What documents are required for a motorcycle to be on the road?

1 Answers
McAlexandra
07/29/25 7:08pm
Motorcycles on the road need to display license plates and carry the vehicle registration certificate and driver's license. The following are precautions for motorcycle riding: 1. Driving on dirt roads: When riding on dirt roads, it is necessary to reduce speed because dirt roads are always uneven, so high-speed riding will cause severe vehicle bumps, shortening the vehicle's service life. 2. Uphill driving: If there is a sharp turn or unclear road after going uphill, you can first accelerate to climb the slope, then slow down when approaching the top of the slope, and continue driving after clearly seeing the road. 3. Driving on sandy roads: When riding on sandy roads, due to the soft surface of the sandy road, the rolling resistance is high when the vehicle passes through, and the wheels may sway left and right with unstable handlebars. Therefore, it is necessary to slow down in advance and avoid using emergency brakes.
Was this review help?
1
5
Share
More Forum Discussions

How many body colors does the Corolla have?

The Corolla comes in 8 body colors, which are Super White, Pearl White, Silver Metallic, Black Mica, Platinum Bronze Metallic, Red Mica Metallic, Light Yellow Mica Metallic, and Dark Brown Mica Metallic. The Corolla's body dimensions are: length 4635 mm, width 1780 mm, height 1455 mm, wheelbase 2700 mm, ground clearance 152 mm, fuel tank capacity 50 liters, and the body structure is a 4-door 5-seater sedan. The Corolla is equipped with a 1.2T turbocharged engine, with a maximum power of 85 kW, maximum torque of 185 Nm, paired with a 10-speed continuously variable transmission.
10
5
Share

What is the appropriate level to fill the antifreeze to?

Antifreeze should be filled to the level between the upper mark (MAX) and the lower mark (MIN). During the use of the car, antifreeze will inevitably be consumed, so it is necessary to regularly check the antifreeze level. Open the engine hood and look for a symbol resembling a triangular thermometer, which indicates the antifreeze reservoir. The antifreeze reservoir has level markings, and the normal antifreeze level should be between the highest and lowest marks (MAX-MIN). Here is some related information about antifreeze: 1. Introduction: The full name of antifreeze should be antifreeze coolant, meaning a coolant with antifreeze function. 2. Function: Antifreeze can prevent the coolant from freezing and expanding in cold winter, which could crack the radiator and damage the engine cylinder head.
12
2
Share

What Causes Bearing Seizure and Crankshaft Locking?

Bearing seizure and crankshaft locking occur due to: 1. Poor quality of crankshaft and bearings with inadequate surface finish on journal and bearing surfaces: During cold starts under heavy load, the engine oil's high viscosity at low temperatures prevents sufficient lubrication, causing metal fusion and seizure. 2. Improperly rebuilt engines: Incorrect installation of main or connecting rod bearings may lead to improper clearance adjustment, resulting in bearing seizure. Additional information about bearing seizure: 1. Overview: Bearing seizure represents one of the most severe engine failures. 2. Mechanism: This phenomenon occurs when severe wear develops between the crankshaft and main/connecting rod bearings due to absent oil film protection, causing extreme surface temperatures that lead to mutual sintering and locking between crankshaft journals and bearings, rendering the engine inoperable.
2
4
Share

What are the reasons for the inability to turn off the engine with one-button start?

There are several reasons why the engine cannot be turned off with one-button start: 1. Different models, different operations: The operation varies among different car models. Some models require a long press to turn off the engine, while others need to be pressed twice—once to turn off the engine and again to cut off the power to the entire vehicle. Some models only require a single press to turn off the engine. 2. Key not detected: Sometimes, strong nearby magnetic fields can cause interference, preventing the key from being detected. Solution: Align the key with the one-button start. 3. Battery issues: The engine may also fail to turn off if the battery is dead or its voltage is below 12V. In such cases, a long press can turn off the engine.
2
0
Share

How often should the transmission fluid be changed for a Camry?

Camry requires transmission fluid changes every two years or 40,000 kilometers. Transmission fluid has cleaning properties, resists low temperatures, and provides highly effective lubrication even in cold conditions, helping to lubricate and prolong the lifespan of the transmission components. The Camry's body dimensions are: length 4900mm, width 1840mm, height 1455mm, with a wheelbase of 2825mm and a fuel tank capacity of 60 liters. The Camry is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 131kW and a maximum torque of 210Nm, paired with a CVT continuously variable transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of E-type multi-link independent suspension.
7
1
Share

Does the X-Trail have a break-in period?

The X-Trail does have a break-in period. The break-in period refers to the initial driving distance after the vehicle leaves the factory, during which the engine components wear in smoothly. The break-in mileage ranges from 1,000 to 3,000 kilometers, with the first maintenance typically around 5,000 kilometers. The X-Trail's body dimensions are: length 4,675mm, width 1,820mm, height 1,722mm, wheelbase 2,706mm, and minimum ground clearance 208mm. The X-Trail is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 111kW and a maximum torque of 194Nm, paired with a CVT continuously variable transmission.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.