What Do You Learn on the First Day of Driving School Subject 2?

1 Answers
VanRachel
07/29/25 4:25pm
On the first day of driving school Subject 2, you learn: steering wheel control, gear shifting, releasing the clutch, and driving straight. The detailed examination subjects are as follows: (1) Subject 1 (Theory Questions): Road traffic safety laws, regulations, and related knowledge examination subjects. The structure of the examination question bank and basic question types are formulated by the Ministry of Public Security, and provincial public security traffic management departments establish the examination question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. (2) Subject 2 (Field): Field driving skills examination subjects, including: reversing into a parking space, stopping and starting on a slope, right-angle turns, curve driving, and parallel parking. (3) Subject 3 (Road): Road driving skills examination subjects, basic examination items include: preparation before starting (walk around the car counterclockwise, fasten seat belt, turn on left turn signal, shift gear, release handbrake, honk the horn), starting, driving straight, changing lanes, passing intersections, pulling over, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. (4) Subject 4 (Civilized Driving): Safe and civilized driving knowledge, examination items: knowledge related to safe and civilized driving.
Was this review help?
2
0
Share
More Forum Discussions

How to Solve the Engine Malfunction Indicator Light in Eado?

If the engine malfunction indicator light in your Eado is on, you can follow these steps to address the issue: First, check whether the engine is running normally and if there are any issues such as shaking or emitting black smoke. If these symptoms are present, avoid restarting the engine. Specifically, if the red light is on, do not restart the engine under any circumstances. If the engine can be started, turn it off and wait for 5-10 minutes. Then, without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the malfunction indicator light on the dashboard turns off. If the light remains on, visit a service center as soon as possible to diagnose the issue. The service center can use a portable diagnostic tool to read the fault code, identify the problem, and perform targeted repairs. The engine malfunction indicator light resembles a water tap icon and comes in two colors: yellow and red. A yellow light indicates a warning, while a red light means prohibition. When the yellow light is on, it means some system parameters may be outside the set range, and the car can still be driven, but certain functions may be limited. When the red light is on, the car must be stopped immediately, the engine turned off, and further driving prohibited until the fault is checked. Common causes for the engine malfunction indicator light to turn on include: sensor failure, oil quality issues, poor mixture combustion, turbocharging problems, intake issues, exhaust problems, or anti-theft system malfunctions.
20
4
Share

How to Remove the Fender?

Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper. Remove the three screws at the bottom right of the front bumper cover. Use a Phillips screwdriver and a 7mm socket to remove the three screws on the fender. Pull back the splash shield. Remove the screws at the bottom of the front bumper, then remove the screws connecting the fender and the bumper. Next, remove the four bolts behind the headlight. Disconnect the headlight assembly plug and remove the headlight assembly. Remove the screws connecting the splash shield to the fender, and the fender can then be removed.
8
1
Share

How to Perform Partial Paint Touch-Up on the Hood?

First, press the brake pedal in the vehicle's cabin, then press the one-touch start button to power on the vehicle. Next, press the RES button on the left side of the multifunction steering wheel, and hold down the OK button on the right side of the multifunction steering wheel until you hear a beep, then release. Turn the gear switch to D (Drive) to unlock the anti-theft lock.
12
4
Share

What to Do When the Hood Release Cable Breaks and Won't Open?

First, remove the broken cable. Prepare a new cable and insert it. To replace the old cable with the new one, twist the two cables together, then pull out the other end to draw the new cable in. Tighten the fixing screw of the replaced cable with a screwdriver. Once the fixing screw is adjusted to the proper position, the hood cable replacement is complete.
7
2
Share

What are the penalties for drunk driving of commercial vehicles?

Detention for 15 days, a hefty fine, revocation of the motor vehicle driving license, and prohibition from obtaining a new driving license within five years. Criminal liability shall be pursued in accordance with the law, and the traffic management department of the public security organ shall revoke the motor vehicle driving license, with a lifetime ban on obtaining a new driving license.
7
4
Share

What to Do When Engine Coolant Temperature Is Too High?

Check whether the coolant level in the reservoir is between the maximum and minimum marks. If it is below the lower limit, replenish the coolant. Check in sequence for leaks in the radiator, hoses, water pump, thermostat, hose connections, cylinder head gasket, etc. Use tape or a cloth coated with grease to wrap the leaking area, then secure it tightly with wire.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.