What documents are required for 2021 vehicle annual inspection?

1 Answers
SanJanelle
07/29/25 10:21am
For the 2021 vehicle annual inspection, you need to bring the original vehicle license, duplicate of compulsory traffic insurance, and a copy of your ID card. Notes for annual inspection: During the inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the lighting circuit and whether the bulbs are aged, replacing relevant parts if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the inspection to pass the test. Annual inspection procedure: First, after submitting the inspection application, an online inspection will be conducted. Drive the vehicle into the automatic inspection area to sequentially check whether the exhaust, speed, lights, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then inspect the body appearance, checking details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all items pass, you can proceed to pay the inspection fee and collect the vehicle license and certification label. If any items fail, the owner must repair them and participate in a re-inspection until all items pass before proceeding with the visa procedures.
Was this review help?
9
5
Share
More Forum Discussions

What are the types of NGK spark plugs?

Here are the types of NGK spark plugs: 1. Iridium Alloy Spark Plug: The center electrode is made of iridium alloy, and the outer electrode discharge area also uses platinum alloy, making it a high-performance, long-life spark plug that can suppress electrode wear. 2. High Ignition Iridium Alloy Spark Plug (SPE Type): By adopting a fine-diameter center electrode and a bevel-cut design at the front of the outer electrode, it can concentrate the spark at the front while suppressing quenching effects. Additionally, square platinum alloy particles are welded onto the outer electrode to ensure durability. 5. High Ignition Iridium Alloy Spark Plug (PSPE Type): By shortening the outer electrode, it reduces the coverage effect on the center electrode and minimizes quenching effects, further enhancing ignition performance. It also suppresses overheating of the outer electrode, providing excellent resistance to breakage, making it a high-performance, long-life spark plug capable of stable combustion even in high-compression ratio engines.
1
5
Share

Where is the coolant temperature sensor located on a Honda 2.4 engine?

Honda 2.4 engine's coolant temperature sensor is located on the radiator, positioned below the radiator's electric fan. It is situated next to the transmission cooling pipe. Composition of the coolant temperature sensor: The coolant temperature and level sensor consists of a thermostat section and a water level control section. It is also accompanied by a pressure reduction device in front of the electric valve and a rotary muffler heater for heating. Function of the coolant temperature sensor: The coolant temperature sensor converts the coolant temperature into an electrical signal, which is input to the ECU to: Adjust the fuel injection quantity; increase fuel injection during low temperatures. Adjust the ignition timing; advance the ignition timing during low temperatures and retard it during high temperatures to prevent knocking. Influence the idle control valve; during low temperatures, the ECU controls the idle control valve based on the coolant temperature sensor signal to increase idle speed, affecting the EGR valve.
8
1
Share

Where is the jack rod?

There is a raised ridge under the car's sill, running from front to back. Any position along this ridge can serve as a support point. Below is relevant information: 1. Jack: A jack is a lightweight lifting device that uses a rigid lifting component as its working mechanism to lift heavy objects within a small stroke through a top support seat or bottom support claw. Jacks are primarily used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. They are compact, sturdy, flexible, and reliable, and can be carried and operated by a single person. 2. Classification: Jacks can be categorized by structural features into rack jacks, screw jacks, and hydraulic (oil) jacks. Other classifications include separated jacks, horizontal jacks, claw jacks, synchronous jacks, hydraulic jacks, and electric jacks. Commonly used jacks include screw jacks, hydraulic jacks, and electric jacks.
5
4
Share

What is the usage method of an automotive oscilloscope?

The usage method of an automotive oscilloscope is: 1. Select the Y-axis coupling method; 2. Select the X-axis sensitivity; 3. Choose the trigger or synchronization signal source and polarity; 4. Select the scanning speed; 5. Input the measurement signal. Phenomena of incorrect usage of an automotive oscilloscope: 1. No light spot or waveform; 2. Failure to expand in the horizontal direction; 3. No display in the vertical direction; 4. Unstable waveform; 5. Inaccurate voltage readings in the vertical direction; 6. Inaccurate readings in the horizontal direction. Reasons for incorrect usage of an automotive oscilloscope: 1. Power not connected, brightness knob not adjusted properly; 2. Improper adjustment of the level knob; 3. Stability potentiometer not adjusted to place the scanning circuit in the critical state of being ready to trigger; 4. Oscilloscope scanning is in the automatic mode, causing unstable waveforms.
10
4
Share

What is the firing order of a four-cylinder engine?

The firing order of a four-cylinder engine can be either 1-2-4-3 or 1-3-4-2, depending on factors such as the crankshaft structure. Here is some relevant information: 1. Working cycle: The working cycle of a four-stroke gasoline engine consists of four piston strokes, namely the intake stroke, compression stroke, power stroke, and exhaust stroke. Currently, all internal combustion engines used are four-stroke engines. The four strokes refer to one working cycle, where the piston moves up and down four times to complete the intake, compression, power, and exhaust processes. 2. Crankshaft: The crankshaft is an important component in a car engine. Its function is to convert the gas force transmitted by the piston and connecting rod into torque, transforming the linear motion of the piston into rotational motion, which is used to drive the car's transmission system, the engine's valve train, and other auxiliary devices.
18
0
Share

Where is the Tire Pressure Monitoring in the Sylphy?

The tire pressure indicator of the Sylphy can be viewed on the instrument display screen, which directly shows the specific values of all four tires. According to the requirements and regulations of the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.