···
Log in / Register

What do you need to do for the third subject station duty?

3 Answers
DiWilliam
09/08/25 7:14am
During station duty, you can observe various traffic phenomena, allowing new students to personally experience the situations that may occur while driving. When there is a traffic violation, you can also see how the police impose penalties, learning lessons from it. The following is the extended content: Reason: Students who are taking the driving test for the first time or adding a driving license need to participate in 2 hours of traffic practice in the actual traffic environment through on-site education, personal experience, and illegal persuasion. Legal basis: It is required that students under the age of 40 from each driving school must participate in a duty activity, lasting 1 to 2 hours per day, mainly at urban intersections and bus stops.
Was this review help?
3
2
Share
Sienna
09/20/25 5:44am
During the third driving test station, I think the most common mistake beginners make is being impatient and lacking planning. The entire process involves the examiner instructing you to pull over at a designated spot. First, you must slow down in advance—don’t wait until the last moment to brake suddenly. Turning on the right turn signal is a crucial step, while also scanning the left and right mirrors and blind spots to ensure no cars are approaching from behind for safety. When pulling over, turn the steering wheel slowly, find a reference point to align with the curb or markings, and maintain a standard distance of about 30 cm. After stopping, firmly engage the handbrake, shift to neutral, and turn off the signal—these actions should be smooth and not sluggish. I remember failing my first attempt because I forgot to check the blind spot. I recommend practicing more in open spaces by simulating markings and getting familiar with your car’s reference points, such as the width in the rearview mirror. Stay relaxed during the test—treat it like routine training, don’t overthink the outcome, and just follow the steps one by one.
Was this review help?
20
0
Share
Expand All
OGabriella
11/03/25 6:05am
From an experienced driver's perspective, the roadside stop section is actually a great opportunity to demonstrate smooth operation. The key is to steadily park the vehicle at the designated spot. Remember to activate your turn signal several seconds in advance - don't wait until you're about to stop. Don't slack off when checking mirrors; thoroughly observe both sides. When pulling over, use your side mirror or an outside reference point to align with the curb and approach slowly, stopping about a fist's width away. Then simply engage the parking brake, shift to neutral, and turn off lights. Don't underestimate the importance of sequence - examiners are very particular about details like forgetting to cancel turn signals or inadequate observation, which will cost points. Practice multiple times to develop muscle memory, like rehearsing curb alignment in empty parking spaces. I passed on my first try thanks to advance simulation - when you nail the positioning, even the examiner will compliment your crisp execution. The crucial point is to stay relaxed; treat it like normal driving and maintain natural fluidity to pass smoothly.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What brand of transmission is used in the Cadillac XT5?

The Cadillac XT5 is equipped with an 8-speed automatic transmission from the Aisin brand. About the gears of the transmission: The more gears a car transmission has, the better. With more gears, the gear ratios are closer. This results in smoother gear shifts, higher transmission efficiency, and some fuel savings. However, this is only theoretical. In reality, it mainly depends on how the manufacturer tunes the transmission (professionally known as shift logic). AT Transmission: In the field of civilian vehicles, the AT transmission is considered the most comprehensive in terms of overall strength, which refers to shift smoothness and power transmission efficiency. Although the AT transmission has the strongest overall performance, it also comes with the highest cost.
3
5
Share

Do I Need to Press the Electronic Handbrake After Turning Off the Camry?

When parking after turning off the engine, first shift the gear lever to the P position, then pull up the electronic handbrake. When you hear the sound of the motor working, it indicates that the braking is effective. This provides greater braking force to the vehicle, making parking safer and preventing rollback. The usage method of the electronic handbrake is as follows: Press the HOLD button: The automatic parking function switch is located behind the electronic brake switch, labeled with the HOLD button. Press this switch, and once the indicator light on the switch turns on, this function will automatically activate. Automatic parking function self-braking: After this function is enabled, when waiting at traffic lights or on slopes, there is no need to manually engage the electronic brake. The automatic parking function will self-brake, preventing the vehicle from rolling when the gear is in D or on slopes.
3
1
Share

What is the fuel consumption of the Audi A6?

