What documents are needed to replace a motor vehicle driving license?

2 Answers
MacJason
07/29/25 4:06am
You only need to bring a 1-inch photo, your ID card and its photocopy, fill out the application form for reissuing a motor vehicle driving license, and then go to the vehicle management office under the jurisdiction of the residential address recorded in your identity document to complete the procedure. The time for replacing a driving license has been shortened from the original 30 working days to 3 days, and generally, you can receive it within 48 hours at the latest. More relevant information is as follows: 1. After the replacement application is successfully processed, you cannot drive a motor vehicle with the original driving license before receiving the new one: If the driving license replacement application is accepted but you cannot obtain the new license on the same day due to time constraints, you are not allowed to drive during this 'gap period' before receiving the new driving license, otherwise, it will be considered as driving without a license. 2. After obtaining the new driving license, the original motor vehicle driving license becomes invalid: If you lose your driving license and obtain a new one, even if you find the original driving license later, the original one will be deemed invalid, and the new driving license will be the valid document.
Was this review help?
2
4
Share
FernandoRose
08/12/25 7:50am
I just had my vehicle license replaced. Just bring the original ID card of the vehicle owner plus a copy. Remember the vehicle needs to be present because the staff will verify the VIN. If you're authorizing someone else to handle it, you'll also need to prepare a power of attorney and bring the authorized person's ID. The green book (vehicle registration certificate) is mandatory - that document is very important. It's safer to prepare three copies of everything, as the print shops near the DMV always have long queues. It's best to make an appointment first on the 12123 APP to avoid a wasted trip. The replacement fee is about 15 yuan in cash, though some locations now accept mobile payments.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

How to Replace a Driver's License in Another Location?

Motor vehicle drivers or their agents can apply for a replacement by bringing the required materials to the vehicle management office. The materials needed for replacing a driver's license are as follows: 1. "Motor Vehicle Driver's License Application Form." 2. The applicant's identity proof. 3. A written statement of the loss of the motor vehicle driver's license. 4. For proxy applications, the agent's identity proof and the "Motor Vehicle Driver's License Application Form" jointly signed by the driver and the agent must be submitted. 5. Two recent one-inch, white-background, color photos without hats. Notes for replacing a driver's license are as follows: 1. After obtaining a new driver's license, the original driver's license becomes invalid and cannot be used anymore. 2. For drivers replacing a damaged license, they cannot drive with the original license during the period before receiving the new one, or they will be considered as driving without a license. 3. During the period when the driver's license is legally seized, detained, or temporarily suspended, the driver is not allowed to apply for a replacement. 4. If a driver has accumulated 12 penalty points within a scoring cycle and needs to replace the license, they must retake the subject one test and pass the exam.
7
5
Share

How to Deal with Shattered Car Glass?

Here are the methods to handle shattered glass: 1. Check how long the car has been purchased and whether it is within the warranty period. Visit the 4S shop to determine if it is a quality issue. 2. Check if there is glass insurance in the car insurance policy. If so, report the incident on-site, and the insurance company will handle it. 3. If none of the above options work, you will have to pay out of pocket. For glass cracks, the extent of the crack must be assessed. Cracks less than 15 cm can be fully repaired, while those longer than 15 cm require expert evaluation to determine if repair is possible. If repair is not feasible, replacement is necessary. The repairable ranges are as follows: 1. Star-shaped damage, bullseye-shaped damage, and cracks. 2. Cracks less than 15 cm can be fully repaired, while those longer than 15 cm require expert evaluation. 3. Immediate repair after damage yields better results. Generally, repairs should be done within two weeks. Beyond this period, the damage may expand, and dust entering the cracked area may leave subtle marks after repair.
3
5
Share

How to Remove Aged Car Stickers?

Aged car stickers can be removed using essential balm, toothpaste, alcohol, a hair dryer, or detergent. The specific methods are as follows: 1. Essential Balm. For stickers with strong adhesive that are difficult to peel off, you can buy a bottle of essential balm from a pharmacy. Then, use a towel or tissue, apply the essential balm to it, and slowly wipe the sticker. This makes it easy to remove without damaging the car's windshield. 2. Toothpaste. If there is a transparent film on the windshield, apply a little toothpaste and slowly rub the sticker area repeatedly. Then, use an oil card to gently scrape off any remaining adhesive. 3. Alcohol. Pour some alcohol onto a towel and wipe the sticker a few times—simple and practical. 4. Hair Dryer. If the transparent film has been on for too long and has aged, making it difficult to peel off, use a household hair dryer to heat it. This makes it easier to remove. 5. Detergent. If you have dish soap or soap at home, you can use them to clean the area. Wet the sticker, wipe it with a towel, and then rinse it off.
6
4
Share

How Long Does It Take for Car Window Tint to Dry?

Car window tint generally takes about 7 days to dry. Maintenance methods after car window tinting: 1. Within seven days after tinting, do not roll down the windows or wash the car with water, and avoid directing air conditioning vents at the glass to prevent the tint from peeling off due to moisture. 2. Due to varying weather conditions and metal materials, the drying time of the tint may differ, ranging from as fast as 2 days to as slow as 7-15 days. Under certain climatic conditions, the tint may appear foggy or have water droplet-like spots. Do not worry, as this is a normal phenomenon and will gradually disappear on its own. 3. If stains appear on the tinted surface, do not use chemical solvents to wipe them off. It is best to clean them with a clean wet towel, water-dampened tissue, or a cotton swab with dishwashing liquid. 4. Within 10 days after tinting, do not use the defroster, as it may cause bubbles to form at the edges of the heating wires, which can be difficult to repair later.
16
5
Share

What are the methods to deal with a small chip in car paint caused by a stone?

Methods to deal with a small chip in car paint caused by a stone: 1. Use a waxing sponge to polish the scratch and then apply gloss restoration wax or brightening wax; 2. Apply toothpaste evenly on a cloth and wipe the scratch; 3. Use water sandpaper dipped in water to remove rust spots and then use a touch-up pen for coloring; 4. Clean the scratched area, polish it, and then spray paint; 5. Apply scratch removal wax. The functions of car paint are: 1. Protect the car from corrosion by various atmospheric agents; 2. Decorate the car; 3. Identify the type of car; 4. Improve the comfort and sealing of the car, preventing noise caused by vibration.
1
3
Share

Which of the three transmissions - AT, dual-clutch, or CVT - is more durable?

AT transmissions are more durable as they connect to the engine via a torque converter, which internally contains transmission fluid, making it a soft connection. The functions of a transmission are: 1. To change the gear ratio to meet the traction needs under different driving conditions; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels when the engine starts, idles, shifts gears, or needs to stop for power output. Maintenance methods for transmissions: 1. Regularly check the fluid level; 2. Avoid skipping gears when upshifting; 3. Do not force the transmission into neutral; 4. Do not shorten the idle warm-up time; 5. Avoid gear grinding when shifting.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.