What Do the Wuling Hongguang Dashboard Lights Indicate?

1 Answers
VonCora
07/30/25 4:21am
Wuling Hongguang dashboard lights represent the following: 1. Indicator Lights: The most common lights seen while driving, such as lighting signal lights, turn signal lights, parking lights, etc. Their function is to indicate the status of various vehicle features. 2. Warning Lights: These have an alert function, such as fuel indicator lights, door status indicator lights, seat belt indicator lights, etc. Generally, warning lights turn off after the driver performs the corresponding action. For example, the seat belt indicator light turns off once the seat belt is fastened. 3. Fault Indicator Lights: These are the most critical indicator lights, such as generator fault indicator lights, transmission fault indicator lights, etc. These fault indicator lights rarely illuminate under normal circumstances, or they may light up briefly when starting the engine and then turn off. If a fault indicator light remains on continuously and is accompanied by a warning sound, it indicates that the vehicle has developed a fault or abnormality.
Was this review help?
11
3
Share
More Forum Discussions

Are the left and right lights positioned as up-left and down-right?

Pushing the lever upwards activates the right turn signal, while pushing it downwards activates the left turn signal. Additional information about turn signals is as follows: 1. Introduction: Turn signals are crucial indicator lights that activate when a vehicle turns, alerting surrounding vehicles and pedestrians. The turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, with left and right alternating flashes for continuous operation. Turn signals utilize flashers to achieve blinking effects, mainly categorized into three types: resistance wire type, capacitor type, and electronic type. 2. Usage: Turn signals are the primary devices indicating a vehicle's dynamic information, installed at the front and rear of the vehicle. They activate during turns, enhancing road safety. Proper use of turn signals allows others to anticipate the vehicle's movement and make correct judgments.
13
1
Share

How Long Does It Take to Fully Charge a BYD EV with Slow Charging?

When charging a BYD electric vehicle, it first takes a considerable amount of time to preheat the battery (to reach the set value) before entering the normal charging state. Charging at home with 220V electricity takes about 9 hours, consuming approximately 15 kWh. At professional charging stations, it takes 15 minutes to half an hour. Below is relevant information: 1. Electric Vehicles: An electric vehicle (BEV) refers to a vehicle that uses an on-board power source as its power, drives the wheels with an electric motor, and meets all the requirements of road traffic and safety regulations. Due to its relatively smaller environmental impact compared to traditional vehicles, its prospects are widely optimistic, although current technology is not yet mature. 2. How Electric Vehicles Work: Working Principle Battery – Current – Power Regulator – Motor – Power Transmission System – Drives the Vehicle (Road).
10
3
Share

Which car brand features a snake in its logo?

The car brand with a snake in its logo is Alfa Romeo. Its models include: Giulia, Giulia Quadrifoglio, Stelvio, Stelvio Quadrifoglio, Giulias, etc. Taking the 2020 Giulia as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, with a wheelbase of 2820mm and a fuel tank capacity of 58 liters. The 2020 Giulia features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T naturally aspirated engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
12
0
Share

Do new energy vehicles consume electricity quickly on highways?

New energy vehicles consume electricity quickly on highways. Reasons for high electricity consumption: Both new energy vehicles and fuel-powered vehicles need to overcome two forces during driving: ground friction and air resistance. The ground friction on highways remains relatively constant, but air resistance increases with speed. To be precise, both new energy vehicles and fuel-powered vehicles require more energy as speed increases. Methods to reduce electricity consumption for new energy vehicles: Maintain a moderately low speed; Avoid sudden acceleration and deceleration; Keep windows closed when driving at high speeds; Avoid driving on poor road conditions; Use the air conditioning system in recirculation mode as much as possible; Control the load; Reduce the use of high beams; Charge and maintain the vehicle regularly; Pay attention to tire pressure; Monitor battery operating temperature; Regularly maintain the lubrication system.
1
3
Share

How many points are deducted for making a U-turn by crossing the central divider?

Making a U-turn by crossing the central divider will result in a deduction of 12 points. Relevant legal basis: According to Article 17 of the "Highway Traffic Management Regulations of the People's Republic of China", when motor vehicles are driving normally on highways, they must comply with the following regulations: no reversing, no driving in the opposite direction, no making U-turns or turns by crossing the central divider; no test driving or learning to drive motor vehicles; no overtaking or parking on ramps, acceleration lanes, or deceleration lanes. Precautions for safe driving: Adjust speed at any time according to road conditions, traffic flow, and weather conditions; remember to take a break every two hours during long-distance driving; concentrate on driving and avoid behaviors such as using mobile phones or eating.
9
3
Share

What is the AC in a car's air conditioning system?

AC in a car's air conditioning system refers to the compressor switch, which is the cooling switch for the air conditioning. The functions of the air conditioning system are: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Keeping the air clean and preventing bacterial growth; 4. Preventing window fogging; 5. Adjusting the cabin temperature. The maintenance methods for the air conditioning system include: 1. Regularly cleaning the air conditioning vents; 2. Timely maintenance of the air conditioning condenser; 3. Regular cleaning or replacement of the air conditioning filter. Precautions for using the air conditioning system are: 1. Avoid setting the temperature too low; 2. Controlling the direction of the air vents; 3. Avoiding prolonged use; 4. Occasionally using higher fan speeds; 5. Turning off the air conditioning when driving at low speeds.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.