What documents are needed to take a driver's license test in another city?

Is Repainting the Hood Durable?

Not durable. After the hood is repainted, prolonged use can lead to paint cracking, color fading, and eventual paint peeling. This occurs because the engine generates high temperatures during operation, which can alter the paint on the hood, leading to these issues. Below is additional information: 1. Impact of Hood Repainting: There will be some color discrepancy. During the later stages of vehicle use, the hood may fade in color. In severe cases, the paint may peel off, which can also affect the resale value of the vehicle. The reason is that the vehicle's paint has been resprayed. While driving, it is essential to pay attention to the vehicle's safety. 2. Hood Modifications: The color of the hood can be modified, as well as the hood's air intake system. The hood is a decorative component of the vehicle. Beneath the hood is the engine. The hood is secured with a latch mechanism and can be opened using a switch inside the vehicle. To close it, simply lower it down.

3

4

Share

Why Are All New Baojun RM-5 Cars in Stock?

As a compact MPV model under the New Baojun brand, the New Baojun RM-5 has garnered some attention in the automotive market since its launch. In 2019, the sales performance of this car was quite commendable. However, looking at the sales figures from 2020, the performance of the New Baojun RM-5 has seen a significant decline. This car is equipped with two types of engines: 1. A 1.5L naturally aspirated engine: This engine delivers 99 horsepower and a maximum torque of 143 Nm, with the maximum power output at 5,800 rpm and the maximum torque between 3,400 and 4,400 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is paired with either a 6-speed manual transmission or a CVT. 2. A 1.5L turbocharged engine: This engine produces 147 horsepower and a maximum torque of 250 Nm, achieving maximum power at 5,200 rpm and maximum torque between 2,200 and 3,400 rpm. It also employs multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is matched with either a 6-speed manual transmission or a CVT.

15

5

Share

Why can't the RPM go up?

Engine RPM not increasing may be caused by a dirty throttle position sensor or voltage imbalance leading to electronic throttle failure, resulting in the situation where the speed doesn't increase even when the accelerator is fully pressed. Below is an introduction to engine classifications: 1. Horizontally opposed engine: Also known as an H-type engine, its cylinders are horizontally arranged, giving it a naturally lower center of gravity compared to other engine layouts. Due to this horizontal arrangement, many components cannot be integrated, leading to high manufacturing costs. It is not widely recognized by most automakers. 2. Atkinson engine: It offers slightly higher gasoline combustion efficiency compared to traditional types, but also brings issues such as insufficient low-end torque at low speeds and inadequate power. At high speeds, the piston stroke is relatively long, making RPM increase too slow and acceleration poor. However, this engine is usually paired with an electric motor to cleverly compensate for its shortcomings, making vehicles equipped with this powertrain more fuel-efficient. 3. W18 engine: In 1998, Volkswagen acquired Bugatti to demonstrate its powerful design and manufacturing capabilities. Volkswagen forcibly added a six-cylinder engine to a V12 engine, creating an eighteen-cylinder engine. Combined with other configurations that were considered invincible at the time, it was indeed unparalleled for a while.

19

5

Share

Is Toyota's Transmission CVT or AT?

Toyota vehicles utilize both types of transmissions. The differences between them are as follows: 1. Principle: AT (Automatic Transmission) employs a torque converter, but its automatic torque variation range is limited. Therefore, multiple planetary gear sets are connected in series behind the turbine to enhance efficiency. The hydraulic control system automatically operates the planetary gears in response to engine changes, achieving automatic torque variation. CVT (Continuously Variable Transmission) uses conical pulleys that can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical pulleys move inward and tighten, the steel belt is pushed outward from the center; conversely, it moves inward. This changes the diameter of the pulley driven by the steel belt, altering the gear ratio. 2. Usage: AT does not require a clutch for shifting, has fewer gears with significant changes, and ensures smooth engagement, making it easy to operate. This provides convenience for drivers and comfort for passengers. CVT lacks the traditional gear sets of automatic transmissions, eliminating the shift process and associated jerking sensations. As a result, CVT delivers linear power output, offering an exceptionally smooth driving experience.

11

4

Share

What Causes Water Leakage in Fit Car Doors?

Water leakage in Fit car doors is generally caused by aging window seals or clogged door drainage holes, requiring replacement of the seals or cleaning of the drainage holes. Below is an introduction to the Fit: 1. Exterior: The Fit (FIT) adopts the "Exciting-H-Design" as its overall design concept, featuring Honda's latest family-style front face design "solidwing," where the front grille and headlights are integrated, highlighting sharpness and coolness. The side of the body employs a unique cool blade-style double waistline design, creating an eager-to-move-forward momentum. The tension-filled rear design, paired with LED taillights, presents a high-quality texture. 2. Colors: The third-generation Fit initially offered seven rich body colors: Ocean Blue, Starlight Silver, New Moon Yellow, Ruili Red, Taffeta White, Satin Silver, and Off Black. After the mid-term facelift in 2018, the colors were updated to Ocean Blue, Fresh Green, Taffeta White, Glacier Silver, Sky Blue (exclusive to the Sport series), and Ruili Red.

13

0

Share

How to Wash a Motorcycle?

When washing a motorcycle, pay attention to water ingress in the high-voltage cap, high-voltage coil (ignition coil), electronic igniter, stator, and emergency kill switch. Specific details are as follows: High-voltage cap water ingress: Check if the waterproof sleeve on the high-voltage cap is not installed or lacks elasticity. Replace the waterproof sleeve or wrap it tightly with waterproof tape. High-voltage coil (ignition coil) water ingress: Since the high-voltage wire is screwed onto the coil body and can easily loosen, wrap it tightly with tape. Electronic igniter water ingress: The igniter's socket is prone to corrosion. After cleaning, apply grease or Vaseline to prevent corrosion, then wrap it with tape. Stator water ingress: It is particularly prone to water and dirt ingress. Be cautious when washing the motorcycle. Cover it with a small cloth if possible. During maintenance, blow out dust from the stator (as water mixed with dirt turns into mud), which can make starting difficult. Emergency kill switch: Since water is conductive, the kill wire can easily connect with other circuits, causing difficulty in starting or failure to start.

2

Share

What documents are needed to take a driver's license test in another city?

Is Repainting the Hood Durable?

Why Are All New Baojun RM-5 Cars in Stock?

Why can't the RPM go up?

Is Toyota's Transmission CVT or AT?

What Causes Water Leakage in Fit Car Doors?

How to Wash a Motorcycle?

Can Automatic Transmission Fluid Be Used as Power Steering Fluid?

What is the displacement of the Magotan 330tsi?

What Causes Porsche Idle Body Vibration?

Where is the carbon canister located on the BMW X5?