What documents are needed to obtain the exemption inspection?

1 Answers
StEliana
07/30/25 3:53am
You need to bring the vehicle registration certificate, the owner's ID card, the compulsory traffic insurance policy, and ensure all traffic violations have been settled. With these documents prepared, you can go to the vehicle management office to apply for the exemption inspection label. Before applying, make sure all required materials are ready to avoid wasting time. Additional information is as follows: 1. Vehicle exemption inspection: This refers to exempting eligible vehicles within six years from the on-site inspection process, requiring only a biennial application for the inspection label to be affixed to the vehicle as per regulations. Essentially, it exempts the vehicle from on-site inspection. As long as the vehicle meets the national policy conditions, there's no need for on-site inspection; you can directly apply to the traffic management department for the inspection label. 2. Types of vehicles eligible for exemption inspection: Non-commercial cars and other small and mini vehicles, including vans (excluding vehicles with 7 seats or more) within six years.
Was this review help?
4
1
Share
More Forum Discussions

What are the reasons for the central locking system failure in the Audi A6L?

Here are the main causes and solutions for this issue: 1. The central locking control unit detects that the vehicle doors and trunk are already in the closed state, but one of the doors is still transmitting a signal to unlock, meaning the door handle remains in the open position. The control unit receives this incorrect signal, which affects driving safety, and thus displays a warning on the instrument cluster. First, it is necessary to check whether the doors, trunk, and front hood are properly closed. If everything appears normal, the issue is usually caused by a stuck door handle. Since this is a mechanical fault, the vehicle can be taken to a repair facility for inspection and repair. 2. A component within the central locking system has malfunctioned, such as a door lock or switch in the electrical system. Drive the vehicle to a repair facility and use specialized diagnostic equipment to conduct a comprehensive system check to further identify the exact fault point.
9
1
Share

How to Fold Down the Rear Seats in a Sagitar?

The main methods to fold down the rear seats in a Sagitar are as follows: 1. Fold down the rear seats from inside the car by inserting the seatbelt buckle into the position marked by the square in the diagram, which will release the rear seats. 2. Open the trunk, and slightly below the body groove under the glass, there are two black plastic components, one on each side. Pull the locking mechanism, and the seats will fold down. Additional Information: Besides folding down, the rear seats also allow for headrest adjustment. To adjust the height, pull the headrest upward in the direction of the arrow. To lower it, press button 1 in the diagram while pushing the headrest down. To remove the headrest, pull it up to its maximum position and press the button on the side of the headrest to pull it out.
15
4
Share

Where is the spark plug located?

Spark plugs are installed on the side or top of the engine. In early designs, spark plugs were connected to the distributor via ignition cables, but over the past decade, most car engines have been modified to have ignition coils directly connected to the spark plugs. Working principle of spark plugs: The ground electrode of a spark plug is connected to the metal shell, which is threaded into the engine block through the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode to generate a spark, thereby igniting the air-fuel mixture in the cylinder. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referenced for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
18
5
Share

What is the appropriate tire pressure for a Ford Focus?

The recommended tire pressure for a Ford Focus is between 2.3 and 2.5 bar. There may be slight variations between winter and summer seasons - it's advisable to increase the pressure by approximately 0.2 in winter, while in summer you should adjust to the lower limit of the standard tire pressure value. Vehicle tire pressure is influenced by multiple factors including season, load capacity, measurement environment, road conditions, and tire condition. The Ford Focus is a compact sedan manufactured by Changan Ford, whose product lineup also includes the Ford Edge, Ford Escape, Ford Kuga, Ford EcoSport, Ford Taurus, Ford Mondeo, and Ford Escort. The dimensions of the Ford Focus are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm.
16
5
Share

How to Use the Vehicle's Anti-Skid System?

The ESP anti-skid system is generally enabled by default and automatically activates when the vehicle is started. The primary function of ESP is to control the longitudinal and lateral stability of the vehicle, ensuring it moves according to the driver's intentions. There are several situations where ESP should be temporarily disabled: 1. When the vehicle is stuck in mud or during off-road driving: In cases of being stuck or other off-road scenarios, controlled wheel slip is necessary to aid in freeing the vehicle or climbing. Here, ESP's tendency to prevent wheel slip can be counterproductive. Therefore, during extreme off-roading or when stuck, ESP should be turned off to facilitate escape. 2. When encountering wheel slip while climbing on snowy or rainy days: On snowy or wet surfaces, especially during uphill starts, wheels are prone to slipping. The system may detect this slip and limit engine output, with ESP intervention proving unhelpful. Thus, it's advisable to disable ESP before attempting such maneuvers. 3. When snow chains are installed on the tires: Snow chains alter the wheel's outer diameter, which can interfere with the data from certain sensors in the ESP system, leading to inaccurate signals and affecting ESP's normal operation. 4. During aggressive driving or drifting: While drifting, wheels are in a state of slip most of the time. ESP would intervene to limit this slip, making it difficult to perform drift maneuvers.
5
2
Share

What grade of gasoline should the Hongqi HS5 use?

The Hongqi HS5 should use 95-octane gasoline to meet the stability requirements of its engine during operation. The Hongqi HS5 is a mid-size SUV under FAW Hongqi, which also offers models such as the Hongqi H7, Hongqi L5, Hongqi H5, Hongqi HS7, Hongqi EHS3, Hongqi H9, and Hongqi EHS9. Taking the 2019 Hongqi HS5 as an example, its body dimensions are 4760mm in length, 1907mm in width, and 1700mm in height, with a wheelbase of 2870mm. The vehicle features a MacPherson strut front suspension and a multi-link independent rear suspension.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.