What documents are needed for car purchase and registration?

1 Answers
JosieLynn
07/30/25 6:38am
Here are the documents required for car purchase and registration: 1. First, pay the full amount at the 4S store, then the 4S store will deliver the car to you and provide a series of documents, including: purchase invoice, certificate of conformity, triple warranty manual, instruction manual, two keys, etc. Note that all documents must be complete, especially the certificate of conformity. 2. Purchase insurance. Compulsory traffic insurance is mandatory, and although commercial insurance is not compulsory, it is recommended to purchase third-party liability insurance and vehicle damage insurance at the same time. It is recommended to purchase at least 500,000 coverage for third-party liability insurance. When purchasing insurance, the insurance company will collect the vehicle and vessel usage tax on behalf of the government. After purchasing insurance, it is recommended to apply for a temporary license plate at the same time to facilitate driving to the registration office. 3. Pay the vehicle purchase tax. There are fixed locations for paying the vehicle purchase tax in each area. Bring the certificate of conformity, invoice, owner's ID card, etc. to pay the tax. After paying the tax, you will receive a tax payment certificate for the vehicle purchase tax, one copy of which must be submitted to the vehicle management office during registration. 4. Go to the vehicle management office for registration. Registration requires driving the car for inspection, including the appearance, chassis number, and engine number. That's why it was mentioned earlier that a temporary license plate is needed after purchasing insurance. Otherwise, the vehicle cannot be moved without a temporary license plate.
Was this review help?
8
5
Share
More Forum Discussions

What Causes the Buzzing Resonance at 3000 RPM in an Engine?

Engine buzzing resonance at 3000 RPM is caused by: 1. Engine knocking or misfiring; 2. Engine backfire malfunction; 3. Incorrect engine timing adjustment; 4. Failure to change engine oil; 5. Loose plastic components in the engine compartment; 6. Abnormal noises from engine belts, valves, or bearings; 7. Starter or water pump failure; 8. Faulty engine mounts; 9. Loose engine underbody shield. Solutions for engine buzzing resonance at 3000 RPM include: 1. Using substandard fuel - refill with qualified gasoline; 2. Disassembling the engine to clean carbon deposits; 3. Replacing with qualified engine oil.
1
2
Share

Can ETC be removed?

ETC can be removed after installation. However, if you remove the ETC device by yourself, it will become invalid because the ETC device has an anti-tamper function. There is a small switch on the back of the ETC electronic tag, which will automatically turn off once it is detached from the windshield. Therefore, you must bring your vehicle's registration certificate to the ETC service provider for reactivation. ETC charging principle: There will be one or more ETC lanes on the highway. Through the dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the computer network technology is used to settle accounts with the bank, achieving the purpose of paying tolls without stopping at the toll station. All of this is based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The efficiency of ETC lanes can theoretically increase by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate of road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate of passenger vehicles, efforts will also be made to promote the use of ETC by trucks in the future. There will be exploration of deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications. Precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rearward angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag requires power, but generally, it does not need to be charged or have its battery replaced because there is a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper rod connected to a switch. Once the electronic tag is installed, the windshield will press the anti-tamper rod in. If it is removed arbitrarily, the anti-tamper rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle's device information cannot be read, resulting in a failed charge. When using a debit card bound to ETC, insufficient balance will also cause the charge to fail.
1
4
Share

What transmission does the BYD Song MAX use?

BYD Song MAX uses a 6-speed dual-clutch transmission, equipped with a 1.5T L4 turbocharged engine. The maximum horsepower is 160 PS, the maximum power is 118 kW, the maximum power speed is 5200 rpm, the maximum torque is 245 Nm, and the maximum torque speed ranges from 1600 to 4000 rpm. The BYD Song MAX is an MPV model with body dimensions of 4710 mm in length, 1810 mm in width, and 1680 mm in height. It has a wheelbase of 2785 mm, a fuel tank capacity of 60 liters, a front track of 1540 mm, and a rear track of 1530 mm.
14
4
Share

What is the classification method for sedan levels?

The classification method for sedan levels is based on wheelbase and engine displacement, which are as follows: 1. A-segment cars, with a wheelbase of 2000 to 2200mm and an engine displacement of less than 1 liter, represented by models such as Chery QQ, BYD F0, and Suzuki Alto; 2. B-segment cars, with a wheelbase of 2450 to 2600mm and an engine displacement of 1.6 to 2.4 liters, represented by models such as Honda Accord, BMW 320, and Volkswagen Magotan; 3. C-segment cars, with a wheelbase of 2600 to 2800mm and an engine displacement of 2.3 to 3.0 liters; 4. D-segment cars, with a wheelbase of more than 2800mm and an engine displacement of 3.0 liters, represented by models such as BMW 520, Mercedes-Benz E200, and Toyota Crown.
18
4
Share

Can a Cracked Front Bumper Be Repaired?

A cracked front bumper can be repaired. The repair method for a cracked front bumper is as follows: 1. Remove the bumper; 2. Align the crack on the bumper and secure it with transparent tape; 3. Plug in the soldering iron, flip the bumper over, inspect the internal crack, and once the soldering iron reaches the appropriate temperature, use it to melt and fix the internal crack along its direction; 4. Weld the crack with a PP welding rod using a plastic welding gun; 5. Remove the transparent tape used for the bumper crack, run the soldering iron along the crack again, sand the area with 400-grit coarse sandpaper to smooth it out, apply putty, and let it dry; 6. Sand with wet coarse sandpaper, then use fine sandpaper to achieve a smooth finish, rinse with water, and dry with a clean cloth; 7. After painting, reinstall the front bumper panel.
2
3
Share

What is the method for removing the low beam headlight of the Lavida?

Lavida low beam headlight removal method is: 1. Open the front hood; 2. Remove the fixing screws of the low beam headlight guard plate; 3. Remove the fixing screws between the low beam headlight and the radiator frame; 4. Remove the fixing screws between the low beam headlight and the front bumper guide channel, then grasp the edge of the low beam headlight with your hand to pull it out. Taking the 2019 Lavida as an example, it is equipped with a 1.2T inline 4-cylinder turbocharged engine, with a maximum horsepower of 116ps, maximum torque of 200Nm, and maximum power of 85kW. The 2021 Lavida has body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.