What do the red, yellow, and blue labels on car batteries mean?

1 Answers
McFelix
07/29/25 4:36pm
Battery yellow label and blue label differ in performance, warranty period, and price. The yellow label battery offers stable performance with a two-year warranty, while the blue label comes with an 18-month warranty. In terms of price, the yellow label is more expensive than both the blue and black labels. The red standard primarily targets household users, whereas the blue standard is designed for automotive applications. Batteries with red and blue labels use different plate materials, resulting in performance differences. Here are details about car batteries: 1. Battery terminals: The red label on a battery terminal indicates the positive pole, while the blue label marks the negative pole. Manufacturers use these labels to help car owners easily distinguish between the positive and negative terminals. 2. Charge indicator: Near the battery terminals, symbols for positive and negative poles are also marked. The battery charge indicator, also known as the "magic eye," displays black when charging is needed, green for good condition, and white indicating insufficient fluid requiring replacement. If the indicator shows black, the battery needs charging as it has already experienced over-discharge. The charging capacity from the car alone is insufficient, and a charger must be used. It takes about 20 hours to fully charge a car starting battery.
Was this review help?
4
4
Share
More Forum Discussions

How to Set the Date on a Mondeo?

The method to set the date on a Mondeo is as follows: 1. Use the CLK button on the screen to display and set the time; 2. Press and hold the CLK button for about 5 seconds until the time display on the screen starts flashing; 3. Use the adjustment buttons to set the hour first, then the minutes; 4. After selecting the desired time, press the CLK button to confirm. The Mondeo is a mid-size sedan under Changan Ford, with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with a 1.5T 182-horsepower L4 engine, paired with a 6-speed automatic transmission. The tire specification is 235/50R17, and the spare tire is a non-full-size tire.
19
3
Share

Is it necessary to clear fault codes for vehicle inspection?

Fault codes on the dashboard will affect the vehicle inspection. It is recommended to clear them in advance at a repair shop using a decoder. Vehicle inspection is conducted once a year for vehicles under 10 years old, and every 6 months for vehicles over 10 years old. For small and micro non-operational passenger vehicles, inspection is required once every 2 years within the first 6 years, once a year after 6 years, and every 6 months after 15 years. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection (Vehicles-inspection), also known as motor vehicle inspection. Depending on the usage nature of the motor vehicle, the inspection items and scope vary. 2. Inspection items: According to the definition in RB/T218-2017 "Requirements for Qualification Assessment of Inspection and Testing Institutions - Motor Vehicle Inspection Institutions", motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive performance inspection of motor vehicles.
1
4
Share

How Long Can You Drive with the Mercedes Engine Yellow Light On?

This commonly referred to yellow engine warning light is also known as the fuel injection system malfunction indicator. As long as there are no noticeable abnormalities in engine power and sound, you can continue driving. This is because the ECU (Engine Control Unit) has a fault substitution program. Specific details are as follows: 1. Engine Fault Signal: The engine fault signal is issued by the ECU, which controls all electronic components of the engine, including the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering systems such as intake, exhaust, fuel, ignition, and timing. If the engine warning light is on, it is essential to have it checked at a nearby repair shop. 2. Coolant Temperature Gauge: First, check the coolant temperature gauge and oil pressure warning light. If these indicators are not showing any warnings, the vehicle can still be driven. However, it is crucial to control the speed and promptly drive to a service station for inspection.
20
1
Share

What is the reason for the flashing handbrake light in a Toyota Crown?

Analysis of the reasons for the flashing handbrake light while driving: 1. Poor contact of the handbrake switch when the handbrake is pulled up, causing the light to flash. 2. Poor contact of the handbrake light power wire, or a broken wire harness. 3. Poor contact of the handbrake indicator light on the dashboard, causing the light to flash. Below are the solutions for the flashing handbrake light: 1. Remove the handbrake cover, locate the handbrake switch, and first inspect the switch. 2. Use a multimeter to check the voltage of the red wire. 3. You can unplug the electrical connector of the handbrake switch. If the light continues to flash, it indicates an issue with the dashboard. If the problem disappears, it means the flashing was caused by poor contact of the switch.
12
4
Share

How Many Horsepower Does a 1110 Diesel Engine Have?

The power of a 1110 diesel engine is 19.97 horsepower, approximately equal to 20 horsepower. Below is an introduction to calculating automotive horsepower: 1. Calculation formula: The horsepower of a car refers to the unit of engine power, representing the engine's working capacity per unit of time. Calculation formula: Power (w) = 2π × Torque (N-m) × Speed (rpm) / 60. Simplified calculation becomes: Power (kw) = Torque (N-m) × Speed (rpm) / 9549. 2. Introduction to horsepower: Horsepower is a commonly used unit of power measurement in engineering, a physical quantity that measures the top speed of a car. The higher the horsepower, the higher the top speed of the car. Torque is a physical quantity that measures the acceleration capability of a car. The greater the torque, the better the acceleration performance of the car. Maximum power is generally expressed in horsepower (PS) or kilowatts (kw), with 1 horsepower equal to 0.735 kilowatts.
18
3
Share

Is the XPeng P7 a pure electric vehicle?

XPeng P7 is positioned as a mid-size pure electric coupe. In terms of appearance: The XPeng P7 features the streamlined silhouette characteristic of a coupe, with low-drag design elements such as a fastback extending into a ducktail spoiler, semi-hidden wipers, low-drag exterior mirrors, as well as AGS active grille shutters and an almost completely flat underbody. These features play a key role in reducing the drag coefficient and improving range. In terms of configuration: The XPeng P7 offers three variants: Rear-Wheel Drive Long Range, Rear-Wheel Drive Super Long Range, and All-Wheel Drive High Performance. The Rear-Wheel Drive Super Long Range version is equipped with a motor delivering a maximum power of 196kW (267Ps) and a range exceeding 650km, while the All-Wheel Drive High Performance version boasts a system maximum power of 316kW (430Ps) and a range exceeding 550km.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.