What documents are needed for maintenance at a 4S shop?

2 Answers
Reid
09/02/25 4:52am
For maintenance at a 4S shop, you need to bring the maintenance manual, vehicle license, etc. Car maintenance items: Cleaning, inspection, replenishment, lubrication, fastening, adjustment, replacement, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. Car maintenance cycle: The car maintenance cycle is mostly 5,000 kilometers or half a year. However, if you often drive in harsh environments, the maintenance cycle should be shortened accordingly. Conversely, if you do not drive frequently or the road conditions are good, the maintenance cycle can be appropriately extended.
Was this review help?
5
2
Share
LaMalia
09/14/25 7:04am
Every time I take my car to the 4S shop for maintenance, I prepare the necessary documents in advance, including my ID card and vehicle license. This is mandatory because the 4S shop needs to verify the owner's identity and vehicle information to prevent errors. If the car is still under warranty, don’t forget to bring the warranty manual or maintenance logbook, which details previous services and helps technicians quickly diagnose issues. I usually make an appointment in advance and bring the appointment confirmation to save time. Additionally, it's advisable to check the car's condition, such as tire wear or brake noises, and note them down on your phone for easy feedback to the mechanic. Car maintenance isn’t just about changing the oil—a comprehensive inspection enhances driving safety. These small preparations make the whole process much smoother and ensure peace of mind on the way home.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What are the seven-seater cars from Chery?

Chery's seven-seater models include the Tiggo 8, a mid-size SUV available in both five-seat and seven-seat configurations. In terms of features, the Tiggo 8 is equipped with a brake assist system, electronic stability control, auto hold, hill start assist, and hill descent control. For suspension, the front suspension is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. Transmission options include a 6-speed manual, 6-speed dual-clutch, and 7-speed dual-clutch. The Tiggo 8 is an SUV under the Tiggo series, with dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, and a wheelbase of 2710mm.
4
0
Share

Is the Mercedes-Benz E a C-Class car?

The Mercedes-Benz E is a C-Class car, which is a mid-to-large size luxury vehicle. The classification standards for cars are based on body dimensions and wheelbase length. A-Class cars: These are compact cars, with even smaller ones referred to as subcompact cars, or A0-Class cars. Their wheelbase typically ranges from 2.4 to 2.6 meters, and most have engine displacements between 1.0 to 1.5 liters. B-Class cars: These are mid-size cars, with wheelbases around 2.7 to 2.9 meters and engine displacements between 1.4 to 2.5 liters. C-Class cars: These are mid-to-large size cars, with wheelbases around 3 meters and engine displacements between 2.0 to 3.0 liters. D-Class cars: These are full-size cars, with wheelbases varying from 3.1 to 3.6 meters and engine displacements ranging from 2.0 to 6.6 liters.
6
2
Share

What are the dimensions of the XC60 trunk?

The dimensions of the XC60 trunk are 1755mm in length, 1295mm in width, and 750mm in height. The XC60 seats come in various colors and materials, with the three rear seats divided in a 40:20:40 ratio. These seats can be folded down, creating a completely flat surface with the trunk, making it highly flexible. The overall dimensions of the XC60 are 4688mm in length, 1902mm in width, and 1658mm in height, with a wheelbase of 2865mm. Its engine delivers a maximum horsepower of 190Ps, a maximum power of 140kW, and a maximum torque of 300Nm.
14
3
Share

At what oil pressure level will the warning light activate?

The warning light will activate when the oil pressure falls below the min mark. Typically, a car's engine is equipped with an oil dipstick that has max and min marks. A sensor installed on the oil pan detects the oil level, and when the oil level drops below the min mark, the vehicle will display a warning light. Insufficient oil pressure can have several effects on the car: 1. Inadequate lubrication, which increases wear and damages the engine; 2. Low oil level may cause abnormal noises; 3. Increased oil consumption, possibly requiring oil replenishment before the scheduled oil change interval; 4. The oil level warning light may illuminate during driving.
18
0
Share

Can the temporary license plate still be used after the official license plate is issued?

After the official license plate is issued, the temporary license plate cannot be used. Once the license plate is received, the temporary license plate becomes invalid. Even if the temporary license plate has not expired, it will become invalid once the official license plate is obtained. For newly licensed vehicles, after receiving the new license plate, a few car owners may not install it. However, it is mandatory to install the new license plate at the vehicle management office before driving on the road. Driving without installing the license plate is considered a violation of the regulations regarding the installation of license plates. License plates are plates mounted on the front and rear of the vehicle, typically made of aluminum, iron, plastic, or paper, displaying the vehicle's registration number, registration region, and other relevant information. The primary purpose of license plates is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the license plate.
14
0
Share

What is the reason for the engine still making noise after the car is turned off?

The reason for the engine still making noise after the car is turned off is due to an issue with the three-way catalytic converter. The three-way catalytic converter is a purification device in the car's exhaust system that converts harmful substances in the exhaust into carbon dioxide, water, and nitrogen. The operating temperature of the three-way catalytic converter is very high, nearly 1000 degrees Celsius. After the engine is turned off, the metal inside undergoes thermal expansion and contraction, which causes the noise. Turning off the engine is also referred to as extinguishing. When a reactor is operating at a significant reaction rate, if the temperature at the feed inlet is reduced to the lower limit of the multiple steady-state region, the reaction rate suddenly drops significantly, and the reaction basically stops. This phenomenon is called extinguishing, and the corresponding inlet temperature is called the extinction point.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.