What Do Tire Pressure Monitoring Data Represent?

1 Answers
DanteLee
07/30/25 2:08am
Tire pressure monitoring data represent the air pressure of each tire. The recommended tire pressure should be between 220kPa and 280kPa. Pressures above 300kPa may increase the risk of a blowout, while pressures below 200kPa can lead to abnormal tire wear. Methods to check tire pressure monitoring data include: 1. Using a tire pressure monitor; 2. Detecting tire pressure changes through navigation; 3. Pressing the tire pressure monitoring button in the central control panel area. Tire pressure monitoring automatically and continuously measures tire pressure while driving, alerting the driver to leaks or low pressure to ensure driving safety. The system works by using pressure sensors installed in the tires to measure air pressure, then transmitting this data wirelessly from inside the tire to a central receiver module.
Was this review help?
3
2
Share
More Forum Discussions

How to turn off the air conditioning in the Nissan Qashqai?

To turn off the air conditioning in the Nissan Qashqai, simply switch the fan speed control to OFF. The AC button activates the compressor, which dehumidifies the incoming air. Drying the air reduces humidity inside the cabin, improves defogging efficiency, and prevents fogging. When using the car's air conditioning, ensure all windows are closed tightly, as incomplete closure may affect the cooling and heating functions. The Nissan Qashqai is an urban SUV under Dongfeng Nissan, with dimensions of 4315mm in length, 1783mm in width, and 1606mm in height, and a wheelbase of 2630mm. It is equipped with Nissan's Intelligent Connectivity system, providing features such as intelligent voice control, 24/7 entertainment, full-time navigation, and remote real-time monitoring.
17
4
Share

How to Turn on the Fog Lights on the Tiguan?

Tiguan turns on the fog lights by: first turn the headlight switch to the on position, then pull the switch outward. Pulling it once turns on the front fog lights, and pulling it twice turns on both front and rear fog lights. The prerequisite for turning on the front and rear fog lights is that the parking lights must be on, otherwise the fog lights will not illuminate. Car fog lights are installed on the front and rear of the vehicle, used for road illumination and safety warnings during rainy or foggy weather, improving visibility for the driver and surrounding traffic participants. The Tiguan is a compact car with a length, width, and height of 4506mm, 1809mm, and 1685mm respectively, and a wheelbase of 2684mm. The vehicle comes standard with ESP body stability system, EBD electronic brake-force distribution, and ASR traction control.
18
1
Share

How to Open the Hood of a New Buick?

To open the hood of a new Buick, follow these steps: There is a small black lever at the lower end of the left-side air vent near the driver. Pull the lever up until you hear a click. Then, move to the front of the hood, insert your hand into the raised gap, and locate a small tab at the center of the hood's front edge. Push the tab to the left, and you can lift the hood. Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. Its model lineup includes the Excelle, Verano, Regal, and others. Taking the Verano as an example, it is a mid-size sports sedan under SAIC-GM Buick, with dimensions of 4723mm in length, 1802mm in width, 1466mm in height, and a wheelbase of 2700mm.
1
0
Share

How to Add Antifreeze to the Encore?

To add antifreeze to the Encore, follow these steps: First, drain the old antifreeze and flush the channels with clean water. Wait approximately one hour for the water to drain completely. Then, pour the new antifreeze into the radiator through the water pipe. If there is air in the radiator, start the engine to expel the air before continuing to fill the radiator with antifreeze until it is full. The Encore is a compact SUV under SAIC-GM Buick, with dimensions of 4295mm in length, 1798mm in width, and 1616mm in height, and a wheelbase of 2570mm. The vehicle comes standard with electronic safety systems such as ESC (Electronic Stability Control), ROM (Roll Over Mitigation), HSA (Hill Start Assist), CBC (Cornering Brake Control), and TPMS (Tire Pressure Monitoring System).
2
4
Share

What Causes a Slight Delay in Car Startup?

Car startup delays can be caused by poor fuel quality, carbon buildup, or dirty components. Here are the specific reasons: Poor fuel quality: If your car suddenly starts normally but then experiences delayed startups, consider whether you've recently switched to gasoline with a different octane rating or from a different source. Carbon buildup or dirty components: Throttle body: Carbon deposits on the throttle body can affect the sensitivity of the throttle and air intake, causing delayed or incorrect signals from the ECU, which may prevent the car from starting. Fuel injectors: Fuel injectors can easily accumulate sticky deposits that obstruct normal fuel injection, leading to poor gasoline atomization. This causes delayed ignition and makes the car difficult to start. Spark plugs: Excessive carbon buildup on spark plugs or air leaks at the junction between the metal and ceramic parts can both result in poor ignition. If your car experiences slight startup delays, it's recommended to check the fuel octane rating and inspect for carbon buildup or dirty components, then visit a 4S shop for diagnosis and repairs.
15
1
Share

Can Cars Be Modified with Xenon Lights?

Directly replacing bulbs on the original vehicle is illegal, but installing only lenses is permissible. A bi-xenon lens combined with xenon lights will not affect oncoming traffic. Additional information: 1. Replacing halogen bulbs with xenon bulbs: Since the market has introduced xenon bulbs compatible with H7, H4, H3, H1, HB3, HB4, and other halogen bulbs, almost all vehicle models can use them. 2. Replacing the entire headlight assembly: This modification method primarily uses original xenon headlights, which combine xenon light sources with specially designed light distribution mirrors and reflectors, making it the most ideal modification approach. 3. Installing xenon auxiliary lights on the front or roof of the vehicle: This modification is relatively flexible. Users can select suitable products based on the vehicle's front styling and personal preferences, choose reasonable installation positions, and meet personalized needs. Xenon auxiliary lights are mainly used for high beams, with outer diameters ranging from as small as 80~90 mm to as large as 200 mm, suitable for different vehicle types such as trucks, off-road vehicles, and sedans.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.