···
Log in / Register

What documents are needed to replace the vehicle registration certificate?

4 Answers
DiJace
09/05/25 2:17am

Documents required for replacing the vehicle registration certificate include the "Motor Vehicle License Plate Application Form", the original and a copy of the identity proof of the vehicle owner, and the Motor Vehicle Inspection Record Form (processed on-site). The following is an introduction to the relevant information about the replacement: To apply for a replacement of the motor vehicle registration certificate, the vehicle owner should drive the vehicle to the vehicle management office. If the vehicle owner is a natural person applying for the replacement of the "Motor Vehicle Registration Certificate", they must apply in person and cannot delegate the task to someone else. If the vehicle owner cannot apply in person due to reasons such as death, travel abroad, serious illness, disability, or force majeure, they can authorize an agent to apply for the replacement of the motor vehicle registration certificate with relevant proof. The owner can authorize an agent to apply for various motor vehicle registrations and businesses, except for the application to replace the motor vehicle registration certificate. If the vehicle owner is unable to apply for the replacement of the motor vehicle registration certificate due to death, travel abroad, serious illness, disability, or force majeure, they can authorize an agent to apply for the replacement certificate on their behalf with the relevant documents.

Was this review help?
3
2
Share
MacKatherine
09/17/25 3:01am

Last time I went to reapply for the vehicle registration certificate, I brought the original and photocopy of my ID card, as well as the duplicate of the vehicle's license. The staff at the vehicle management office needed to verify the VIN or license plate number, so it's best to note down this information or look it up in advance. Additionally, you need to fill out an application form, which is provided on-site but can be downloaded and filled out ahead of time to save time. Bring a few dozen yuan in cash or a card to cover the fee. The whole process takes about an hour, and queuing is common, so it's advisable to go early on a weekday to avoid peak times. After obtaining the replacement, check that the information on the new certificate is correct to avoid future hassles.

Was this review help?
10
4
Share
Expand All
DeLeila
10/31/25 3:32am

In daily work, people often ask about the replacement of vehicle registration certificates. Generally, you need to bring the owner's ID card and the vehicle's license. If the original is lost, a copy will suffice. You also need to fill out an application form, and don't forget the license plate number or VIN for verification. The fee is not expensive, and both cash and QR code payments are accepted. Related tips: Before applying for a replacement, check the requirements of the local DMV to avoid a wasted trip. Some places may require additional documents, such as proof of ownership.

Was this review help?
20
2
Share
Expand All
OmarAnn
12/14/25 3:40am

Simply put, just get it done at the DMV. Bringing my ID card, vehicle license, and license plate number information is enough. Fill out the application form on-site, pay a small fee, and receive the new certificate. The whole process can be completed in as fast as 20 minutes, provided all the required documents are ready. Relevant details: Keep the copy safe, so you won't lose it next time.

Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Remove the Rear Tail Light of Hanteng X7?

The method for removing the rear tail light of Hanteng X7: 1. Open the trunk and first remove the inner lining cotton on one side of the rear tail light. Use a small flat-head screwdriver to pry open the clips of the inner lining cotton and pull it down. Note that the prying action should be slow to avoid damaging the plastic clips. 2. There are a total of three nuts fixing the rear tail light. Take out the small ratchet and fit it with an 8mm socket, then remove the three fixing nuts one by one. 3. Unplug the tail light wiring harness connector. If it is difficult to unplug, gently pry it with a small flat-head screwdriver. 4. Hold both sides of the rear tail light with both hands and gently pull outward to remove the rear tail light. The Hanteng X7 is a compact SUV equipped with a 1.5T turbocharged engine, with a maximum power of 115kW. The car's dimensions are 4671mm in length, 1902mm in width, and 1697mm in height, with a wheelbase of 2810mm. The body structure is a 5-door, 5-seater.
10
0
Share

What should be paid attention to when reversing into the garage?