The fuel consumption of the Audi A6 is 9.64L/100km. Here are some methods to reduce fuel consumption: Start smoothly: Accelerate steadily and moderately to reduce engine warm-up time and improve fuel efficiency. Avoid frequent hard braking: Always observe the road ahead while driving. Prepare for braking in advance when encountering situations, and avoid hard braking unless absolutely necessary. If there is an accident ahead, try to decelerate early instead of accelerating further. Release the throttle and use the vehicle's inertia for smooth braking. Check the air conditioning cooling system: When the air conditioning cooling effect is poor, some drivers may increase the fan speed or lower the temperature to achieve better cooling. However, if the air conditioning cooling system malfunctions, it can significantly increase the vehicle's fuel consumption. Therefore, it is important to regularly check the air conditioning cooling system and have it maintained or repaired by professionals. Avoid prolonged idling: Prolonged idling leads to incomplete combustion in the engine, which can result in carbon buildup and engine wear over time. Additionally, incomplete combustion increases carbon dioxide emissions, polluting the environment.
16
0
Share

What is the wading depth of the Transit?

The wading depth of the Transit is 60cm. Introduction to the Transit: As the first model of European Ford to enter the Chinese market, the Classic Transit is widely used in logistics transportation, passenger commuting, and as a base vehicle for modifications to meet the needs of various industries. It offers a maximum loading space of up to 11.5 cubic meters and is available in 3-17 seat configurations. Classic series of the Transit: The Transit currently has two generations of models: the "Classic Transit" and the "New Generation Transit". It features flexible and diverse body layouts, including long wheelbase, short wheelbase, and extended wheelbase options, with 3-17 seat configurations to meet various needs. Additionally, it offers both diesel and gasoline engine options, making it suitable for a wide range of applications such as business reception, passenger commuting, and logistics transportation. It also boasts strong customization capabilities for modified vehicles, catering to diverse industry needs.
6
5
Share

What is the horsepower of the Lamborghini Huracan Evo?

Lamborghini Huracan Evo's engine delivers 640 horsepower. Body dimensions: The Lamborghini Huracan Evo is a sports car under the Lamborghini brand. This model has a wheelbase of 2620 millimeters (mm), with length, width, and height measuring 4520 mm, 1933 mm, and 1165 mm respectively. It is a two-door, two-seater sports car. Powertrain: The Lamborghini Huracan Evo is equipped with a 5.2-liter V10 naturally aspirated engine. This engine produces a maximum power of 470 kW and a maximum torque of 600 Nm. The maximum power is achieved at 8000 rpm, and the maximum torque is available at 6500 rpm. The engine features hybrid injection technology and uses an aluminum alloy cylinder head and block. Suspension: The Lamborghini Huracan Evo uses double-wishbone independent suspension for both the front and rear axles.
6
4
Share

What are the differences between the Camry 2.5G and 2.5S?

The differences between the Camry 2.5G and 2.5S are as follows: Different exterior: The front fascia has distinct differences. The Camry Sport 2.5S XSE edition features an exclusive XSE sporty design with a black emblem, making the car appear more aggressive and sporty compared to the Camry 2.5G. Its front bumper has a cool sporty design, paired with a sharp honeycomb mesh grille and hawk-eye smoked 3D LED headlights, giving the front a more commanding presence. The rear aerodynamic bumper, dual quad exhaust pipes, and winged sport spoiler, along with 18-inch dynamic two-tone alloy wheels, further enhance the sporty appeal. Different interior: The Camry 2.5S features a multifunction steering wheel with paddle shifters and interior trim with checkered metal texture accents, along with SPORTIVO sport floor mats, creating a more sporty atmosphere. However, in terms of seating, the Camry 2.5G's front passenger seat offers 4-way power adjustment, while the 2.5S has manual adjustment.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.