What documents and procedures are required for a driver's license renewal medical examination?

2 Answers
Doris
07/25/25 4:18am
Original old driver's license of the motor vehicle driver and the original ID card with a copy; three one-inch color photos; health certificate. Go to the vehicle management office to collect the driver's license and fill out the driver's license application form, which should be submitted at the vehicle management office. The driver should submit the original motor vehicle driver's license, the motor vehicle driver's license application form, and the photos to the vehicle management office where the driver's license was issued. The vehicle management office will process the renewal procedure within one working day after approval.
Was this review help?
16
3
Share
Walter
08/10/25 5:21pm
I just renewed my driver's license last week, and the whole process was quite straightforward. For the renewal, you need to bring your original ID card, the expiring driver's license booklet, and two one-inch white background photos. The medical check-up is crucial—you must go to a designated hospital or use a self-service medical check-up machine at the vehicle management office. They mainly test your vision (remember to wear glasses if you're nearsighted) and color recognition. The medical check-up spot I went to was quite crowded, so I recommend going early to queue. The process involves getting the medical report first, then filling out an application form at the vehicle management office counter, paying a 10-yuan fee, and receiving your new license on the spot. A reminder: you can apply for renewal 90 days before your license expires—don’t wait until it’s expired, or you’ll have to go through extra procedures. If you’re familiar with the process, it can be done in about an hour. Remember to wear dark-colored clothes for the photo.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How many engine displacements does the Honda Avancier have?

Honda Avancier has one engine displacement. Relevant information is as follows: 1. The displacement of Honda Avancier is 1.5 liters. The Avancier is equipped with only one engine, which is a 1.5-liter turbocharged engine. The engine code for the Honda Avancier is I15bd. This engine has a maximum power of 142 kW, a maximum torque of 243 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed ranging from 2000 to 5000 rpm. 2. The Honda Avancier is equipped with a matte genuine leather seat system. Among Honda brand models, it features front seat rapid heating and ventilation, a 12-way power-adjustable driver's seat, and independently controlled air conditioning for the driver, front passenger, and rear seats. Additionally, it innovatively includes air vents on the vehicle's B-pillar.
9
1
Share

Is the Spare Tire the Same as the Original Tire?

Only full-size spare tires have the exact same specifications and size as the original tires, while non-full-size spare tires and run-flat tires differ from the original tires. Below are precautions for using different types of spare tires: 1. Full-size spare tires have identical specifications and size to the other four tires on the vehicle. They can replace any temporarily or permanently unusable tire. 2. Non-full-size spare tires have slightly smaller diameter and width compared to the original tires. They can only be used as a temporary replacement and must be installed on non-driving wheels. The maximum speed should not exceed 80 km/h. Below is extended information on storing car spare tires: 1. Regularly inspect the spare tire: Owners should check the spare tire during routine maintenance or before long trips. Key checks include tire pressure, wear, and cracks. If the tread wear reaches the wear indicator line, the spare tire should be replaced immediately. If minor cracks appear on the sidewall, prolonged use should be avoided to prevent blowouts. 2. Keep oil products away from the spare tire: Tires are primarily made of rubber, which can degrade when exposed to oil. If oil contaminates the spare tire, it significantly reduces its lifespan. Any oil stains should be cleaned promptly with detergent. 3. Monitor the spare tire's lifespan: As a rubber product, spare tires age over time. Prolonged storage can lead to severe aging or even failure. Typically, tires have an aging period of about 4 years, after which the spare tire should be replaced.
14
0
Share

What is the oil specification for the Excelle?

Buick Excelle uses the GM genuine oil 5W-30SL. Notes for use: 1. Each oil change for the Buick Excelle requires 3.75L, and it should be changed every 3 months or 5,000 kilometers. 2. The engine oil filler port is located on the left side of the engine. When normally changing the oil, lubricate the filler cap with oil from the dipstick before smoothly tightening it in the correct direction. Additional information: The oil level should be filled up to the upper mark on the dipstick for optimal performance. Overfilling can create excessive resistance for the engine, which may increase fuel consumption.
19
4
Share

What to Do When Windshield Wipers Don't Clean Properly?

Here are the explanations for windshield wipers not cleaning properly: 1. The reason why windshield wipers don't clean properly is that there are stains on the glass that haven't been cleaned, which can cause the wipers to develop burrs over time; 2. There are two methods to deal with stains: sandpaper polishing the wipers and using toothpaste. Here are some extended tips for maintaining windshield wipers: 1. Keep the wipers in the lowest position when not in use: When not using the wipers, place them in the lowest position and pay attention to cleaning the lower part of the wipers to prevent foreign objects from causing long-term pressure on the wiper blades, leading to deformation; 2. It's best to use wipers only for cleaning rainwater: Avoid using wipers to clean dust or stains on the windshield under normal circumstances. The primary function of wipers is to clean rainwater, and unknown stains on the glass may cause the rubber blade edges to age or wear, reducing the wipers' lifespan; 3. Clean once every one or two weeks: Lift the wiper blades and separate them from the windshield to check for any damage. Replace them promptly if damaged. If there's no damage, soak the wiper blades in water and polish them several times with water sandpaper, then rinse with clean water.
2
0
Share

How to Charge a Car Battery When It's Dead?

Methods for charging a dead car battery are as follows: 1. Self-recovery of power. When the engine is running, the alternator not only supplies power to the entire vehicle but also charges the battery. However, due to power limitations, during long-distance night driving, the alternator's output is usually only sufficient for lighting needs. Therefore, try to avoid using electrical appliances other than lights during night driving. 2. Use a portable charger to charge the battery. Charging a car starter battery typically requires 20 hours. After charging, perform a battery test to check if it has accepted the charge. A fully charged 12V battery should have an open-circuit voltage of around 13.0V. If the voltage meets this standard, proceed to test the capacity or attempt to start the engine. If successful, the battery is functioning normally; if not, the battery may need replacement.
7
3
Share

Should You Press the Clutch or Brake First When Stopping at an Intersection?

When coming to a stop, you should first press the clutch, then the brake pedal, or you can press both the clutch and brake pedals simultaneously. If you don't press the clutch pedal, the engine will stall. Pressing the clutch pedal disconnects the engine from the transmission. Precautions for stopping at an intersection: Slow down and downshift in advance. When approaching a traffic light intersection, reduce speed early and shift down from fourth gear to third, then from third to second. Choose the appropriate lane in advance based on the directional arrows on the road. Intersections generally have left-turn, straight, and right-turn lanes. Select the corresponding lane in advance according to your destination. About 50 to 100 meters from the stop line or the vehicle in front, press the clutch and use the brake to control the car's speed. Gradually bring the car to a slow stop based on the distance from the stop line or the vehicle ahead. If you notice the car is about to stop while still far away, gently release the brake slightly to allow the car to move forward slowly until the front edge of the car just covers the stop line or aligns with the lower edge of the front vehicle's tires. Then press the brake fully to bring the car to a complete stop.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.