Precautions for reversing into the garage: 1. There is a key point when reversing into the garage, which is to keep the body 30 centimeters away from the garage corner. 2. During the reversing process, step on the clutch properly and maintain a steady speed. 3. Turn the steering wheel to the maximum as early as possible, not too late. 4. The car body must be fully inside the garage. 5. After the car body is in the garage, pay attention to the rearview mirrors on both sides to adjust the body position. Turn the steering wheel towards the side where the rear is wider. Introduction to reversing into the garage: 1. Reversing into the garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the car in a confined space. Reversing into the garage is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while moving. 2. There is a time limit for reversing into the garage during the test, which is 210 seconds.
7
1
Share

How to Set One-Touch Up/Down for Mistra?

Activation method for Hyundai Mistra's one-touch window control: Some models require manual activation. For the window switch on the armrest, first start the vehicle. Press and hold the button down for 5 seconds, then pull it up for 5 seconds. The system will complete recording and successfully activate. Below are instructions about Hyundai Mistra's one-touch window function: 1. Opening windows (one-touch down) a) Press the button to the first detent and release when reaching desired position. b) Press harder to the second detent - windows will automatically roll down completely. 2. Closing windows (one-touch up) a) Pull the button to first detent (harder pull reaches second), release when windows reach desired position. b) Slightly harder pull to second detent - windows will automatically roll up. Additionally, owners can control windows via key fob: Hold the lock button for ~3 seconds to synchronously raise all windows; hold unlock button for 3 seconds to automatically lower all windows.
2
1
Share

Are Car Cigarette Lighters Universal?

Car cigarette lighters are universal, but it is recommended that car owners choose the appropriate cigarette lighter to avoid abnormalities during use that may affect driving safety. When selecting a cigarette lighter, pay attention to its allowable current to prevent circuit overload during use. The functions of a car cigarette lighter are as follows: 1. Car Charger: While driving, if your phone runs low on battery, you can charge it via the cigarette lighter, providing convenience for passengers. 2. Car Inverter: A car inverter can convert the vehicle's 12V voltage to 220V, allowing passengers to use it, which is particularly convenient for those who enjoy road trips without affecting normal usage. 3. Car Air Pump: Long-distance drivers may need an air pump. If a tire gets punctured halfway, they can directly replace and inflate the inner tube without the hassle of changing to a spare tire, saving time for long-distance drivers. 4. Car Heated Cup: Car heated cups are also quite common in many drivers' vehicles. By connecting to the car cigarette lighter, drivers can have hot water to drink while driving, especially useful in colder weather. 5. Car Dash Cam: A dash cam is an essential safety accessory for driving, and it can also be powered via the cigarette lighter.
1
3
Share

Why Is There a Rattling Sound from the Right Rear Wheel of the Car?

Reasons for the rattling sound from the right rear wheel of the car: 1. If the right rear wheel of the car is severely worn, with bulges or out-of-round conditions on the tire, a rattling sound will occur while driving. In this case, the tire should be repaired or replaced promptly to avoid safety hazards. 2. If the brake pads on the right rear wheel are severely worn, they will produce abnormal noises due to friction. 3. Damage to the right rear shock absorber of the car, mainly including damage to the plane bearing, ball joint, or spring. 4. If there are foreign objects attached to the right rear wheel, abnormal noises will naturally occur while driving.
14
3
Share

How Many Months Beyond the Norm is Considered a Stock Vehicle?

Stock vehicles refer to those that remain unsold in inventory. As for what constitutes a stock vehicle and the duration of stock time, there are no explicit legal definitions or boundaries. Generally, it is considered a stock vehicle if it has been in inventory for 3 to 6 months after leaving the factory. Some may exceed 6 months or even a year, with extreme cases lasting several years. When picking up a vehicle, it is crucial to conduct a thorough inspection to avoid receiving a stock vehicle. Pay attention to the following points during the inspection: 1. Check the production dates of the tires and glass; significant discrepancies may indicate issues. 2. Ensure there are no scratches on the exterior and no stains on the interior. 3. Start the vehicle to check if the lights, electronic instruments, wipers, turn signal levers, dashboard, etc., are functioning properly. 4. Inspect the trunk to confirm the completeness of tools, such as the warning triangle, spare tire, etc.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.