What Documents Are Needed for Vehicle Annual Inspection?

1 Answers
LeAdelyn
07/29/25 2:10am
Documents required for vehicle annual inspection include: 1. Original vehicle license and road bridge card; 2. Copy of compulsory traffic insurance; 3. First black copy of road bridge ticket; 4. Copy of owner's ID card. Annual inspection refers to the safety inspection conducted annually or biennially for vehicles, covering comprehensive checks including horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. Annual inspection process: 1. Drive the vehicle to the inspection station entrance and wait for inspection; 2. Hand over the vehicle to the inspector for online inspection and wait for pickup; 3. After inspection, the staff will issue an inspection sheet, payment receipt, and bind the copy of the insurance policy; 4. Pay the inspection fee at the service hall; 5. Submit the documents to the staff, and after 5 minutes, you can receive the motor vehicle inspection compliance mark and have the auxiliary vehicle license stamped; 6. Receive the environmental protection mark.
Was this review help?
10
2
Share
More Forum Discussions

How to Operate Starting and Stopping at Traffic Lights?

Gently press the brake pedal, fully depress the clutch, then slowly press the brake pedal again. Once the brake is fully engaged, shift gears into first. Release the clutch, then release the brake. Gradually release the clutch while gently pressing the accelerator, then release the accelerator, depress the clutch, shift to second gear, release the clutch and brake, and finally accelerate.
15
1
Share

What are the types of vehicles?

Vehicle types include micro cars, small cars, compact cars, midsize cars, large cars, and luxury cars. Introduction to different vehicle types: Micro cars: Typically refers to vehicles with a wheelbase below 2400mm. Small cars: Usually refers to vehicles with a wheelbase between 2400-2550mm. Compact cars: Generally refers to vehicles with a wheelbase between 2550-2700mm. Midsize cars: Typically refers to vehicles with a wheelbase between 2700-2850mm. Large cars: Usually refers to vehicles with a wheelbase between 2850-3000mm. Luxury cars: Generally refers to vehicles with a wheelbase above 3000mm. Vehicle classification: Class 1 vehicles: Sedans and passenger vehicles with 7 seats (including 7 seats) or less, and trucks with a weight of 2 tons (including 2 tons) or less. Class 2 vehicles: Passenger vehicles with 8 to 19 seats, and trucks with a weight above 2 tons up to 5 tons (including 5 tons). Class 3 vehicles: Passenger vehicles with 20 to 39 seats, trucks with a weight above 5 tons up to 10 tons (including 10 tons), and 20-foot container trucks. Class 4 vehicles: Passenger vehicles with 40 seats (including 40 seats) or more, trucks with a weight above 10 tons up to 15 tons (including 15 tons), and 40-foot container trucks. Class 5 vehicles: Trucks with a weight above 15 tons.
6
3
Share

How to Conduct Annual Inspection for 7-Seater Vehicles with 6-Year Exemption?

Every two years when regular inspection is required, the vehicle owner can directly apply for the inspection label from the traffic management department of the public security authority after submitting the relevant documents. The inspection cycle has been relaxed from once a year to once every two years, meaning only two on-site inspections are needed within 10 years, specifically in the 6th and 8th years. Vehicles require an annual inspection, and those over 15 years old need to be inspected every six months.
13
4
Share

How to Repair Scratches on the Rearview Mirror Plastic Shell?

Use a compound to treat the scratches by wiping in straight lines, then apply wax. Start with coarse wax followed by fine wax, moving in the same direction from the inside out to remove minor scratches. Before using a touch-up pen, shake the paint inside thoroughly. Apply the base coat like nail polish, and you can add a certain amount of thinner to the touch-up pen to ensure smooth spraying. First, wash and dry the car. Apply rust remover to the scratched area, wait for 10-15 minutes, then wipe off the rust remover with a tissue to prevent further rusting in the scratched area.
2
1
Share

What Causes the Car to Indicate Engine Malfunction?

Car indicating engine malfunction is caused by poor gasoline quality and excessive carbon deposits. Below are the detailed explanations: Poor Gasoline Quality: Poor gasoline quality leads to incomplete combustion of the air-fuel mixture in the cylinders, triggering the pollution warning light, and also easily causes carbon deposits. Carbon deposits in the intake tract and on the piston tops can result in poor atomization, leading to incomplete combustion and thus illuminating the pollution warning light. During cold starts, especially when the temperature drops sharply, the pollution warning light may come on due to the ECU's temperature correction issues during startup. However, once the temperature stabilizes at a certain level without fluctuations, the situation will become relatively stable. Excessive Carbon Deposits: Excessive carbon deposits can make ignition difficult, causing the ignition coil to reverse breakdown and fail, leading to poor ignition and incomplete combustion, which triggers the pollution warning light. A distinctive feature of this phenomenon is that when the ignition coil fails, the engine will continuously experience severe shaking. If the severe shaking is not continuous, the issue can essentially be ruled out as an ignition coil problem.
2
5
Share

What is the original engine oil for the Baojun 510?

The original engine oil model for the Baojun 510 is SM/GF-45w-30. The relevant introduction of engine oil is as follows: Composition of engine oil: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining the basic properties of the lubricating oil, while additives are an important part of the lubricating oil. Types of engine oil: The winter oil grades in the SAE lubricating oil viscosity classification are: 0W, 5W, 10W, 15W, etc. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity and the lower the applicable minimum temperature. The summer oil grades in the SAE lubricating oil viscosity classification are: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the applicable maximum temperature.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.