What documents are required for motorcycles to access highways?

2 Answers
Harriet
07/24/25 2:54am
Motorcycles require a driver's license to access highways. Below is some information about the C1 driver's license: 1. C1 License Regulations: Driving an electric tricycle with a C1 license is considered a mismatch of the permitted vehicle type. Driving a motor vehicle that does not match the permitted vehicle type is penalized as driving without a license, with fines and possible detention of up to 15 days. According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' driving a vehicle that does not match the permitted vehicle type results in a 12-point deduction. 2. Introduction to C-Class Licenses: The C1 license for small cars allows driving manual or automatic transmission vehicles with up to 9 seats (including 9 seats), small and micro passenger vehicles, light and micro cargo vehicles (all small trucks with blue license plates), light, small, and micro special operation vehicles, and small automatic transmission cars (C2). It also permits driving low-speed cargo vehicles (C3), three-wheeled cars (C4), and ordinary three-wheeled motorcycles (D license). The D license allows driving three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, as well as E and F class vehicles.
Was this review help?
19
1
Share
NolanLee
08/10/25 10:30pm
When riding a motorcycle on the highway, I remember that several documents must be carried, otherwise you might be stopped and fined. Every time I travel, I bring a valid motorcycle driver's license, which proves that I am qualified to ride. Additionally, the vehicle registration certificate or logbook must also be prepared, as it shows the motorcycle's legal identity and owner information. Don’t forget the insurance proof, usually mandatory third-party liability insurance, which can protect both parties in case of an accident. A personal ID card is also crucial, as sometimes the police will verify it. I’ve also noticed that the motorcycle itself must meet highway requirements, such as having a sufficient engine displacement, and some places even require an annual inspection label. In short, with all the documents in order and a helmet properly worn, you can safely and compliantly enjoy the thrill of highway riding while avoiding unnecessary trouble.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty motorcycle relay?

When a motorcycle relay is damaged, it will cause an open circuit in the starting circuit, preventing the starter from operating normally. Additionally, it can burn out the motor and drain the battery, rendering the motorcycle unusable. Below is some information about motorcycle relays: Function: Most relays used in motorcycles are designed to protect switch contacts and may also add certain functions. If a relay is damaged, its corresponding functions will fail, making it impossible to use normally. Development: In the past, motorcycles only had starter relays. However, with continuous advancements in production technology, modern motorcycles increasingly utilize additional relays such as headlight relays, turn signal relays, and horn relays.
17
1
Share

What is the difference between platinum spark plugs and iridium spark plugs?

The difference between iridium spark plugs and platinum spark plugs lies in their electrode materials. Iridium spark plugs have a higher melting point, allowing their center electrodes to be made thinner, requiring lower ignition voltage, while platinum has a lower melting point than iridium. Under high-temperature conditions, iridium spark plugs can maintain more stable ignition performance. Below are expanded details: 1. Different electrode materials: The distinction between iridium and platinum spark plugs stems from their electrode materials. Both iridium and platinum are rare metals with higher melting points, enabling them to remain stable under the high temperatures generated by discharge and combustion. However, there are significant differences between iridium and platinum spark plugs. 2. Different melting points: Due to iridium's higher melting point, the center electrode can be made thinner, requiring lower ignition voltage and improving discharge performance. Although platinum has a lower melting point than iridium, under normal conditions, platinum spark plugs can still deliver excellent performance and are designed for stability, typically lasting up to 100,000 kilometers under standard conditions. 3. Different durability: Iridium is much harder than platinum, giving iridium spark plugs higher durability and a longer lifespan compared to platinum spark plugs. Iridium spark plugs also ignite faster than platinum ones, resulting in better acceleration performance in engines equipped with iridium spark plugs. 4. Different costs: Iridium spark plugs are more expensive due to higher production costs. Under normal conditions, platinum spark plugs offer better cost-performance advantages. While iridium spark plugs outperform platinum ones in overall performance, platinum spark plugs have significant cost-performance benefits.
1
3
Share

How to Use ETC on Toll-Free Highways?

Here are the methods for passing through toll-free highways with ETC: 1. Enter through the ETC lane and exit through the ETC lane—no fee will be deducted. 2. Enter through the manual lane and exit through the manual lane—no fee will be deducted. 3. Enter through the manual lane and attempt to exit through the ETC lane—since there is no entry information, the exit barrier will not lift, preventing exit. 4. Enter through the ETC lane and exit through the manual lane—passage is allowed without fee deduction. How ETC works: When a vehicle enters the highway via an ETC lane, the system records the entry information in the vehicle's ETC device. When the vehicle exits the highway via an ETC lane, the system deducts the fee based on the entry information stored in the ETC device.
1
0
Share

What are the reasons for inaccurate fuel gauge readings?

The reasons and solutions for inaccurate fuel gauge readings are as follows: 1. Different vehicles have varying fuel gauge line design schemes, which also affect the inaccuracy of the fuel gauge. Some show faster readings in the first half and slower in the second half, while others show the opposite. Solution: It is recommended to go to a repair shop for adjustment. 2. The sensor is the device that directly affects the inaccuracy of the fuel gauge. It manifests as obstacles in data transmission or inaccurate transmission, causing the fuel gauge pointer to fail to reach the accurate reading position. Solution: It can only be repaired by professional debugging equipment at a repair shop. 3. The issue of fuel gauge display is the most widespread, caused by pointer jamming or impurities inside the gauge. Solution: You can handle it yourself through cleaning measures, or have it maintained by a professional repair shop.
12
0
Share

Is Venucia a Japanese Car?

Strictly speaking, Venucia is not a Japanese car. Venucia is a brand for which Dongfeng purchased technology from Nissan, meaning they acquired the technology for the TIIDA model. Now, the technology belongs to Dongfeng, and the suppliers for the parts are determined by Dongfeng. Most of these suppliers are not the original Japanese ones but are sourced nationwide. Here is more information about Venucia: 1. The Venucia brand was established on September 8, 2010. The dimensions of the Venucia vehicle are 4630mm in length, 1845mm in width, and 1653mm in height. Its models include: R30, R50, R50X, D50, T70, T70X, T90, and the Venucia Star. 2. The Venucia Star is equipped with a 1.5T turbocharged engine, delivering a maximum power of 140kW and a maximum torque of 260N·m, paired with a 7DCT transmission. Additionally, the Venucia Star also features a 48V mild hybrid system, with a minimum fuel consumption of 6.1L per 100 kilometers.
8
2
Share

Which is larger, the intake valve or the exhaust valve?

Exhaust valve clearance is larger than intake valve clearance. This is because a larger exhaust valve clearance facilitates better expulsion of combustion exhaust gases, hence it is set larger than the intake valve clearance. Below are the relevant details: Standard clearance for intake and exhaust valves: The clearance for intake valves typically ranges between 0.20mm and 0.25mm. In contrast, the clearance for exhaust valves is naturally larger due to thermal expansion, generally ranging between 0.29mm and 0.35mm. Valve clearance inspection and adjustment: Valve clearances for all cylinders should be adjusted uniformly to prevent engine imbalance during operation. Adjustments must be made in accordance with the specific requirements and regulations set by the vehicle manufacturer.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.