···
Log in / Register

What do the symbol lights on the Reiz dashboard indicate?

4 Answers
LaGabriella
07/28/25 7:36am
Symbol lights on the Reiz dashboard include the oil pressure warning light and coolant temperature warning light. Details are as follows: Oil Pressure Warning Light: This symbol indicates whether the oil pressure is normal. If it illuminates while driving, the vehicle should not continue to operate. Continuing to drive may cause severe damage to the engine. Coolant Temperature Warning Light: This light activates when the coolant temperature is either too high or too low. It appears blue when the temperature is too low and red when it's too high. Some vehicles display coolant temperature via a gauge on the dashboard, where the needle moves up or down according to the temperature. Seatbelt Reminder Light: Most modern vehicles are equipped with a seatbelt reminder light. It features a red humanoid figure with a diagonal band across its chest, resembling a small figure holding a sword. The light turns off when the seatbelt is fastened or when exiting the vehicle.
Was this review help?
1
2
Share
MirandaDella
08/11/25 2:58pm
I've driven the Toyota Mark X several times, and dashboard warning lights coming on is quite common—it's like the car talking to you, signaling there's an issue. The specific action depends on which light appears: if it's the engine-shaped light, it could indicate excessive emissions or an oxygen sensor problem; an oil can light means oil pressure might be low, requiring immediate parking for inspection; a flashing battery light suggests potential alternator failure. Ignoring these may lead to roadside breakdowns or even damage critical components. Make it a habit to check the dashboard before driving—don't skip this step. If a light illuminates, prioritize finding a safe spot to stop, then refer to the owner's manual or contact a dealership for advice.
Was this review help?
18
0
Share
Expand All
Venus
09/28/25 2:28am
Last time I went on a road trip with my Toyota Mark X, the dashboard suddenly flashed a yellow warning light, which made me quite nervous. It turned out to be slightly low tire pressure, and adding some air solved the problem. When warning lights come on, it's never a trivial matter—your car is alerting you to potential issues, whether it's a sensor glitch or an actual malfunction. If a red light appears, like the brake warning light, the risk is even greater, and immediate action is required. Don't push your luck—find a service area to pull over, perform a quick check of fluids or wiring, and call for assistance if needed. Developing good maintenance habits, such as regular dust cleaning and oil changes, can help minimize these scary moments.
Was this review help?
9
5
Share
Expand All
Santos
11/11/25 4:22am
Dashboard warning lights are serious signals, especially for vehicles like the Reiz, indicating potential safety risks. Common engine light alerts may warn of emission errors; oil pressure light signals potential leaks. Continued driving could lead to accidents or component failure. It's advised to stop and turn off the engine immediately—don't attempt DIY repairs for complex faults. Seek professional mechanics or authorized dealerships directly. Safety comes first—cars can be repaired, but personal safety isn't negotiable. Regular comprehensive inspections are key to prevention.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Motorcycle Gear Shifting Tips Mnemonic?

Motorcycle gear shifting tips mnemonic is as follows: 1. Starting: After starting the engine, it needs to warm up for 3-5 minutes before you can start moving. Engine warm-up is a task that should not be overlooked, especially when the surrounding temperature is low, it becomes even more important, but you should not rev the throttle to speed up the warm-up. An engine that is not sufficiently warmed up will increase wear on components such as the cylinder, piston rings, and rocker arms during operation. 2. Before starting: You should first observe the surrounding situation and give a signal. The key to starting is the coordination between the throttle and the clutch. Hold the clutch lever, engage a low gear, gradually release the clutch lever with your left hand while slowly increasing the throttle with your right hand. If the engine tends to stall, quickly add some throttle; if the engine speed is high, reduce the throttle.
13
3
Share

What to Do If Your Car Gets Scratched While Parked on the Roadside?

