···
Log in / Register

What documents are required for duty-free vehicle processing?

1 Answers
OGraham
09/09/25 2:41am

To apply for duty-free vehicle processing, you need to submit all relevant documents to the local customs authority. Required materials typically include the Return Certificate for Overseas Students, graduation or degree certificate, ID card, household registration booklet, passport, and any other documents required by the local customs. Below is additional information: Confirm the vehicle model: Verify the model, price, and purchase location of the car. Duty-free vehicles available for returning overseas students are limited to domestically produced joint-venture brands; original imported models do not qualify for the duty-free policy. Most joint-venture brands are now included in the duty-free vehicle list, meeting the needs of most students. Wait for vehicle pickup: After customs approval, you will receive a customs seal. Take this seal to the manufacturer or intermediary company to purchase the vehicle, transfer the payment to the intermediary's designated account, and then wait for vehicle pickup. After pickup, bring the invoice and application form back to customs to collect the purchase permit. Complete the formalities: With the purchase permit, go to the tax bureau to complete the duty-free procedures. Bring the invoice, purchase permit, vehicle certificate, passport, ID card, and other required documents, fill out the tax declaration form, and then you will receive the duty-free certificate.

Was this review help?
20
5
Share
More Forum Discussions

What are the differences between the Panamera Sport Turismo and the regular version?

Here are the differences between the Panamera Sport Turismo model and the regular version: 1. Different rear design; 2. Different trunk space. Apart from these, there are no other differences between the two models. Below is an introduction to the Panamera: 1. Powertrain: The Panamera uses two engines in total, one is a 2.9-liter twin-turbocharged engine, and the other is a 4.0-liter twin-turbocharged V8 engine. Here are the specific details: (1) The Panamera's 2.9-liter twin-turbocharged V6 engine delivers 330 horsepower and a maximum torque of 450 Nm. The maximum torque of this engine is achieved between 1,340 and 4,900 rpm, and the maximum power is achieved between 5,400 and 6,400 rpm. (2) The Panamera's 4.0-liter twin-turbocharged V8 engine delivers 460 horsepower and a maximum torque of 620 Nm. The maximum torque of this engine is achieved between 1,800 and 4,500 rpm, and the maximum power is achieved between 6,000 and 6,500 rpm. 2. Suspension: The Panamera uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. Both the double-wishbone suspension and the multi-link suspension can enhance the car's handling performance.
8
1
Share

What are the problems with flood-damaged cars?

Flood-damaged cars can have various issues affecting their electronic control systems, engines, interior materials, and wiring systems. A flood-damaged car refers to a vehicle that has been submerged in water. The internal electronic control systems may suffer damage, as rainwater mixed with contaminants is highly corrosive, potentially impairing electrical functions and future usability. Never attempt to start or crank the engine of a flood-damaged car, as this can cause severe deformation of the engine connecting rods. Interior components like carpets and seats may become deformed, rough, or develop odors due to prolonged soaking, leading to bacterial growth. Wiring may short-circuit due to moisture. Methods to identify a flood-damaged car: Inspect the engine bay: Even after cleaning, traces of mud or water stains may remain on some wiring harnesses if the vehicle was submerged. Check the interior: If the interior was flooded, the car would have been dried out. Look for signs of wrinkling or other irregularities on seats that may indicate water damage. Examine metal components under the interior: For example, check under the seats for rust on springs or support rods, which could indicate flood damage (though poor rustproofing by the manufacturer is also a possibility). Inspect seat belts: Pull out all seat belts fully to check for mold or dampness. If multiple belts show these signs, the car was likely flooded. Check sealed areas between components: Since interior parts are tightly fitted together, mud residue in these areas may indicate water damage. Inspect the undercarriage: The undercarriage provides the most direct evidence of a car's condition. Look for obvious rust, which would be quite noticeable if the undercarriage was submerged for an extended period.
1
2
Share

Can You Drive Without a Vehicle License in the Car?

Driving without a vehicle license is not allowed. Below is more detailed information on why you cannot drive without a vehicle license: 1. Detention of the Vehicle: If a motor vehicle on the road does not display a license plate, inspection sticker, insurance sticker, or if the driver fails to carry the vehicle license or driver's license, the traffic management department of the public security authority must detain the vehicle. 2. Penalty Regulations: If the concerned party provides the corresponding license plate, sticker, or completes the necessary procedures, the vehicle should be returned promptly. For cases involving intentional obscuring, damaging, or improper installation of the license plate, penalties will be imposed according to Article 90 of the Traffic Law.
1
1
Share

What does it mean when the EPC light comes on and then goes off after restarting?

It is normal for the EPC light to come on and then go off after restarting. After turning on the ignition, the fault light illuminates, and if the system detects no faults after starting the engine, the light will turn off. In the EPC system, the traditional throttle cable is replaced by a sensor in the pedal assembly. The engine control unit calculates the optimal target throttle opening based on the position data feedback from the pedal sensor and sends a signal to the throttle drive motor to rotate the throttle to this angle. Below are some related details: 1. Basic Principle: Electronic throttles are typically used in gasoline engines. To meet the requirements of the three-way catalytic converter, the air-fuel ratio should be maintained around 1 during operation. This requires a proportional relationship between the fuel injection volume and the throttle opening. The onboard computer calculates or references a table based on the throttle pedal opening and the engine's air intake collected by sensors to determine the appropriate fuel injection volume, ensuring the engine's air-fuel ratio meets the requirements. 2. Application in Vehicles: Most vehicles have an EPC indicator. After turning the key, the vehicle begins a self-check, and the EPC light will illuminate for a few seconds before turning off. If the light remains on after starting the vehicle, it indicates a mechanical or electronic system fault. 3. Generally, the EPC light may come on for the following reasons: (1) Dirty throttle: It should be cleaned. (2) Brake light not working: The brake switch and wiring need to be checked. (3) Fuel quality issues.
5
1
Share

What Causes a Motorcycle to Make Noise but Not Start When Igniting?

Motorcycle makes a squealing noise but fails to start due to insufficient battery power, poor battery terminal connection, or inadequate grounding of the ground wire. Below are the relevant explanations: 1. Motorcycle: A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel direction. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment. 2. Working Principle of Motorcycle Igniter: The working principle of a motorcycle igniter involves coordinating with a sensor source to determine the spark timing of the spark plug. When the high-voltage coil amplifies the voltage and supplies it to the spark plug for ignition, the spark ignites the mixture of fuel and air, causing an explosion that drives the piston to move up and down within the cylinder, thereby starting the motorcycle engine.
16
4
Share

How to reset the wrench light on the Shuailing T6?

Here are the specific steps to reset the wrench indicator on the Shuailing T6 dashboard: 1. Insert the key into the ignition, but do not turn it. 2. Press and hold the trip odometer reset button for 5-10 seconds, then turn the key to the ON position. 3. Continue holding the button for another 5-10 seconds before starting the engine. 4. If the wrench light doesn't disappear, repeat the process a few more times. 5. Note that maintenance intervals vary by manufacturer and vehicle model. Refer to your owner's manual for the correct service schedule. After maintenance is completed, technicians will reset the maintenance light using specialized equipment.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.