What Documents Are Required for a Driver's License Physical Examination?

3 Answers
DiHolden
07/25/25 2:16am
A driver's license physical examination requires an ID card and the examination fee. You will need to fill out forms during the examination. Nowadays, a single ID is sufficient for obtaining a driver's license, so bringing your ID card is all you need for the physical examination. Generally, after paying the tuition fee, the driving school will record your facial information, or you may need to submit a recent one-inch, white-background, color, bareheaded, front-facing photo taken within the last six months. If your facial information was recorded at that time, you won't need to bring additional photos for the physical examination. Additionally, some locations also record facial information during the examination, which is then used as the photo on the examination form, so simply bringing your ID card is sufficient. Physical examination requirements for a driver's license: For a C1 or lower-class license, the height requirement is at least 150 cm, while for a C1 or higher-class license, it's at least 155 cm. Weight is also checked, though the requirement is generally not strict, and you can fill it in directly after the examination. The examination checks for any motor function impairments in the limbs, torso, neck, and other movement-related areas. It also verifies whether both thumbs are intact and whether each hand has at least three fully functional fingers. For a C1 or lower-class license, the vision requirement is at least 4.9, while for a C1 or higher-class license, it's at least 5.0. If you have monocular vision impairment, you can apply for a C1 or lower-class license if the other eye has a vision of at least 5.0 and a horizontal field of vision of at least 150 degrees.
Was this review help?
6
3
Share
JakeDella
08/11/25 11:38am
I remember needing to prepare a few things for the driver's license medical examination. You must bring a valid identification document, such as an ID card or passport, as this is a basic requirement. Also, prepare several recent 1-inch bareheaded photos, usually with a white background, for making the driver's license. The medical examination fee is around 100 yuan, and it's advisable to bring cash or a bank card, as the specific cost may vary by location. The examination includes a vision test (wear glasses or contact lenses and adjust them in advance), a hearing check, blood pressure measurement, and a brief health questionnaire. The entire process takes less than half an hour. I prefer to make an appointment in advance to reduce waiting time, as it can take longer when it's crowded. It's best to bring your old driver's license if you're renewing it. Finally, a reminder: the purpose of the medical examination is to ensure driving safety, and if your vision or health is not up to standard, you may need a re-examination, so make sure to get enough sleep before going.
Was this review help?
15
0
Share
Expand All
Marty
09/27/25 2:33am
I believe preparing for a driver's license medical exam should be streamlined and efficient. The main items to bring are identification, whether it's an ID card or other official documents. Then, one or two clear photos, preferably 1-inch without a hat, will suffice. The medical exam fee fluctuates between 50 to 150 yuan, and carrying cash is the safest option. The exam will test vision (it's advisable to self-test beforehand to avoid errors), hearing, and basic health indicators; I've gone through this process multiple times, and it's quite quick. Don't forget to bring your old license if you're renewing, as it makes things smoother. Overall, these materials are essential, and missing any could result in a wasted trip. Making an appointment can help avoid peak times, and checking local regulations in advance is wise, as additional documents might be required due to regional differences. The goal is safe driving, so don't underestimate the vision test.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of a 10-year-old Sportage 2.0 automatic transmission?

The fuel consumption of a 10-year-old Sportage 2.0 automatic transmission is around 12 liters per 100 kilometers. Meaning of fuel consumption: Fuel consumption generally refers to the constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. Fuel consumption testing: Testing can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is calculated using the "flow meter method" or "carbon balance method." The fuel consumption test method for passenger cars adopts speeds of 90 km/h and 120 km/h; for commercial vehicles, the test method starts at a speed of 20 km/h, with speeds selected in integer multiples of 10 km/h up to 90% of the maximum speed, and at least 5 test speeds are measured. During road tests, standards such as test conditions, test methods, and test road selection in the national standards must be followed.
16
4
Share

Can Shell Helix Ultra Run for 10,000 Kilometers?

Helix Ultra can run up to 10,000 kilometers, but prolonged use under such conditions may cause damage to the engine. Performance Choices: If you prioritize long-lasting oil performance, Mobil oil is a good choice; if you focus on engine cleanliness, Shell lubricants are recommended; for lubricants with strong oil film toughness, Castrol is suggested. Driving Conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, it is advisable to appropriately increase the viscosity of the lubricant. Engine Types: For naturally aspirated engines, mineral oil or semi-synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity, preferably fully synthetic oil.
16
1
Share

What is a Subaru?

Subaru is a division of Fuji Heavy Industries (FHI) specializing in automobile manufacturing, established in 1953. Initially focused on car production, it also manufactures aircraft and various engines, making it a manufacturer of diverse types and multi-purpose transportation equipment. The logo of Fuji Heavy Industries' Subaru vehicles features a cluster of six stars. Below is an introduction to Subaru: 1. Introduction: In Japanese, Subaru means "Pleiades" (すばる), and its corporate logo represents the six-star cluster of the Pleiades (known as "Mao Xiu" in ancient Chinese constellation classification), which is also the emblem of Subaru vehicles. 2. Fuji Heavy Industries Introduction: Fuji Heavy Industries is a leading Japanese automobile manufacturer. After terminating its capital and business cooperation with General Motors, the company received investment from Toyota Motor Corporation. Subaru has now become a subsidiary under Toyota's control.
7
5
Share

Can Cars Be Loaned Out Freely?

No. You cannot lend your car to someone without a driver's license. If caught, you may be fined and your motor vehicle driver's license may also be revoked. Even lending to someone with a valid driver's license requires caution, as you may bear corresponding liabilities in case of a traffic accident. Regulations: Driving a motor vehicle without obtaining a motor vehicle driver's license, or when the license is revoked or temporarily suspended; handing over a motor vehicle to someone who does not have a driver's license or whose license is revoked or temporarily suspended. Driver's License Suspension: If a motor vehicle driver accumulates 12 penalty points, refuses to attend the study session notified by the traffic management department of the public security organ, or refuses to take the exam, the traffic management department of the public security organ will announce the suspension of their motor vehicle driver's license.
2
2
Share

Will a Harley-Davidson Rust if Exposed to Rain?

As long as the body is made of metal, it will undergo oxidation reactions with oxygen in humid environments, leading to rust. Engine Displacement Classification: Moped (below 50cc), small-displacement motorcycle (50cc-250cc), mid-size (400cc-750cc), large-displacement (above 600cc). All motorcycles above 600cc are referred to as large-displacement. Calculating Engine Displacement: Bore: The diameter of the cylinder is referred to as the bore. Stroke: When the piston moves reciprocally within the cylinder, the distance it travels from the top dead center (TDC) to the bottom dead center (BDC) is called the piston stroke, or simply the stroke.
17
3
Share

Can the engine hood be opened to cool down?

No, the engine hood should not be opened to cool down. Automobile cooling system: Generally, the cooling system of a car consists of a water pump, radiator, cooling fan, thermostat, coolant, cooling water channels, etc. This system can automatically adjust the cooling speed according to the current working state of the engine. Function of coolant: Coolant can effectively prevent engine failure, prevent the radiator from overheating, and provide long-term protection for water temperature, so coolant can be used all year round. Function of coolant: Coolant, glycerol-based coolant, ethylene glycol-based coolant. The function of coolant is to cool the engine. Coolant is also called antifreeze. If the coolant is insufficient, it cannot effectively cool the engine, leading to abnormal engine operation. Coolant can effectively prevent engine failure, prevent the radiator from overheating, and provide long-term protection for water temperature, so coolant can be used all year round.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.