When most car owners purchase commercial auto insurance, they typically opt for coverage such as collision insurance, third-party liability insurance, and no-deductible coverage, which can be considered the standard package for car owners. In the event of your beloved car being scratched without identifying the responsible party, the car owner can call the insurance company to file a claim. In such cases, the insurance company will reimburse the expenses through the collision insurance. However, the insurance will only cover 70% of the damages, leaving the remaining 30% to be resolved by the car owner. Since parking fees are collected, there is an obligation to assist the car owner in retrieving surveillance footage to locate the responsible party. If the responsible party cannot be found, the incurred losses can legally be claimed for compensation.
11
3
Share

How many kilometers can a car run without engine oil?

Under the conditions of 70~90km/h, it can safely travel up to 120km at most. The following are the specific details: 1. Case: While starting the car engine, drain all the engine oil inside the car, and then use a hair dryer to blow away the residual oil on the engine and oil circuit. After adding Mo'an metal friction reduction and repair agent, the car without oil lubrication safely traveled 120km under the condition of 70~90km/h. Throughout the journey, the vehicle had no abnormal noise, and the engine worked normally. 2. Engine oil: Engine oil refers to the lubricating oil specially used in internal combustion engines. In addition to lubrication, it also has functions such as cleaning, rust prevention, and cooling. Although a car without engine oil can run, exceeding a certain distance will increase the wear and tear of the car and may also cause traffic accidents. Therefore, regular oil changes are very important for cars.
14
0
Share

How to Adjust the Clock in Honda City?

There are 3 methods to adjust the clock in Honda City: 1. Press the function button to select time setting; 2. Use the knob to select the time; 3. Press the middle SET/SELECT button to confirm the time. Below are some related information about the City: 1. Powertrain: The overseas version of City adopts the new EarthDreams series engines: the 1.3L version has a maximum power of 73kW, while the 1.5L version delivers 96kW. The transmission system offers two options: 5-speed manual and CVT. Additionally, the overseas version is also equipped with a 1.5L DOHC i-DTEC diesel engine. 2. Exterior design: The front fascia design is quite similar to that of the Fit. 3. Body dimensions: The new City has increased in size with length/width/height measuring 4440/1695/1495mm respectively, and a wheelbase of 2600mm.
10
2
Share

What to Do If the Baojun 310 Air Conditioning Is Not Cooling?

Baojun 310 air conditioning not cooling measures introduction: If the vehicle's air conditioning cooling effect is poor, the main considerations are insufficient refrigerant or leaks in the refrigerant lines. The conventional approach is to replace the air conditioning filter and add some refrigerant to test. Below are the reasons why the Baojun 310 air conditioning may not be cooling: 1. Expansion valve damage: This prevents the formation of high pressure in the system before the expansion valve, and the high-pressure refrigerant cannot reach the required 150Kpa pressure. As a result, the evaporator behind the expansion valve fails to cool, leading to poor air conditioning performance. 2. Internal wear of the air conditioning compressor: This causes the pressure between the air conditioning compressor and the expansion valve to fail to reach 150Kpa to 200Kpa, preventing normal circulation of the refrigerant in the system and resulting in poor cooling.
18
5
Share

Can motorcycle drum brakes be replaced with disc brakes?

Motorcycle drum brakes can be replaced with disc brakes. If converting the front wheel to disc brakes, it requires replacing the rim, shock absorbers, and adding a complete disc brake system. For rear wheel conversion, modifications include the rim, rear swingarm, brake caliper, etc. Generally, front wheel conversion is relatively easier, while rear wheel modification is more challenging. Additional information: 1. Principle of disc brakes: The working principle of a disc brake system involves installing a disc that rotates synchronously with the wheel on the hub, and mounting calipers on the front fork and frame. The brake pads inside the calipers clamp the disc to achieve braking. 2. Characteristics of disc brakes: (1) Disc brakes have better heat dissipation than drum brakes, reducing the likelihood of brake fade and failure during continuous braking. (2) The size change of the brake disc after heating does not increase the travel of the brake pedal. (3) Disc brakes do not have the self-servo effect of drum brakes, resulting in more balanced braking force between the left and right wheels.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.