What do the numbers 5w-30 in engine oil represent?

What kind of driver's license is required for a three-wheeled motorcycle?

A three-wheeled motorcycle requires a Class D driver's license. The Class D license allows driving three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. Other permitted vehicle types under this license include Class E and F. Examination subjects for the Class D license: Motorcycle license tests consist of Subject 1, Subject 2, and Subject 3 (road driving skills test and safe civilized driving knowledge test). All types of driver's licenses require completion of the probationary period before additional licenses can be added. Other permitted vehicle types under Class D license: Motorcycle licenses are divided into three categories: D, E, and F. Among them, Class D is the highest level of motorcycle license, which also permits driving vehicle types covered by Class E and F licenses. Class E is for ordinary two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. Class F is for motorcycles with an engine displacement of 50ml or less or a maximum design speed of 50km/h or less.

11

2

Share

What lights should be used when passing through an intersection without street lights?

When passing through an intersection without traffic signals, you should alternately use high and low beams. Here are the relevant instructions: Correct use of lights: When passing through an intersection without traffic lights, alternately use high and low beams more than twice, slow down in advance, and signal by alternating between high and low beams, paying close attention to the traffic conditions ahead. Situations for using other lights: Driving at night without street lighting or under poor lighting conditions—turn on the headlights; meeting non-motor vehicles on narrow roads or bridges at night—use low beams; passing through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic signal control at night—alternately use high and low beams (flashing more than twice).

18

2

Share

What Causes Antifreeze in the Urea Tank?

Urea tank contains antifreeze due to the presence of heating devices and external low temperatures. Heating Devices: The urea tank is equipped with a urea temperature sensor and a urea heating device. The post-processing system and some pipelines are also fitted with heating electromagnetic coils or solenoid valves. When the urea temperature is detected to be below 0°C, the solenoid valve automatically opens to introduce coolant to heat the urea until it reaches 7°C, at which point it stops working. External Low Temperatures: In northern or cold regions, freezing at temperatures below -11°C is quite normal. Simply start the engine for preheating. At this time, the system may report a blockage fault, which can be ignored. After preheating for a while, turn off the engine and restart it, and it will return to normal. There is no need to worry about the urea pump or pipelines freezing and blocking, as long as no improper operations are performed. The final step of the post-processing system is the system draining process, which automatically removes residual urea solution from the system and pipelines to prevent crystallization (freezing).

15

5

Share

What Causes Vibration at 130 km/h but Not at 120 km/h on the Highway?

The reason for vibration at 130 km/h but not at 120 km/h on the highway may be due to excessive carbon deposits, fuel supply system failure, etc. Excessive Carbon Deposits: If there is severe carbon buildup inside the engine cylinders, it can lead to clogged spark plugs and valves, directly causing the car to vibrate at idle. If the car's acceleration performance has significantly deteriorated and the vibration is persistent, it may be time to consider cleaning the engine cylinders. Fuel Supply System Failure: Unstable fuel pressure can easily cause fluctuations in the concentration of the air-fuel mixture, not only resulting in vibration but also causing unstable idle speed. First, consider replacing the fuel filter, as the filter element may become clogged after prolonged use. Then, check the fuel pressure that bypasses the fuel filter. If it is abnormal, the issue might be with the fuel pump.

11

2

Share

What kind of adhesive is more suitable for car door sealing strips?

Car door sealing strips can be adhered more appropriately using 502 glue or silicone sealant. The detachment of car door sealing strips is mostly caused by aging, so regular maintenance should be observed. Pay attention to the force when opening and closing the car door, and avoid excessive force, which can easily cause damage to the sealing strips. After driving in the rain or washing the car, the moisture in the door gaps should be wiped dry to prevent acidic rainwater or detergent residues from corroding the sealing strips. If aging or cracking of the sealing strips is found, they should be replaced promptly. Dangers of sealing strip detachment: Blockage of drainage holes: After installing sealing strips, some drainage holes may be covered, preventing rainwater from draining out during rain, which can lead to rusting of the door metal and even water leakage into the car; Aging of adhesive tape: If the adhesive is not strong enough, the sealing strips may detach after some time of use, and may even stick to the car's paint; Affects aesthetics; Sound insulation effect is not obvious. Precautions: Car sealing strips should be checked from time to time for cracks, especially for any broken areas, and should be repaired in time to prevent heavy rain leakage. You can purchase special adhesive for car sealing strips to stick them back. If the damaged area is too large to repair, then professional maintenance personnel should be consulted to handle it.

13

3

Share

How Long Does Sheet Metal Repair Take?

Typically, sheet metal repair and painting take about two days. Of course, if the auto repair shop isn't too busy, it can be done in one day if they work efficiently. Here's some relevant information: Sheet metal repair and painting: Many car owners often face situations where their beloved vehicles get scratched or dented. When this happens, a professional restoration technique is needed to bring the car back to its original condition—this technique is called sheet metal repair and painting. Simply put, it involves repairing the deformed metal body through sheet metal work, followed by applying a specialized paint to the restored exterior, allowing the car to return to its former appearance. Important note: When getting sheet metal repair and painting for your car, it's best to go to high-quality repair shops to ensure better service quality.

16

5

Share

What do the numbers 5w-30 in engine oil represent?

What kind of driver's license is required for a three-wheeled motorcycle?

What lights should be used when passing through an intersection without street lights?

What Causes Antifreeze in the Urea Tank?

What Causes Vibration at 130 km/h but Not at 120 km/h on the Highway?

What kind of adhesive is more suitable for car door sealing strips?

How Long Does Sheet Metal Repair Take?

What is the Scrapping Age Limit for Vehicles?

What is the reason for showing unreturned flow during vehicle transfer?

What is the function of the cylinder head cover?

How to Determine the Production Date of Car Seat Belts?