the paint surface; 3. Avoid washing the car under direct sunlight or high temperatures; 4. Use clean and soft cloths or sponges for washing to prevent metal shavings and sand particles from causing scratches.
15
2
Share

Where is the mirror folding switch for the Trumpchi GA4?

The mirror folding switch for the Trumpchi GA4 is located on the left armrest in the driver's cabin. At the very top of the armrest position, there is a button with an arrow, which is the mirror folding switch. The buttons represent: the L button stands for the left electric adjustment switch; the R button stands for the right electric adjustment switch. The Trumpchi GA4 is positioned as a compact car, with body dimensions of 4692mm in length, 1805mm in width, 1500mm in height, and a wheelbase of 2660mm; all models are front-wheel drive. In terms of suspension, the Trumpchi GA4 features a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
20
5
Share

How to Use Rearview Mirrors for Straight-Line Reversing?

When reversing in a straight line, focus on the rear of the car. To make the rear of the car turn right, steer to the right. To make it turn left, steer to the left. Below is an introduction to reverse parking: 1. Introduction: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the car in a designated area. 2. Dimensions: The test area is 16M long and 6.83M wide, with the parking space measuring 5.25M in length and 2.31M in width. 3. Types: The first type is the 'non'-shaped reverse parking, commonly found in large shopping centers. The second type is the roadside 'one'-shaped reverse parking, also known as parallel parking.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.